Good Day everyone, the easiest business you can go into today is plastic recycling

we machines available plastic recycling,

The following are available,

Vertical Baler, Plastic Crusher, Agglomerator, Washer tank, Nylon recycling machines, and other plastic machines.

for enquiries please call

08057883203,08061163053, 09082057126

abcmachineryng@gmail.com, abcmachineryng@yahoo.com

can we have pictures for the machine?

STARTING A PLASTIC WASTE RECYCLING BUSINESS

Introduction

In Nigeria, recycling of plastic waste is one area anybody can easily venture into. The raw materials are easily found everywhere. Processing companies are looking for more suppliers to meet their needs.

Plastic waste that can be recycled includes PET bottles, Nylon bags, sachet-water nylon, PET-bottle caps, plastic containers, Nylon bags, etc.

Plastic recycling business is so vast that fortunately or unfortunately as the case may be, only few people are doing it.

Value-Chain in Plastic Recycling Business

Plastic waste collection/ Sorting / Storage – Stage 1

Baling – Stage 2

Shredding (Plastics) or Agglomeration (Nylon) – Stage 3

Pelletizing – Stage 4

From the value chain above you can enter into the business of plastic recycling in any stage depending on your financial capacity.

Plastic Waste collection/ Sorting/Storage – Stage 1

This stage is the simplest of the value chain. It is mostly dominated by our brothers from the North with high/tight trading network. However you can get your supply from other source e,g manufacturing companies waste, schools, hotels, supermarkets, etc.

Supplier/Collection/Sorting – scale – storage – sell

Equipment Needed: (1) Weighing Scale (2) Packing Bags (Optional)

Baling – stage 2

One thing about plastic recycling business is that the more you move down the value chain, the more money you make. You will make more money if you bale/sell than selling directly. Plastic recycling companies pay higher per kilo for baled products.

Baling is very important especially when transportation/distance are considered. It is better to compact (bale) plastic waste for easy handling and size reduction to save cost during transportation.

Note: Before Baling, plastic waste should be cleaned and sorted.

Supplier – Scale – Bale – Stack – Sell

Equipment Needed: (1) Scale (2) Baling Machine

Shredding or Agglomeration – stage 3

If you want to go into plastic recycling business through this stage, you need a plastic shredding machine (Machine for cutting of plastics into pieces [flakes]) or an Agglomerator (Machine for grinding Nylon into powdery form [Agglomerates])

Having these machines you can operate in two or either ways

Buy from suppliers, Shred or agglomerate and sell to plastic recycling companies or
Operate as a milling station whereby people come to your place to shred or agglomerate and pay you for your service.
Supplier – Scale – Shred or Agglomerate – Store – Sell

Equipment Needed: (1) Scale (2) Shredding Machine or Agglomerator

Pelletizing – stage 4

Pelletizing machines converts plastic flakes or Agglomerates to granules before they are been sold to plastic manufacturing companies that uses extrusion, Injection or blow mould to form them into various plastic shapes. If you want to go into the business at this stage, you need a pelletizing machine

Supplier – scale – Pelletize – Store – sell

Equipment Needed: (1) Scale (2) Pelletizing Machine


for sales, supply and Installation of these recycling equipment

call/whasapp 0806-116-3053 or 08057883203 ( call only )

or visit www.abcmachinery.com.ng

High Density Plastic Crushing machine.

Uses: for crushing High density plastics such as crates, buckets, chairs, plates, cups, containers, etc
Capacity: [/b]160kg/Hr
[b]Machine Dimension: 6ft (1800mm) Length ; 6ft (1800mm) Height ; 5ft (1500mm) width.
Hopper Dimension: 24” (610mm) Length; 32” (812mm) Height; 28” ( 711mm) width
Weight: 750kg
Power Intake: 3-phase/60hp electric motor
Location: Lagos, Nigeria.


contact AB&C Machinery at 0806-116-3053 or 0805-788-3203

www.abcmachinery.com.ng

WASTE POLYTHENE (NYLON) RECYCING BUSINESS

Waste polythene (Nylon) can be used again as raw materials for production of other plastic products.
Examples of waste Nylon are pure-water sachets, Bread wrapper, Laundry bags, shopping bags, container cover, Agric Nursey bags, Rolls from manufacturing companies, etc.

Stage in The Business
1. Suppliers
2. Recycling Machines operators
3. Industrial Users

Suppliers
You can start this business as a supplier. All you need is the ability to differentiate each nylon according to their type. However, the processing companies will give you the type/specifications they want.
Equipment Needed
1. scale
2. Waste Nylon Washing Tank
3. Baling Machine (optional)

Agglomerator (Nylon Grinder) operator
You can come into this business as Agglomerator (nylon grinding machine) operator. You don’t need big space for it. At least a ¼ plot of land is enough to start.
As an operator, you can buy, grind and sell to industrial users or You can operate as a grinding mill where other people come and grind in your place as you charge them per kilo.
Equipment Needed
1. Scale
2. Agglomerator (Nylon grinding machine)


Industrial users
These are individuals or companies that process the agglomerates (grinded Nylon) to semi-finished or finished products. As an individual you can buy pelletizing machine and start producing pellets from the agglomerates and then sell to plastic manufacturing companies.


For Enquires on various plastic recycling machines.
Contact AB&C Machinery on 0806-116-3053 (WhatsApp/Call), 0805-788-3203 (call only)

www.abcmachinery.com.ng

Crushed plastics are available in huge quantities and in various colors.

1. Hot Washed and Sterilized N850 per kg

2. Hot Washed N750 per kg

3. Cold Washed N500 per kg

4. Unwashed - N400 per kg

HOTLINE/WhatsApp: 07047247562

Minimum order quantity is 500kg

Prices are subject to change without prior notice.