The unit is a Satlook Digital NIT - brand new.Find below d technical specs.

Technical specification.
Input frequency: 920-2150MHz, easily reduced to 250 MHz (max zoom in).
Frequency display: Yes, IF default. All standard LNB L.O. can be setup.
Min level in, About 35 dBuV (noiselevel).
Max level in, About 90 dBuV.
Attenuation: 15 dB manual attenuator on/off.
Display of signallevel (analog): dB-level on LCD and monitor.
Pitch-tone on loudspeaker.
Accuracy: +2 dB (at +20 C)
Display of signallevel (digtal): S/N (signal/noise-ratio)
BER (bit error rate)
Constellationdiagram (QPSK)
Symbolrate readout: 1 – 30 Megasymbol.
Satellite identification: Yes, NIT readout (Network Information Table) according to the
DVB-standard. Identifies Satellite and name of TV- and Radiochannels.
TV/Audio standard: Multi TV/Audio (PAL, NTSC, SECAM).
KU- C-band: Yes, selectable.
Audio bandwidth : Adjustable between 5.5 MHz and 8.5 MHz
Input impedance: 75 Ohm, BNC-connector.
Picture-screen: 4.5”-monitor, svart/vit.
Menus: On LCD 64x128 next to the monitor.
Memory: -100 spectrum pictures can be stored with name.
Stored spectrum can be mixed for easy identification of satellite.
-“Maxhold”-function.
Favouritechannels Both analog and digital frequencies can be stored (with name).
Simultaneous measuring of up to 10 channels at the same time.
Each channel with individual setup of 13/18v and 22 kHz
on/off.
PC-connection Yes, RS232-output
Spänning ut: Yes, 13-18V (can be adjusted).
22 kHz tone: Yes, on/off.
DiSEqC Yes, all 1.0 and 1.1. Also Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and SatSelect.
Battery: Rechargable 12v, 3.5 amp/tim.
Operational: About 1.5 hour on a fully charged battery.
Weight: About 5 kg incl.battery.
Accessories: Nylon carrying-case.
Power-supply of 220v/13.5v, 1.7amp.
Car-charger.
BNC-male/F-female adapter.


I can be reached on 0803-350-1067_____________________________________

Price Pls!!