Nero4306:
*3" angle bar* or 2" galvanic pipe which will be better for brazing scaffold of 18ft height. Urgent reply
Thanks

Geophilip:


Based on experience though, unless engineers says otherwise

Bankyshinani:

where is it located?

Nero4306:

Based on experience which will be better?

edward2018:


Yes.
Location and the design with the materials to be used will determine the cost. contact us let work with your budget.

Email::tunwardprojectconsult@gmail.com
Whatsapp:+2347031571105

Bimpsyyyyy:

it can n still remain depending on location and some other factors. you can Whatsapp me on 09069193297 for construction

Geophilip:

3" angle bar

Nero4306:
Welder giving me #220,000 (after negotiation from #250,000) for 18ft height scaffold with the following features:
4" 2mm galvanic pipe for the legs(4 legs)----
3" 5mm angle iron for tank seat at d top
3" 5mm angle iron for bracing the 4 edges together
2" 5mm angle iron for cross bracing
1.5 2mm for step
Painting and installation.
Is it a fair deal?
Thanks

GoodFaith:


4" 2mm galvanic pipe for the legs(4 legs)------why four? can u cut 2 to make four
what is the length
O boy go buy materials and sit down and watch him doing the job
Labor is about N30k to N35K

GoodFaith:


4" 2mm galvanic pipe for the legs(4 legs)------why four? can u cut 2 to make four
what is the length
O boy go buy materials and sit down and watch him doing the job
Labor is about N30k to N35K

boyestic:



thats is on the high side,did mine for 165k and its 6 legs and location is ibadan

boyestic:



thats is on the high side,did mine for 165k and its 6 legs and location is ibadan

Nero4306:


What is the height of your scaffold plz

Muyi002:
This what I have spent to this stage.

Labour Cost for Foundation Excavation, Blinding and Block setting to Lintel = 180000

Blinding
Cement - 30 bags @ 2500 = 75,000
Sharp Sand - 20 tonnes = 32,000
Granite - 25 tonnes = 105,000
Total = 212,000

Foundation Block Setting & Sock away Pit
Blocks = 1400 @ 150 = 210,000
Cement - 30 bags @ 2400 = 72,000
Sharp Sand =15 tonnes = 24,000
Labour for Soak away = 62,000
Extra Labour Expenses = 20,000
Total = 388,000

Foundation Filling
Labour = 92,000
Laterite = 326,000
Total = 418000

DPC - Half
DPM Nylon = 11,500
Granite= 10 tonnes = 45,000
Tara = 10 tonnes =13,000
Sharp sand = 10 tonnes = 15,500
Planks - 25 pieces & nails = 25000
Iron
16mm - 4 lengths @4400 = 17600
8mm - 3 lengths @ 1250 = 3750
Binding wire =2500
Transport = 2500
Workmanship
Labourer = 40000
Welder and carpenter = 13000
Cement = 28 bags @ 2500= 70000
Wire Mesh = 10500
Total = 273,000

Above Foundation Block setting + 2 soak away pits
Blocks 4100 @ 150 = 615000
Water = 3000
Sharp sand = 36000
Joining sand = 18000
Cement @2500 =162500
labour = 56000
Total = 891000

Lintel and Pillars Casting
16mm - 8 lengths @ 3630 = 29040
8mm - 31 lengths @ 1030 = 31930
12mm - 34 lengths @ 2050 = 69700
1 binding wire = 4000
Transport & logistics = 4000
Wood and planks ➕ TP = 51000
Granite = Used remains
Sharp sand = 15000
Cement = 30 bags @ 2500 = 75000
Workmanship
Labour 40000
Carpenter 22000
Iron bender 17000
Total =360000

