The Jp2 charge controller is one of the largest MPPT charge controller available today. The controller’s algorithm will charge the batteries operating at the maximum power point of the solar array. With 99% conversion efficiency the Jp2 controller allows for increased battery charging capacity regulating the charging output to 100 Amperes.

The same controller can be used with 12V, 24V, 48V or 96v. The controller will automatically detect the systems nominal voltage and adjust its charging algorithms accordingly and producing up to 100A regardless of the battery voltage.

A single Jp2 controller can handle large PV arrays of more then 6000 Watts. If a larger PV array is used the controller will limit the output current to 100Amps for maximum power efficiency.

The controller includes an external temperature sensor to compensate for drastic temperature changes. It also includes indication for PV ground fault detection and interruption (GFDI) and integrated arc fault circuit interrupter (AFCI) to meet the requirements of the NEC.

Jp2 features multiple LED indicators in the front panel of the controller as well as large digital LED display for easy reading of the system’s performance
Maximum PV input voltage: 200VDC
Maximum array short circuit current: 100 Amp DC
Nominal voltage: 12V, 24V, 48V
Output voltage range: 10-66 VDC
Maximum output power: 6600 Watts
Peak efficiency: 99%
Night time consumption: 2 Watts
Regulation method: MPPT, bulk, absorption, float
https://jp2solarpower.com
Or visit my signature