*BUSINESS PLAN FOR EQUIPMENT LEASING: BULLDOZER CAT D6H LGP. Cost: N15,000,000. Daily Lease Rate: N80,000; COMPACTOR DYNAPAC 15 METRIC TONNES. Cost: N10,000,000. Daily Lease Rate: N70,000; EXCAVATOR CAT 320BL Cost: N15,000,000. Daily Lease Rate: N80,000; GRADER CAT 14G. Cost: N10,000,000. Daily Lease Rate: N70,000; MACK LOWBED 90 METRIC TONNES Trailer. Costs: N10,000,000. Daily Lease Rate: N80,000; WHEEL LOADER CAT 966C. Cost of Purchase: N10,000,000. Daily Lease Rate: N70,000*

The Nigerian geographical region is currently going through a period of development and expansion due to the increase in population and this has necessitated previously abandoned hinterlands and rural areas to be cleared for Commercial, Human and Industrial Habitation. Fact is evident in the rapid development been seen in areas such as Lagos - Epe expressway, Lagos - Badagry Expressway, Lekki Free Trade Zone etc.

In order to clear the Land for Buildings and Infrastructure Construction. The usefulness of the Equipments such as: Bulldozer, Compactor, Excavator, Grader, Lowbed Trailer and Wheel Loader cannot be over emphasized.

All the Equipments are used mainly in Civil and Infrastructure engineering Works. The main function of the Excavator is to dig and move earth. Beside being used in construction sites, excavators are also commonly used in mining activities. It is comprised of a boom stick, which is a joined arm, a cab, which is fixed atop of the undercarriage equipped with tracks.

Different Bulldozers, Compactors, Excavators, Graders, Lowbed Trailers and Wheel Loaders are available in the market in different sizes. Excavators for example the smallest excavator is known as mini excavator. Mini excavator weighing near about 1470 kg or 3240 lb. The size of the bucket in this type of excavator is 0.036 cubic meter at most and the broadness of the track can accordingly be adjusted to 35 inches or 89 cm. From this mini size, the same company can also produce the largest excavator, which can weigh around 187,360lb or 84,980 kg. The size of the bucket is almost 4.5 cubic meters.

A modern excavator is a very verstile machine. As it has a powered hydraulic system, this can be adapted for many uses. Just by changing the attachment, instead of the bucket, the excavator function is changed. If it is to be used as a demolition excavator, a hydraulic power breaker or grapple is used.

An auger can be also attached and the excavator becomes a drilling machine. This is especially usefull where shallow excavation of a few meters are required. Example for foundation works or installation of poles.

A series of pictures below shows the different types of attachment and uses.

Here you can see an excavator is attached with an auger. The auger is hydraulic powered.

And when attached with a vibratory pile hammer, an excavator can be used to install sheetpiles.

Used in scrap yards, excavators are attached with electromagnets to sort out metals

In quarries or where breaking hard rocks are required, here an excavator is attached with a hydraulic rock breaker. The breaker is equally usefull for breaking concrete as in demolition works.

Broken rocks than can be removed using a rock grabber as shown here. A grabber is a versatile attachment with different designs. Beside rocks, it can be used to grab just about anything.

The above are just some of the different tools that can be attached to a modern hydraulic excavator. Take note that the types of attchment availble are not limited to the above only as there is a wide selection of attachment. Some can be custom built for a particular project or condition. But what is important in this article is that a modern hydraulic excavtor is a very usefull piece of equipment.

COST AND MAINTENANCE.

It is quite expensive purchasing a brand new Equipment as its price ranges between 150,000- 200,000 US Dollars excluding import duties and other tariffs. Used once are made available for sale by major manufacturers such as CATERPILLAR, KOMATSU, VOLVO etc. We hereby recommend from our experience about CAT D6H LGP, CAT 320L CAT 320BL, CAT 12G, CAT 14H, CAT 966C and MACK CH Truck due to their durability, reliability and affordability. The cost of purchasing and importing these equipments from CAT through the services of an accredited agent in Germany into the country arrives at an estimated amount of 200 million Naira only excluding cost of clearing at the Nigerian seaport, but we can source for Nigerian Used Equipments, after careful consideration.

Due to the durability of this equipments, the cost of its operations doesn’t go beyond Fuel and Maintenance which is quite reasonable. Also due to its year of manufacture, its parts are readily available in the Nigerian market and our technical expertise also knows how to manage it during period of breakdown and maintenance requirement.

BUSINESS PROSPECTS.

