Pls, do 4.0 inch and 3.5 inch Tecno Android phones have the same width?

theogabriel: Pls, do 4.0 inch and 3.5 inch Tecno Android phones have the same width?

Not at all 3.5 inch tecno phone is not as wide as 4.0 inch

Alfred234: Not at all 3.5 inch tecno phone is not as wide as 4.0 inch

Thank you, sir!

Tecno p5 for sale...if interested, holla via Whatsapp 08106600865 or bbm 7c5c01bd

Qunlexus4u:
Do u have pdanet installed on ur pc and phone, u were unable to click the back up bottom because ur device was not been detected by the mtkdroid tool

I don't have pdanet,is it necessary?
....

@kolidave.. here are the steps i took:
1. Download and install busybox on ur android.. this allows ur fone's root to be visible to mtkdroid tools.
2. download and install Mtkdroid tools for ur pc.
3. download Pdanet drivers for ur pc.. Note:there are 2 types... 1 for a 32-bit system and d oda for a 64-bit system..
4. Launch and install d pdanet for ur fone from ur pc( ur fone must be connected to d pc).. follow d on screen instructions
5.. Now open Mtkdroid tools.. wait for it to detect ur fone..d yellow bar underneath d must change to green before u continue
6. Click on root,backup and recovery... den tick on To use.boot from fone.. now click on Recovery and boot..
7. The tool will load and then ask u To make CWM automatically?? click yes
8.Now u really av to wait while it creates d backup.. it takes roughly 15mins.. finally it will say Install created recovery to phone? click yes..
9. now it will prompt u to boot into CWM mode to know d success.. from der u can den create ur own backup.. I@ had abt 6 files in my clockworkmod folder after dbackup..
sent from my M3... #teamTecno ,
PS: if u are not clear quote me... i av illustrated screenshots to help

Darey_00: @kolidave.. here are the steps i took:
1. Download and install busybox on ur android.. this allows ur fone's root to be visible to mtkdroid tools.
2. download and install Mtkdroid tools for ur pc.
3. download Pdanet drivers for ur pc.. Note:there are 2 types... 1 for a 32-bit system and d oda for a 64-bit system..
4. Launch and install d pdanet for ur fone from ur pc( ur fone must be connected to d pc).. follow d on screen instructions
5.. Now open Mtkdroid tools.. wait for it to detect ur fone..d yellow bar underneath d must change to green before u continue
6. Click on root,backup and recovery... den tick on To use.boot from fone.. now click on Recovery and boot..
7. The tool will load and then ask u To make CWM automatically?? click yes
8.Now u really av to wait while it creates d backup.. it takes roughly 15mins.. finally it will say Install created recovery to phone? click yes..
9. now it will prompt u to boot into CWM mode to know d success.. from der u can den create ur own backup.. I@ had abt 6 files in my clockworkmod folder after dbackup..
sent from my M3... #teamTecno ,
PS: if u are not clear quote me... i av illustrated screenshots to help

Tanx bro. Let me try it,will get back to you on that. Tanx a bunch

kolidave: I don't have pdanet,is it necessary?
....

Yes

Bricked Tecno P5....help oooo...pls....its not even showing factory reset again

@Darey, its not showing green in the bar oooo and when I click on recovery and boot it shows me 3 empty files

kolidave: @Darey, its not showing green in the bar oooo and when I click on recovery and boot it shows me 3 empty files

install busy box and try again

NONNYG: install busy box and try again

Tanx bro. It was actually my pdanet that had issues. Tanx @darey and @nonnyg for all the help and assistant. U guys on this thread are the bestest. Me sef don turn guru for cmw recovery,Oya ask me any question concerning any troubles from your cmw

kolidave: @Darey, its not showing green in the bar oooo and when I click on recovery and boot it shows me 3 empty files

u will av to install d busy box twice on or fone.. after d normal installation open busy box.. u will c Install busy box der..

