A Building Management System (BMS) or a (more recent terminology) Building Automation System (BAS) is a computer-based control system installed in buildings that controls and monitors the building’s mechanical and electrical equipment such as ventilation, lighting, power systems, fire systems, and security systems. A BMS consists of software and hardware; the software program, usually configured in a hierarchical manner, can be proprietary, using such protocols as C-Bus, Profibus, and so on. Vendors are also producing BMSs that integrate using Internet protocols and open standards such as DeviceNet, SOAP, XML, BACnet, LonWorks and Modbus.

Characteristics
Building Management Systems are most commonly implemented in large projects with extensive mechanical, HVAC, electrical, and plumbing systems. Systems linked to a BMS typically represent 40% of a building's energy usage; if lighting is included, this number approaches to 70%. BMS systems are a critical component to managing energy demand. Improperly configured BMS systems are believed to account for 20% of building energy usage, or approximately 8% of total energy usage in the United States.[1][2]
In addition to controlling the building's internal environment, BMS systems are sometimes linked to access control (turnstiles and access doors controlling who is allowed access and egress to the building) or other security systems such as closed-circuit television (CCTV) and motion detectors. Fire alarm systems and elevators are also sometimes linked to a BMS, for monitoring. In case a fire is detected then only the fire alarm panel could shut off dampers in the ventilation system to stop smoke spreading and send all the elevators to the ground floor and park them to prevent people from using them.

• Illumination (lighting) control
• Electric power control
• Heating, Ventilation and Air-conditioning (HVAC)
• Security and observation
• Access control
• Fire alarm system
• Lifts, elevators etc.
• Plumbing
• Closed-circuit television (CCTV)
• Other engineering systems
• Control Panel
• PA system
• Alarm Monitor
• Security Automation

Benefits of BMS
• Good control of internal comfort conditions
• Possibility of individual room control
• Increased staff productivity
• Effective monitoring and targeting of energy consumption
• Improved plant reliability and life
• Effective response to HVAC-related complaints
• Save time and money during the maintenance.

Building owner
• Higher rental value
• Flexibility on change of building use
• Individual tenant billing for services facilities time saving
• Remote Monitoring of the plants (such as AHU's, Fire pumps, plumbing pumps, Electrical supply, STP, WTP, Grey water treatment Plant etc.)

Maintenance Companies
• Ease of information availability
• Computerized maintenance scheduling
• Effective use of maintenance staff
• Early detection of problems
• More satisfied occupants

Additional Benefits
• Data is consolidated onto a single system to improve reporting, information management and decision-making. Integrating and managing the HVAC, energy, security, digital video and life safety applications from a single workstation allows facility-wide insight and control for better performance.
• Increased operational savings – Efficient resource deployment can result in reduced operational costs, empowering operators, simplifying training and decreasing false alarms.
• Energy efficient – Real-time view into facility operations and deep trend analysis provide data-driven insight to optimize your energy management strategies and minimize operational costs.
• Flexibility to grow and expand – The powerful combination of open systems protocols and a scalable platform means the BMS can help support growth and expansion of the system in the future.
• Reduced risk – Strategic mobile or desktop control, exceptional alarm management and integrated security solutions helps to see the big picture, helping to speed up response time and mitigate risks for the property, people and business.
• Intelligent reporting – Comprehensive reporting with functionality for customizable reports delivers greater transparency into system history and promotes compliance.

BMS deals with Energy Demand Management. EDM integrates energy policies and regulations in to overall company operations. It incorporates energy targets into overall business strategies. EDM conduct management reviews and establishes a system to collect, analyse and report data related energy consumption and ensure correctness and integrity of that data.

Building Management Systems
Buildings are constantly affected by changing temperature, humidity and occupancy that impact performance, comfort and safety.
As a result, owners are continually challenged managing their proprietary HVAC systems seamlessly and reliably.

Therefore it becomes critically important to provide owners with open Building Management Systems that use real time data to monitor and control services such as heating, ventilation and air-conditioning, ensuring they operate at maximum levels of efficiency and economy. This is achieved by maintaining the optimum balance between conditions, energy usage and operating requirements.

Open BMS is the solution for maximum control over building management.

JMP’s BMS solutions are installed on customer premises and are fully customizable. Whether you choose a more robust DCS or PLC controlled BAS it will improve energy efficiency, comfort, security, and safety of buildings over DDC platforms.

