UBKtech: [b]CONNECT 5 (FIVE) wifi-enabled devices to the Internet on just one Data Subscription!!

SUPPORTED DEVICES; iPAD, iPhone, NOKIA, HTC, Galaxy, BlackBerry, Huawei, Nexus, Surface, Kindle, Android etc

3.5G MiFi is a portable WiFi device that allow users connect up to five (5) WiFi-enabled devices such as Laptops, Tablets, Phones and other such devices simultaneously to the internet.

All you need is one data subscription on the MiFi device, which will create a wireless hotspot for you to hook-up five whole devices to the internet.

This creates a richer browsing experience, as well as amazing cost savings. Mi-Fi works at a distance of up to 10m or 30 ft

Please visit: www.akanawu.com OR Call: 0812-220-9680 For DETAILS

Price: N18,500 [size=15pt]N12,999[/size]

For Enquiries/purchase contact:

Lagos - KETU
Chuks Electronics Nigeria
3 Ikosi Road(Ketu Bus Stop)
Ikosi - Ketu, Lagos
Phone: 0812-220-9680
E-mail: akanawu@yahoo.com
Website: www.akanawu.com

Lagos - IKORODU
EMVEE Technologies LTD
1st Floor, Ajisebutu Complex
#10 Lagos Road (GARAGE)
IKORODU
Phone: 0803-385-4437

ABUJA Office
NUMO BUSINESS CENTRE
21C, Zone 3 Shopping Complex
Wuse Zone 3, Abuja
Phone: 0803-391-8429

ONITSHA Office
Shop FF1/8, 1st Floor
CHIBROSS plaza, #1 Bida Road
Main Market, ONITSHA
Phone: 0815-403-1144

Ekiti State
Phone: 0703-632-2890

Ebonyi State
Phone: 0703-464-3770


USER Guide for 3.5G Mi-Fi Router
1. Register & Activate the SIM of your network of choice (MTN, glo, etisalat or Zain)
2. Fully Charge the battery of the Mi-Fi Router (at least 3hrs via USB)
3. Subscribe to a data plan on the network of your choice (Refer to data plan for details)
4. Insert the SIM into the Mi-Fi router
5. Replace the Battery
6. Power ‘ON’ the Mi-Fi and wait for it to boot (30sec)
7. Search for the wi-fi with your device & Connect (SSID: I5_XXXX)
8. Connect other devices (upto 5) & Enjoy!!

Personalization & Security Settings for Mi-fi Router
(You need to do this to avoid “TAPPING” & Unauthorised access to your Network/Computers)
1. Connect to Internet with the Mi-Fi Router
2. Enter http://192.168.169.1 on your browser
3. Enter the following information an click ‘ENTER’
Username: admin
Password: admin
4. Click on ‘Wi-fi settings’
5. Change Name (SSID) to your preferred Name eg ABCDEFGH1234 & Click ‘NEXT’
6. On 802.11 Authentication select ‘OPEN’
7. Encryption Mode select ‘WPA-PSK/WPA2-PSK’
8. Security option select ‘WPA-PSK’
9. Encryption Algorithm ‘Auto’
10. Setup your & Confirm your ‘WPA pre-shared key’ (password) eg 1234abcd
11. Click ‘NEXT’ & ‘FINISH’
12. Restart your 3G Mi-Fi Router for Changes to take effect
13. Enjoy the Richer browsing experience on your Devices
[/b]