RELEVANT OIL AND GAS TRAINING IN PORT HARCOURT 2012
Engineering, Training, Recruitment & Consulting!
SIEC as a body is made up of talented engineers ranging from mechanical, chemical, petroleum, electrical engineers & Industrial scientist covering all facets of engineering profession.
We undertake projects related to virtual simulation of reservoir to the simulation of process plant and power plants.
GPS tracking occupies a branch of SIEC services, monitoring evaluation and control of assets.
Our website design expert stands out as the best among rival to deliver quality and great site experience.
We are your best bet for engineering, training and consultancy services, delivering cutting edge technologies with our team of engineers eager to satisfy your needs.
SIEC is a corporate partner in Human capital Development in the oil and gas business registered with corporate affairs commission in Nigeria, providing training for graduates, undergraduates, working class, and groups or a body with special interest in engineering design, oil and gas asset monitoring and control.
In line with local content initiative, and implementation which is widely gaining acceptance among Nigerians, SIEC was borne out of that concept to compete favorably and bridge the gap between local and international engineering practice.
Additional services rendered are monitoring, evaluation and control of movable assets using GPS trackers, Instrumentation and control are integral part of the company services.
Furtherance to its services, deployment of efficient and dependable personnel who have gained mastery of these design software packages are deployed to various companies for interviews through our network of contacts in various oil and gas firms resident in Lagos and Port Harcourt. We are fully equipped with excellent workforce for development of tomorrow.
List of training programmes!
OIL AND GAS TRAINING
PROCESS DESIGN USING ASPEN HYSYS 7.1 (SIMULATION COURSE)
Scope
•Introduction to HYSYS
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Oil Characterization
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG Process Plant Costing
• Reporting in Aspen HYSYS

At the end of the training real projects with live datas from AGIP Oil Co. will be used to simulate
***Obiafu/Obrikom Gas dehydration Plant
***Gas/Crude gathering system live datas from SHELL Oil Co.
***Hydraulic Analysis performed on Vessels
HYSYS DYNAMIC SIMULATION
The dynamic simulation for equipment sizing and process control
1. REVISION OF STEADY STATE
2. BASIC CONTROL THEORY
3. PRESSURE-FLOW RELATIONSHIP
4. TRANSITIONING FROM STEADY
STATE TO DYNAMICS-MODYFYING THE STEADY STATE
5. SIZING UNIT OPERATIONS (DE-PROPANIZER COLUMN, SEPERATORS etc)
6. USING THE DYNAMICS ASSISTANT AND ACTIVATING THE DYNAMIC MODE
7. INSTALLING THE CONTROLLERS (PID)
8. SETTING UP STRIP CHARTS
9. RUNNING AND MONITORING DYNAMIC SIMULATION.
10. ADVANCED DYNAMICS
Date: Aug 6th 13th, 20th, 27th, Sept 3rd, 10th, 24th, Oct 2nd, 15th, 29th, 2012 etc…
Venue: SIEC CONSULT
315 Aba Road
2ND FLOOR, IZZI HOUSE BY IZZI BUS STOP
ABA ROAD, PORT HARCOURT
RIVERS STATE
Phone: +2348035992896, +2348038629726, +2348064919891, +2348122965823, +2348154645666
Special considerations for corp members!
Email: controlauto@ymail.com or info@siecconsult.com
Website; www.siecconsult.com for registration

Plant Design Management System (PDMS)
1. PLANT/PIPE DESIGN (PDMS) PDMS SCOPEs.
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors) for civil and structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
Standard Used……………………… ASME B31.3 & B31.4 CODE
Design Project for Appraisal; Interpretation and Design of a liquefied petroleum gas (LPG) plant
Date: Aug 6th 13th, 20th, 27th, Sept 3rd, 10th, 24th, Oct 2nd, 15th, 29th, 2012 etc…
Venue: SIEC CONSULT
315 Aba Road
2ND FLOOR, IZZI HOUSE BY IZZI BUS STOP
ABA ROAD, PORT HARCOURT
RIVERS STATE
Phone: +2348035992896, +2348038629726, +2348064919891, +2348122965823, +2348154645666
Special considerations for corp members!
Email: controlauto@ymail.com, or info@siecconsult.com
Website; www.siecconsult.com for registration

