₦airaland Forum

BarryLi:
The charcoal briquette machine is important forming equipment in the production process of charcoal making. It can make various kinds of coal powder into the coal briquette of different shapes. The charcoal briquette can make full use of pulverized coal resources, reduce fuel costs, and increase the calorific value of coal, which has high economic benefits. The finished charcoal briquettes have high density, good strength, and are smokeless and tasteless during processing. They have been widely used in large-scale barbecues, boiler heating, hookah, energy, transportation, agriculture, industry, and other applications.

The principle of the charcoal briquette extruder
The charcoal briquette machine adopts a new screw extrusion principle to squeeze the prepared pulverized coal into a certain strength and predetermined shape of coal sticks. Our charcoal briquette machine adopts the hard-tooth surface reducer, which is small in size and high in load capacity. The impeller inside the charcoal briquette extruder is designed with thickened blades, and the impeller and the inner liner of the cylinder are made of wear-resistant precision casting materials. After the materials enter from the feeding port, they will be squeezed forward through the inner cone mold to make the compression between the materials is extremely tight. There is strong friction between the material and the cylinder, which causes the temperature of the coal powder to rise while generating heat, the moisture and the binder are more uniform, the plasticity of the coal is also greatly increased, and finally it is extruded in the flat part of the mold.

The structure of the charcoal briquette extruder
The main structure of the coal stick machine is composed of a motor, a reducer, a screw propeller shaft, a mold, and the final cutter.
We provide customers with a large number of different molds to choose from, and we can also customize them according to customer needs.

Three different cutting methods
1.Pneumatic cutting device
This kind of pneumatic cutting machine is generally equipped at the exit of the charcoal briquette machine and equipped with an induction device. When the coal rod reaches a certain length, it will automatically cut.
2. Cubic charcoal cutting machine
Cubic-charcoal-cutting-machine
This cubic cutting device is used to cut cubic coal. The cut coal rods pass through this machine to become coal blocks of uniform shape and size.
3. CNC cutting device
CNC cutting device
This is our latest coal cutting machine. It adopts an intelligent control system, the cutting length of coal rods can be adjusted freely and can be used to cut coal rods of various shapes.

Molding poor solution
Add adhesiveWhen solving the problem of the molding machine, adding a binder is a common solution. Its function is to increase the viscosity between coal powder. However, there are many types of adhesives and should be handled with care. In addition, the binder is made according to the characteristics of a certain material, so it is best to do experiments first, so as to ensure the molding effect after adding.
Change the physical state of pulverized coalThe change of the physical state is to change the distance between the pulverized coal molecules, which is more conducive to the adhesion between the pulverized coal. Time has proved that the smaller the particle size of coal powder, the greater the attraction between molecules. Therefore, before entering the rod coal machine, a large piece of pulverized coal must be crushed, and the coal gangue inside must be screened out to solve the problem of forming from the physical state.
Control water contentThe forming problem of pulverized coal is not only related to the particle size, particle size, and hardness of the pulverized coal but also related to the moisture content. The molding effect is different under different moisture content. Therefore, before the large particles or large particles of coal powder are fed into the coal stick extruder, it is not only pulverized but also a certain amount of water needs to be added. But when the moisture content is too high, it is not conducive to molding. At this time, it is necessary to squeeze it out after drying with drying equipment.

Tips for using charcoal briquette machine
Before using the machine, it must be operated empty, check whether all nuts are loose and tightened, check whether there are foreign objects or abnormal noises, and check whether the energy position is accurate.
To use the coal stick machine, you must first test the machine to check whether the machine is running normally. Before testing the machine, you must add an appropriate amount of lubricating oil in a stable position with a moderate amount of oil.
Before starting each shift, check whether the position of the machine is sensitive and there is no abnormal sound, and the machine can be used for consumption after 2 to 3 seconds of dry operation.
In order to prevent the coal rod generator from overloading, the user must install a DC voltmeter and adjust the material and moisture according to the DC ammeter.
The raw materials must be processed before production. The maximum particle size is less than 2 mm. After adding water, add the binder and curing agent, and use it after 24 hours of stirring. If the discharge port of the coal rod machine is blocked, single wood or bamboo rods must be used for excavation, and non-metal rods must not be used.
The bearings of the rotating position of coal stick machine tools must be injected with smooth oil regularly, and the measurement of the bearing position should not exceed 60 degrees.
The machine must be shut down before unloading. After the cylinder of the coal sliver machine is emptied by objects, shut it down, assemble the head, clean it and reinstall it, and prepare for work.

Unazzi:
Still available

Unazzi:
Still waiting for the lucky buyer

Unazzi:
Still waiting for the lucky buyer

santos41:
How much?

Unazzi:
Place your orders

Unazzi:
Place your order

Unazzi:
Land documents are perfected and available for viewing.

Location is fast developing

This is an urgent deal. The owners are selling for urgent business needs.

Call or Whatsap 0 8 0 3 8 3 2 4 6 8 8 if interested.

Price:N200m negotiable

Unazzi:
Estate land for distress sale:

Location: Giri, Abuja
Size: 39.9 Hectares
Purpose: Residential
Title: R of O
Asking price: N200m

Call or Whatsap: 0 8 0 3 8 3 2 4 6 8 8

Unazzi:
Get top quality from us

Unazzi:
Contact us for great deals

Unazzi:
We are now ready to take your bulk orders of Rice, Rice Padd, Beans, Ginger, Sorghum, Maize, Sesame seeds, Groundnut, Onion, Cashew nut, Sweet potatoes, Charcoal, Live goats, bulk egg, Yam, etc.

We supply to all states in Nigeria and also do exports (FOB) of some.

Contact us for great deals.

Call or Whatsap: 0 8 0 3 8 3 2 4 6 8 8

dedons:
Nice one

jades5050:
I mean rice in 50kg bag
My location is Ibadan Oyo state
We are having new rice now because farmer are harvesting now so let know your price per whatever bag you have either 50 kg or 100kg
Thanks

Doitryte:
How much is your rice and how much does it cost to supply 200 bags to Lagos? Then how many days will it take to get them to Lagos?