What does this codes mean P0974 P0141 P0161 for Honda Accord EOD V6 2004 model

Does it mean the gear need replacement or can I work on it? Gurus in the house pls I need your response sirs.

Thank you

abidemidare:
What does this codes mean P0974 P0141 P0161 for Honda Accord EOD V6 2004 model

Does it mean the gear need replacement or can I work on it? Gurus in the house pls I need your response sirs.

Thank you

State what your car problem is?

The D light is blinking on the dashboard and the speedometer doesn't move while driving, even driving for like 5minutes it would stop driving and refused to enter gear until parking it for like 1hour and start it again. That's the problem I'm facing. Thanks all

1. P0976 Shift Solenoid B Control Circuit Low

2. P0141 Heated oxygen sensor (HO2S) 2, bank 1 heater control circuit malfunction

3. P0161, Heated oxygen sensor (HO2S) 2, bank 2, heater control -circuit malfunction


For 2 and 3 above, you MAY need to change your O2 sensors.

For 1 above, you need a good mechanic to either fix or replace your tranny. I hope you are using the recommended Honda ATF? When last did you change your tranny oil?

lonelydora:
1. P0976 Shift Solenoid B Control Circuit Low

2. P0141 Heated oxygen sensor (HO2S) 2, bank 1 heater control circuit malfunction

3. P0161, Heated oxygen sensor (HO2S) 2, bank 2, heater control -circuit malfunction


For 2 and 3 above, you MAY need to change your O2 sensors.

For 1 above, you need a good mechanic to either fix or replace your tranny. I hope you are using the recommended Honda ATF? When last did you change your tranny oil?

Thanks bro, but my mechanic said I will need to change my gear box completely. After the scanning. How true it is?

abidemidare:


Thanks bro, but my mechanic said I will need to change my gear box completely. After the scanning. How true it is?

Yes he is right after several abuse. Perhaps you have not been using the right transmission fluid or you haven't changed yours in a long while. Most time gear box replacement is the way out

abidemidare:


Thanks bro, but my mechanic said I will need to change my gear box completely. After the scanning. How true it is?

That's why I said either fix or replace. But i don't know how good your mechanic is. Some mechanics just believe as long as it's a V6, you must change the gear box which is not always so.


If you are in Lagos, contact GAZZUZZ. If you are in Port Harcourt, send your contact, I will get you a good mechanic.

code means the fuse of your o2 sensor might be burnt because the wires were touching the hot exhaust or frayed.

Other code means solenoid is not working, cold be bad or clogged with dirt from not changing transmission fluid. Fixing is possible by removing the pan and solenoid try cleaning like from youtube

https://www.youtube.com/watch?v=7MK_6sCMlS0


https://www.youtube.com/watch?v=FEQNP_4R5W8

You may not really understand the first video but the second video will enlighten you and it is from a class lecture.

abidemidare:
What does this codes mean P0974 P0141 P0161 for Honda Accord EOD V6 2004 model
Does it mean the gear need replacement or can I work on it? Gurus in the house pls I need your response sirs.
Thank you

No pans on this transmission, all solenoids are within reach outside the gearbox.

That makes this easier to diagnose, he just has to find the himself a competent technician