INTRODUCTION The exert nature of electricity is not known but investigation indicate that it consist of small negative charge called Electron, when this electron are standing still we have static electricity” and when they are forced to travelled a movement of electron they are called “Dynamic electricity. Power generation and distribution has been an indispensable factor in the progress of an economy, ranging from manufacturing, banking, media, health care, avaiation, etc.( Ulaby, 1999). It has however been proved that power skyrocket the productivity of a country. Since power has been defined by (Knight, 2004) as the rate of doing work; this simply means that the productivity of a country will largely depend on the availability of power from different source. Thus, ( Hassen 1989) cited in ( Ulaby, 1999) states that majority of the problems of Nigeria is traceable to the erratic power supply nature of the country, where many activities has been paralyzed due to the power outage. Analysis has clearly showed that Nigeria looses up to about N220 Billion annually, due to the unstable nature of the country power supply which has poses a threat, hence reducing the capacity of industries to increase productivity and Environmental pollution which leads to degradation or depletion of ozone layer is one of the major problems caused by the use of generator with fossil fuels (Ajav, 2012). Other problem includes land and water pollution, noise pollution, increase in price of fossil fuel year in year out, among others. The famous Faraday energy generator can be modified for perpetual electrical current maintenance (Adiyat et.al, 1993). The basic components the fuel less engines consisted of are a set of fast spinning discs (DC motor and alternative) placed between two electromagnets. But this scheme could never maintain current indefinitely, because the disc electrical charge is weak to withstand the opposing resistance of the conductor. Practically, the effective working fuel-less generator have to be built by each material that have one thousand times the electrical conductivity of copper could generate and maintain self-sustained current. It is suggested that increasing disc rotation to incomprehensible velocity or huge component geometrical enlargements would have the same effect too (Taufik, 2005). It is necessary to spin discs with the super-rapidity required to generate self-sustaining electrical current. The fuel-less engine usually runs very smooth and quiet and the best part of the design is that it is free from air pollution, since there is no emission of dangerous gas like Carbon monoxide (CO), carbon-dioxide (CO2), etc. The speed are adjustable or can be built to run at one speed with engine which does not run on any type of gasoline, oil or other combustible fuel. The free electrical energy produced by the fuel-less generators is replaced back into the motor and reused by the motor (Maini, 1998). Heavy electrical machinery that starts automatically or remotely generally makes use of contactors which rely on an electromagnetic force to close them to start the machinery. This force is created by an electric coil placed in the centre of a laminated steel core. These coils are typically designed to operate at fairly low voltages, ranging from 110 volts to as low as 12 volts. As these machines themselves typically run on far higher voltages, this creates the need for a separate control voltage feed. Instead of having to run separate cables or install extra sets of bus bars, it is far simpler to use the main circuit voltage and step it down with a control transformer to the appropriate control voltage (Wisegeek, 2013). Greenhouse Effect With the increase in world population and the rise of living standards, the demand for energy in the world is steadily increasing. Global environmental issues and exhaustion of fossil resources also pose serious problems for energy consumption (Houghton, 1989). Environmental friendly energy technology and a shift to non fossil energy resources such as natural energy and biomass are expected. Generally, from the past efforts of so many researchers it can be deduced that search for Renewable energy is important in terms of sustainable energy throughout the world. Hence operating principle of electromagnetic generator such as fuel-less power generating set Design, construction and evaluation is of most important. The objective of the study is to design, construct and evaluate the performance of 1.5KVA Power fuel less generating set. INTRODUCTION The exert nature of electricity is not known but investigation indicate that it consist of small negative charge called Electron, when this electron are standing still we have static electricity” and when they are forced to travelled a movement of electron they are called “Dynamic electricity. Power generation and distribution has been an indispensable factor in the progress of an economy, ranging from manufacturing, banking, media, health care, avaiation, etc.( Ulaby, 1999). It has however been proved that power skyrocket the productivity of a country. Since power has been defined by (Knight, 2004) as the rate of doing work; this simply means that the productivity of a country will largely depend on the availability of power from different source. Thus, ( Hassen 1989) cited in ( Ulaby, 1999) states that majority of the problems of Nigeria is traceable to the erratic power supply nature of the country, where many activities has been paralyzed due to the power outage. Analysis has clearly showed that Nigeria looses up to about N220 Billion annually, due to the unstable nature of the country power supply which has poses a threat, hence reducing the capacity of industries to increase productivity and Environmental pollution which leads to degradation or depletion of ozone layer is one of the major problems caused by the use of generator with fossil fuels (Ajav, 2012). Other problem includes land and water pollution, noise pollution, increase in price of fossil fuel year in year out, among others. The famous Faraday energy generator can be modified for perpetual electrical current maintenance (Adiyat et.al, 1993). The basic components the fuel less engines consisted of are a set of fast spinning discs (DC motor and alternative) placed between two electromagnets. But this scheme could never maintain current indefinitely, because the disc electrical charge is weak to withstand the opposing resistance of the conductor. Practically, the effective working fuel-less generator have to be built by each material that have one thousand times the electrical conductivity of copper could generate and maintain self-sustained current. It is suggested that increasing disc rotation to incomprehensible velocity or huge component geometrical enlargements would have the same effect too (Taufik, 2005). It is necessary to spin discs with the super-rapidity required to generate self-sustaining electrical current. The fuel-less engine usually runs very smooth and quiet and the best part of the design is that it is free from air pollution, since there is no emission of dangerous gas like Carbon monoxide (CO), carbon-dioxide (CO2), etc. The speed are adjustable or can be built to run at one speed with engine which does not run on any type of gasoline, oil or other combustible fuel. The free electrical energy produced by the fuel-less generators is replaced back into the motor and reused by the motor (Maini, 1998). Heavy electrical machinery that starts automatically or remotely generally makes use of contactors which rely on an electromagnetic force to close them to start the machinery. This force is created by an electric coil placed in the centre of a laminated steel core. These coils are typically designed to operate at fairly low voltages, ranging from 110 volts to as low as 12 volts. As these machines themselves typically run on far higher voltages, this creates the need for a separate control voltage feed. Instead of having to run separate cables or install extra sets of bus bars, it is far simpler to use the main circuit voltage and step it down with a control transformer to the appropriate control voltage (Wisegeek, 2013). Greenhouse Effect With the increase in world population and the rise of living standards, the demand for energy in the world is steadily increasing. Global environmental issues and exhaustion of fossil resources also pose serious problems for energy consumption (Houghton, 1989). Environmental friendly energy technology and a shift to non fossil energy resources such as natural energy and biomass are expected. Generally, from the past efforts of so many researchers it can be deduced that search for Renewable energy is important in terms of sustainable energy throughout the world. Hence operating principle of electromagnetic generator such as fuel-less power generating set Design, construction and evaluation is of most important. The objective of the study is to design, construct and evaluate the performance of 1.5KVA Power fuel less generating set.