(1) When the chaff cutter is in operation, the safety protection equipment must be complete.
(2) The operator should fully understand the performance of the machine. It is strictly forbidden to start work after drinking, sickness or excessive fatigue. When working, people and things should not be close to the running part.
(3) Adolescents under the age of 16 and those who do not have the rules for the use of the machine are not allowed to work alone.
(4) The working place of the chaff cutter should be spacious and equipped with fireproof equipment.
(5) When feeding grass, the operator should stand on the side of the feeding hopper, and it is forbidden to reach into the shield of the feeding hopper with both hands. At the same time, it is necessary to strictly prevent wooden sticks, metal objects, masonry, etc. from entering the machine, so as to avoid injury to the machine.
(6) It is forbidden to reverse the cutter head.
(7) The mower must work at the specified speed, and it is forbidden to overspeed and overload work.
( When replacing the fasteners of the chaff cutter and fixed blades, 8.8 bolts and 8 nuts must be used. It should not be replaced by low-grade bolts and nuts.
(9) If abnormal noise is found during work, stop the inspection immediately. Power must be cut off before inspection to prevent troubles when the machine is running.
(10) The amount of material to be fed should be appropriate, and too much may cause the overload to stop. Of course, it should not be too small, too little will affect the efficiency of cutting.
(11) Before stopping work, first set the displacement handle to 0 position, let the machine idle for about 2 minutes, and then stop the dust and weeds in the machine.

https://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/
Email:jerryzhangshuliy@gmail.com