Darey_00: @kolidave.. here are the steps i took:
1. Download and install busybox on ur android.. this allows ur fone's root to be visible to mtkdroid tools.
2. download and install Mtkdroid tools for ur pc.
3. download Pdanet drivers for ur pc.. Note:there are 2 types... 1 for a 32-bit system and d oda for a 64-bit system..
4. Launch and install d pdanet for ur fone from ur pc( ur fone must be connected to d pc).. follow d on screen instructions
5.. Now open Mtkdroid tools.. wait for it to detect ur fone..d yellow bar underneath d must change to green before u continue
6. Click on root,backup and recovery... den tick on To use.boot from fone.. now click on Recovery and boot..
7. The tool will load and then ask u To make CWM automatically?? click yes
8.Now u really av to wait while it creates d backup.. it takes roughly 15mins.. finally it will say Install created recovery to phone? click yes..
9. now it will prompt u to boot into CWM mode to know d success.. from der u can den create ur own backup.. I@ had abt 6 files in my clockworkmod folder after dbackup..
sent from my M3... #teamTecno ,
PS: if u are not clear quote me... i av illustrated screenshots to help

Whr does one locate d cwm folder n Hw can I use it to fix a bricked phone. Tanks

whenever i download movies, it wont play help

Warlord3000:

no biggie..

once u have created cwm back up..

the next thing will be a nandroid backup once it ask for a reboot..

just create backup and recovery..

it takes couple of minutes without any input from u again..

NOTE;;; have at least 2gig on ur memory card.. cos the backup might take up to 1.7gb..

after the successful installation.. a clockworkmod folder will be created automatically on ur SD card folder... and 6 files inside the sub folder named backup..

that's it... u are safe..

hv done d cwm procedure. I saw d folder named backup but its empty. wat shld I do?

fesogbade:
hv done d cwm procedure. I saw d folder named backup but its empty. wat shld I do?

Boot to Cwm mode den create a backup

fesogbade:
Whr does one locate d cwm folder n Hw can I use it to fix a bricked phone. Tanks

^^^^

.

kolidave: Tanx bro. It was actually my pdanet that had issues. Tanx @darey and @nonnyg for all the help and assistant. U guys on this thread are the bestest. Me sef don turn guru for cmw recovery,Oya ask me any question concerning any troubles from your cmw

hahaha bro I dey envy you o. Me don turn Seun

Still no custom rom for this stuff?

HeWhoMusntBeNamed: whenever i download movies, it wont play help

download vlc it plays every format

NONNYG: hahaha bro I dey envy you o. Me don turn Seun

Bros I still be learner for where u dey oooo

I want for do factory reset on Tecno P5, can someone help me on how to do it plz

Darey_00:
Boot to Cwm mode den create a backup

pls, I will I precisely do dat is it still wit d mtkdroid tool?

fesogbade:
pls, I will I precisely do dat is it still wit d mtkdroid tool?

switch off your phone,press the power button with the upper volume to boot into cmw from there you'll see various option. Use ur volume key to scroll and use ur power button to select backup. You must have up to 2gb to back up

I think I need a 32gb memory card oooo!!! Chai the cmw backup and the ram expander swap file just chop my memory finish. *sobs. How much be 32gb mem card Abeg

kolidave: I think I need a 32gb memory card oooo!!! Chai the cmw backup and the ram expander swap file just chop my memory finish. *sobs. How much be 32gb mem card Abeg

Lool me sef.. na 2g dat tin chop from my mmc

So no help on how to unbrick a Tecno P5?

bykebyke: So no help on how to unbrick a Tecno P5?

. The custom ROM for your P5 is what you have to find. Look for sum1 using a p5 and has cmw backup

Pls I need a piece of advice, I want to change my memory card from 8g to 16g. Is there a specific brand of MC that is compatible with p5? Will it affect my apps if I just transfer all folders in the old one to the new one? cos I have ram expander file and cwm backup on the old one. I will appreciate ur tips

bykebyke: Bricked Tecno P5....help oooo...pls....its not even showing factory reset again

How comes?