The[url] carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html is equipped with an advanced filter to quickly decompose the moisture and tar from the smoke to achieve a smoke-free and environmentally friendly effect. The working principle of the [url]carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html is to use the self-produced gas furnace as the heat source, and the methane gas is used to pass through the cyclone, and the air is introduced into the burner. The outlet temperature of the burner can reach 800 ° C to 1200 ° C, and the flow rate can reach 3 to 5 meters per second. The generated high-temperature airflow is heated in the periphery of the combustion chamber. It should be noted that when heating, the furnace temperature is between 100 ° C and 150 ° C, which is the maximum moisture in the furnace. When the raw material rod is put into the kiln, 4 to 8% of water is brought into the furnace. 1700kg of raw materials can bring more than 100 kilograms of water. These waters are the enemy of carbonization. Because the mechanism carbon rods are most afraid of moisture, the water is pulverized into powder, which seriously affects the quality of carbonization. Therefore, the moisture removal system is essential. The key is that the tidal time is 1 to 1.5 hours. When the temperature in the carbonization chamber rises to 300 °C, a large amount of flammable gas is generated in the furnace. Each kilogram of raw material theoretically produces three cubic methane gas, which can be carbonized. Heating, drying heat source, the temperature of the furnace can be adjusted at will, low temperature carbon is generally above 400 ° C, 8 hours can be completed; high temperature carbon is more than 600 ° C, 10 hours to complete.