FULL PACKAGE AUTOCAD (2D, 3D & ISOMETRICS)
2D DRAFTING COURSE CONTENT
a. AutoCAD general
b. AutoCAD mechanical
C. AutoCAD PID, piping and instrumentation design
D. AutoCAD structural /architectural.
AUTOCAD 2D DRAFTING
B. AUTOCAD MECHANICAL
1. DESIGN OF BASIC MECHANICAL COMPONENTS. (BOLTS, NUTS, FLANGES, e.t.c)
2. INTERPRETATION OF METRIC AND IMPERIAL STANDARDS AND DESIGN IMPLICATIONS.
3. MACHINE DRAWING
C. AUTOCAD PIPING.
1. PIPE DRAFTING AND DESIGN (PIPE ISOMETRICS, DOUBLE AND SINGLE LINE DRAFTING)
2. PIPING AND INSTRUMENTATION DIAGRAMS (P&ID),
4. PROCESS FLOW DIAGRAMS/SHEETS (PFDs/PFSs)
D.AUTOCAD CIVIL/STRUCTURAL/
1. House plan and elevations
2. BEAMS AND COLUMN DESIGN
3. SLAB DESIGN
AUTOCAD 3D MODELLING
1. Introduction to 3d fundamentals-
BASIC TOOLS (MODELING TOOL, SOLID EDITING, VIEWS, VISUAL STYLES, 3D MODIFY)
2. Modeling of structures (houses, PLATFORMS etc.)
3. Modeling of mechanical parts and components i.e. mechanical coupling
4. Modeling of piping components (elbows, tees, flange, reducer, valves, etc.) FOR 3D PIPING
5. DESIGN OF EQUIPMENTS (pumps, pressure vessels, heat exchangers, e.tc)
6. Project and assessment
2. Prerequisite: All categories of engineering graduates and students
Date: Aug 6th 13th, 20th, 27th, Sept 3rd, 10th, 24th, Oct 2nd, 15th, 29th, 2012 etc…
Venue: SIEC CONSULT
315 Aba Road
2ND FLOOR, IZZI HOUSE BY IZZI BUS STOP
ABA ROAD, PORT HARCOURT
RIVERS STATE
Phone: +2348064919891, +2348035992896, +2348038629726, +2348122965823, +2348154645666

Special considerations for corp members exist!

Email: controlauto@ymail.com, or info@siecconsult.com
Website; www.siecconsult.com for registration

rosyke: RELEVANT OIL AND GAS TRAINING IN PORT HARCOURT 2012
Engineering, Training, Recruitment & Consulting!
SIEC as a body is made up of talented engineers ranging from mechanical, chemical, petroleum, electrical engineers & Industrial scientist covering all facets of engineering profession.
We undertake projects related to virtual simulation of reservoir to the simulation of process plant and power plants.
GPS tracking occupies a branch of SIEC services, monitoring evaluation and control of assets.
Our website design expert stands out as the best among rival to deliver quality and great site experience.
We are your best bet for engineering, training and consultancy services, delivering cutting edge technologies with our team of engineers eager to satisfy your needs.
SIEC is a corporate partner in Human capital Development in the oil and gas business registered with corporate affairs commission in Nigeria, providing training for graduates, undergraduates, working class, and groups or a body with special interest in engineering design, oil and gas asset monitoring and control.
In line with local content initiative, and implementation which is widely gaining acceptance among Nigerians, SIEC was borne out of that concept to compete favorably and bridge the gap between local and international engineering practice.
Additional services rendered are monitoring, evaluation and control of movable assets using GPS trackers, Instrumentation and control are integral part of the company services.
Furtherance to its services, deployment of efficient and dependable personnel who have gained mastery of these design software packages are deployed to various companies for interviews through our network of contacts in various oil and gas firms resident in Lagos and Port Harcourt. We are fully equipped with excellent workforce for development of tomorrow.
List of training programmes!
OIL AND GAS TRAINING
PROCESS DESIGN USING ASPEN HYSYS 7.1 (SIMULATION COURSE)
Scope
•Introduction to HYSYS
• Propane Refrigeration loop
• Refrigerated Gas Plant
• NGL Fractionation Train
• Oil Characterization
• Gas Gathering
• Two-Stage Compression
• Acid Gas Sweetening with DEA
• Natural Gas Dehydration with TEG Process Plant Costing
• Reporting in Aspen HYSYS

At the end of the training real projects with live datas from AGIP Oil Co. will be used to simulate
***Obiafu/Obrikom Gas dehydration Plant
***Gas/Crude gathering system live datas from SHELL Oil Co.
***Hydraulic Analysis performed on Vessels
HYSYS DYNAMIC SIMULATION
The dynamic simulation for equipment sizing and process control
1. REVISION OF STEADY STATE
2. BASIC CONTROL THEORY
3. PRESSURE-FLOW RELATIONSHIP
4. TRANSITIONING FROM STEADY
STATE TO DYNAMICS-MODYFYING THE STEADY STATE
5. SIZING UNIT OPERATIONS (DE-PROPANIZER COLUMN, SEPERATORS etc)
6. USING THE DYNAMICS ASSISTANT AND ACTIVATING THE DYNAMIC MODE
7. INSTALLING THE CONTROLLERS (PID)
8. SETTING UP STRIP CHARTS
9. RUNNING AND MONITORING DYNAMIC SIMULATION.
10. ADVANCED DYNAMICS
Date: Aug 6th 13th, 20th, 27th, Sept 3rd, 10th, 24th, Oct 2nd, 15th, 29th, 2012 etc…
Venue: SIEC CONSULT
315 Aba Road
2ND FLOOR, IZZI HOUSE BY IZZI BUS STOP
ABA ROAD, PORT HARCOURT
RIVERS STATE
Phone: +2348035992896, +2348038629726, +2348064919891, +2348122965823, +2348154645666
Special considerations for corp members!
Email: controlauto@ymail.com or info@siecconsult.com
Website; www.siecconsult.com for registration

