How to use the [url]charcoal machine production line[/url]http://www.charcoal-machines.com/charcoal-briquette-production-line, and what factors are involved in the process of using the charcoal machine production line? Then the charcoal machine production line is also turning waste into treasure and realizing recycling and recycling in the process of producing charcoal. This is also a very profitable project.

The charcoal machine production line fills the raw materials containing biomass fibers that can produce charcoal, such as branches, straw, straw, peanut shells, trunks, cotton straw, tea seed husks, husks, weeds, leaves, etc., and is pulverized into 10 mm by a pulverizer. The powder inside is dried by a dryer to make the moisture content within 12%. After being put into the rod machine through high temperature and high pressure, it is formed (without any additives) and then put into a carbonization furnace for carbonization. charcoal. It is also possible to carbonize the material powder directly into a carbon powder using a continuous carbonization furnace at a high temperature.

The production activity of the charcoal machine production line is inseparable from the high temperature. When the mechanism carbon is molded, it needs to be extruded under the environment of high temperature and high pressure. It is completed by the heating coil of the charcoal machine production line, and is heated by the heating ring. 260-350 degrees Celsius, in order to ensure that the mechanism of carbon rods produced to achieve the required density, the point to pay attention to is to preheat the charcoal machine production line after the mechanism carbon molding and then discharge the material for production and processing. The mechanism of charcoal produced depends on the equipment and process, and depends on the size of the water contained in the raw materials. Generally, the moisture content of the raw material is less than 12%, but it is also greater than 6%, so as to greatly avoid the resulting salary bar being easily broken due to excessive moisture content.

These are just some of the details in the process of making rods in the charcoal machine production line, and they are also a key part. The good and bad of the rods also affect the effect of carbonization in the future. Therefore, in every production process, we must judge according to the production experience. Adjust so that you can get a better product.

The above are the factors that need attention in the process of producing charcoal in the charcoal machine production line, which can affect the quality of the mechanism charcoal and the production efficiency of the charcoal machine production line, and indirectly affect the user's economic benefits.

website:http://www.charcoal-machines.com/charcoal-briquette-production-line