Parapet and soak away Casting
Iron plus
12mm - 30 lengths @ 1970 = 59100
8mm - 51 lengths @ 1420 = 72420
Big Binding wire @ 7000
Extra iron = 9000
Quarter rod - 15 lengths @ 200 = 3000
Transport = 3500
Workmanship = 25000
Wood and cutting = 175000
Nail = 11100
Transport = 4000
Workmanship = 40000
Granite = 20 tonnes = 100000
Sharp sand = 15 tonnes = 21000
Cement 50 bags @ = 130000
Labour = 50000
Total = 710,000

Electrical
20mm pipe = 2 bundles @2100
25mm pipe = 1 bundle @ 3200
Electrical materials = 14000
Workmanship =9000

Plumbing
Internal plumbing
Cost of pipes and accessories = 47,000
Labour = 18,000

Muyi002:
This what I have spent to this stage.

Above Foundation Block setting + 2 soak away pits
Blocks 4100 @ 150 = 615000
Water = 3000
Sharp sand = 36000
Joining sand = 18000
Cement @2500 =162500
labour = 56000
Total = 891000

Parapet and soak away Casting
Iron plus
12mm - 30 lengths @ 1970 = 59100
8mm - 51 lengths @ 1420 = 72420
Big Binding wire @ 7000
Extra iron = 9000
Quarter rod - 15 lengths @ 200 = 3000
Transport = 3500
Workmanship = 25000
Wood and cutting = 175000
Nail = 11100
Transport = 4000
Workmanship = 40000
Granite = 20 tonnes = 100000
Sharp sand = 15 tonnes = 21000
Cement 50 bags @ = 130000
Labour = 50000
Total = 710,000
Labour = 18,000

Dominionng:


I priced 1500 litres GEEPEE tank today

Rubber. 37,000
Plastic. 32,000

Location: Mainland, Lagos

Dominionng:


I priced 1500 litres GEEPEE tank today

Rubber. 37,000
Plastic. 32,000

Location: Mainland, Lagos

idrisfuta:



Please where is this place located in ilorin ?. Secondly, I would like to ask if building a 4 bedroom bungalow is advisable near a kwara state polytechnic is advisable or not ?. Thanks.

GoodFaith:

Did you, Cast your soak away ?
GIVE ME THE BREAK DOWN OF THE --"2 soak away pits"
total information on the size of the soak away
Digging -- labor
setting the block for the soak away or Casting
plastering of the soak away
Number of iron and price
wood

The size of the soak away pit is 10ft deep and 12 x 6 in Length and breadth. I can not categorically say this is what I spent on block setting as it was done with the normal job of sitting the building blocks. As a matter of fact, it collapsed as a result of not back filling it and yet storing water in it.

Adaba0803:
Pls help how many blocks do I need to fence 1acre of land on a dry and level land. Thanks in advance

Akinolajames51:
Hello engr in the house,

Can I get a quotation for 300m2 size &100mm thickness of Germany floor.

Regards

QSFemi:
You need to provide more specific information like height of the fence and by acre what's the area of the land?

Now, answering the question bases in the following assumptions:

1 acre = 4,046 sqm (standard area)
Now, we can get the length and breadth of the land from this area, 4,046sqm

Let the land be square in shape, that means both the length and breadth are equal.

Hence Length = Breadth = 63.61metres

That means the perimeter of the land
= 4 * 63.61 = 254.44metres

Now, assuming you've 2 courses of blockwall in the foundation and 8 courses of blockwall as the height,

Hence the total height of the fence is 10 courses which is approximately 2.50m.

Therefore total area for the blockwall = 254.44 * 2.5 = 636.1 sqm

Let's assume that the length of the gate is 3.60m (main gate) and 1.20m (pedestrian gate), that means total length = 3.6 +1.2 = 4.80m

Thus, area of the gate equals 4.8 * 2.1 (height of fence above ground level) = 10.08 sqm

Net area of blockwall = 636.10 - 10.08 = 626.02sqm

Total number of blocks = 626.02 * 10 = 6260 blocks.

That's from a sound quantity surveyor.

Adaba0803:



God bless you sir.... very helpful thanks you.

KolaShangOne:


5million for 6 units self con...

And it will still remain Is it a mud house?