Plant Design Management System (PDMS)
1. PLANT/PIPE DESIGN (PDMS) PDMS SCOPEs.
A. Equipment DESIGN (vessels, pumps, heat exchanger, assemblies, air coolers)
B. Piping DESIGN INCLUDING explicit piping for piping engineers
C. Structural steelwork (column, beams, panels and plates, wall and floors) for civil and structural engineers
D. ASL MODELLER (Access, stairs and ladder) for structural and civil engineers
E. Cable trays for electrical and electronics &instrument engineers
2. Production of MTO’s and piping general assembly
3. Conversion from PDMS Draft & Isodraft to AutoCAD format.
4. Customizing PDMS
5. Plant layout and drafting interpretation
6. Using ASME code
Standard Used……………………… ASME B31.3 & B31.4 CODE
Design Project for Appraisal; Interpretation and Design of a liquefied petroleum gas (LPG) plant
Date: Aug 6th 13th, 20th, 27th, Sept 3rd, 10th, 24th, Oct 2nd, 15th, 29th, 2012 etc…
Venue: SIEC CONSULT
315 Aba Road
2ND FLOOR, IZZI HOUSE BY IZZI BUS STOP
ABA ROAD, PORT HARCOURT
RIVERS STATE
Phone: +2348035992896, +2348038629726, +2348064919891, +2348122965823, +2348154645666
Special considerations for corp members!
Email: controlauto@ymail.com, or info@siecconsult.com
Website; www.siecconsult.com for registration

FULL PACKAGE AUTOCAD (2D, 3D & ISOMETRICS)
2D DRAFTING COURSE CONTENT
a. AutoCAD general
b. AutoCAD mechanical
C. AutoCAD PID, piping and instrumentation design
D. AutoCAD structural /architectural.
AUTOCAD 2D DRAFTING
B. AUTOCAD MECHANICAL
1. DESIGN OF BASIC MECHANICAL COMPONENTS. (BOLTS, NUTS, FLANGES, e.t.c)
2. INTERPRETATION OF METRIC AND IMPERIAL STANDARDS AND DESIGN IMPLICATIONS.
3. MACHINE DRAWING
C. AUTOCAD PIPING.
1. PIPE DRAFTING AND DESIGN (PIPE ISOMETRICS, DOUBLE AND SINGLE LINE DRAFTING)
2. PIPING AND INSTRUMENTATION DIAGRAMS (P&ID),
4. PROCESS FLOW DIAGRAMS/SHEETS (PFDs/PFSs)
D.AUTOCAD CIVIL/STRUCTURAL/
1. House plan and elevations
2. BEAMS AND COLUMN DESIGN
3. SLAB DESIGN
AUTOCAD 3D MODELLING
1. Introduction to 3d fundamentals-
BASIC TOOLS (MODELING TOOL, SOLID EDITING, VIEWS, VISUAL STYLES, 3D MODIFY)
2. Modeling of structures (houses, PLATFORMS etc.)
3. Modeling of mechanical parts and components i.e. mechanical coupling
4. Modeling of piping components (elbows, tees, flange, reducer, valves, etc.) FOR 3D PIPING
5. DESIGN OF EQUIPMENTS (pumps, pressure vessels, heat exchangers, e.tc)
6. Project and assessment
2. Prerequisite: All categories of engineering graduates and students
Date: Aug 6th 13th, 20th, 27th, Sept 3rd, 10th, 24th, Oct 2nd, 15th, 29th, 2012 etc…
Venue: SIEC CONSULT
315 Aba Road
2ND FLOOR, IZZI HOUSE BY IZZI BUS STOP
ABA ROAD, PORT HARCOURT
RIVERS STATE
Phone: +2348064919891, +2348035992896, +2348038629726, +2348122965823, +2348154645666

Special considerations for corp members exist!

Email: controlauto@ymail.com, or info@siecconsult.com
Website; www.siecconsult.com for registration

Call 08064919891

c