Cost saving solutions engineered to reduce the energy to cool and the energy to reheat building air.
Optimize your Economizers to save energy. We have found that half of these systems do not operate properly costing you money.
With cooling temperature reset control you can achieve additional energy savings through lower refrigeration and re-heat costs.
Reduce costs by controlling room temperatures and air changes by managing the air handler pressure/flow control set points more effectively.
Integration expertise across numerous platforms provides flexibility in choosing the right solution to meet your requirements.

JMP’s Building Automation personnel have the knowledge and experience to plan and install Honeywell and Rockwell BMS solutions that will help to integrate the various systems of the building including that of access control, heating, cooling, and ventilation, as well as lighting, life safety systems, utility monitoring, and security systems under one common operator control. This also means increased visibility, lower maintenance costs, manpower reduction, and quicker response times.

Sustain, improve and innovate your building automation systems with certified support services.
Controllers, networks, field devices, utilities management software, remote/alarm monitoring, and system back-up require service, upgrading and support. Managing the BAS lifecycle through planning, engineering and maintenance requires commitment, knowledge and skilled resources. Whether you choose to perform these functions internally, or turn to JMP – choosing your engineering and maintenance team to support your BAS is an important pre-requisite to achieving your goals.

Building automation is the automatic centralized control of a building's heating, ventilation and air conditioning, lighting and other systems through a Building Management System or Building Automation System (BAS). The objectives of building automation are improved occupant comfort, efficient operation of building systems, and reduction in energy consumption and operating costs,and improve life cycle of utilities
Building automation is an example of a distributed control system - the computer networking of electronic devices designed to monitor and control the mechanical, security, fire and flood safety, lighting (especially emergency lighting), HVAC and humidity control and ventilation systems in a building.[1][2]

BAS core functionality keeps building climate within a specified range, provides light to rooms based on an occupancy schedule (in the absence of overt switches to the contrary), monitors performance and device failures in all systems, and provides malfunction alarms to building maintenance staff. A BAS should reduce building energy and maintenance costs compared to a non-controlled building. Most commercial, institutional, and industrial buildings built after 2000 include a BAS. Many older buildings have been retrofitted with a new BAS, typically financed through energy and insurance savings, and other savings associated with pre-emptive maintenance and fault detection.

Almost all multi-story green buildings are designed to accommodate a BAS for the energy, air and water conservation characteristics. Electrical device demand response is a typical function of a BAS, as is the more sophisticated ventilation and humidity monitoring required of "tight" insulated buildings. Most green buildings also use as many low-power DC devices as possible, typically integrated with power over Ethernet wiring, so by definition always accessible to a BAS through the Ethernet connectivity. Even a passivhaus design intended to consume no net energy whatsoever will typically require a BAS to manage heat capture, shading and venting, and scheduling device use.

You can reach us for more info and deployment

Our boys are getting creative.

We deploy services anywhere in Nigeria, contact us today for complete Automation management systems for all the Technical, Mechanical and Electrical Equipment in your building.

Because of high quality material we use in deploy our project, we are giving you 3 years warranty

Count on us

thanks for your patronage

We deploy services any where in Nigeria, try us today, a trial will surely convinced you.

Check my signature for contact

Still available, call: 0803-836-8255.

We deploy profession services for our various client,


Call us today: 08038-3682-55

We do installation nationwide

Merry chrismas & happy new year in advance to all our numerous client & customer

Count down to new year, we wish all our numerous customer/client prosperous new year ahead...,

Happy new year to our numerous client/customer from this forum

I would like to learn to install... Any way your company can train?

...

We deploy services nationwide

Automates your building

We deliver beyond your expect ion

Our deployment & services come with warranty

Monitor al electrical, mechanical, electromechanical, security equipment, etc in your building, all in one platform

We deliver beyond your expectation

Our projects come with a year warranty

We do installation nationwide with product technical warranty

We deliver beyond your expectation

Our projects come with a year warranty

Nationwide deployment services

We deploy nationwide

We do installation nationwide with product technical warranty

Warranty is guaranteed

Free technical support and available spare part with warranty

R

our service is in line with international best pratice

We deploy Nationwide.

.

Do you have a website?

Can't type it here cause of bot, call our number