From the above stated description of the equipment, that its functions and usefulness are immeasurable. It has a ready and steady market amongst Construction Companies, Property Managers, individuals and other companies. These equipments has been proven to make an average of N300,000 daily as cost of hiring which doesn’t include cost of Fuel and other incidental expenditures. Also from current experience in Lekki Free Trade Zone Ibeju-Lekki, Lagos. There are high demand for its services. This claim can be verified in the on-going construction projects that are taken place within Lekki Free Trade Zone like Dangote Refinery Projects in Idaso, Lekki Deep Seaport and other Clients.

PROPOSAL

CRESTRADE Limited hereby propose to go into partnership with investor on the following conditions and terms:

1. That the investor provides a capital of 70 Million Naira only for the purchase of the said equipments for operations purpose.

2. That the cost of maintenance and repairs as the need arises will be the responsibility of CRESTRADE Limited.

3. That the equipment would be purchased and duly registered and insured in the name of the Financial Investor.

4. That a Payments Plan for the remittance of the invested funds including agreed percentage interest on capital be reached within a stipulated time frame. We hereby propose a 24 Months Payments Plan which includes interest on capital.

5. That the remittances will be made every 90 days and within the stipulated time frame.

6. That upon full payment of the agreed amount of the remittances, the ownership of the said equipment would be transferred to CRESTRADE Limited.

7. That failure to abide with the stated and other agreed plan would lead to the termination of contract and the equipments repossessed.

Adeleke Olakunle Majekodunmi is the Executive Chairman of CRESTRADE Limited with wide experience in building construction, civil engineering and Waterfront Infrastructure development works and working on the constructions of roads which include: Bariga Road, Somolu, Eko Atlantic City Projects and rehabilitation of Idiroko - Mile 12 service lanes in Lagos state. We have worked on construction of roads in Lagos and Ogun States. These roads include; Ago-Iwoye to Ijebu-Igbo to Ijebu-Ode roads, Ipaja road, Alimoso, Noforija-Epe road etc. Presently, We one of the Contractors that working with other companies at Dangote Refinery Jetty and Lekki Deep Seaport, Lekki Free Trade Zone situated at Ibeju-Lekki, Lagos State and We manage the business activities of CRESTRADE Limited. We have spent a whole lot of time working with various construction equipments and We have wide knowledge of managing and maintaining them.

CRESTRADE Limited have a wide range of connectivity with construction companies both on the mainland and the highland in Lagos State and other neighboring State in the area of Equipment leasing and hiring. This network of business transactions would aid the marketing ability of any equipment in our possession for hiring purposes. I also have the technical know-how of most construction works for the machines and with the ability to recommend the appropriate equipment for a given task. Due to the formal knowledge I possess combined with my acquired working experience I can assure of the technical and managerial skill required for the smooth running of this business proposal.

SECURITY ON INVESTMENT.

The current market value of the Nigerian used CAT D6H LGP and CAT 320L to CAT 325BL Excavator ranges between N15m to N18m and CAT 966C and CATS 12G and 12H ranges between N10m to N15m in the open market, this can also be verified at the appropriate markets. This fact guarantees that the capital invested by the investor is secured as he or she owns the Equipment until the agreed remittance is made within the stipulated time frame and can be terminated immediately and thereafter SELL the EQUIPMENTS due to contractual default.

CONCLUSION

The proposed business plan is an avenue in the Nigerian economy which has not be fully discovered and exploited thereby making room for large profits by investor and participants in this sector of the economy. The odds and chances of failure are minimal and there is an assurance of reasonable returns on investment.

For further details please send emails to crestrader@gmail.com, or Call or WattsApp: 07066559979 or 08098026919.

This is the summary of what we do:

1. Block Fund (BF) facility which is mostly used by petroleum products business clients as well as importers and exporters

2. ProcessIng of Guarantee (BG) which is needed to secure big loan facility.

3. Long term Capital Project financing for business in any sector of the economy.(from 1m dollar and above)

4. Medium term project and working capital financing (from N100m naira to N250m naira)

5. Short term financing for LPOs, Supplies and procurement etc. (From N30m to N100m naira)

6. Short term loans (from N1m to N30m naira)

7. Preparation of financial statements and document that will be needed for any of the finance facility.

8. Financial consulting and statutory audit.

9. Recovery of funds and excess bank charges.

https:///2348087016202

crestrader:
*BUSINESS PLAN FOR EQUIPMENT LEASING: BULLDOZER CAT D6H LGP. Cost: N15,000,000. Daily Lease Rate: N80,000; COMPACTOR DYNAPAC 15 METRIC TONNES. Cost: N10,000,000. Daily Lease Rate: N70,000; EXCAVATOR CAT 320BL Cost: N15,000,000. Daily Lease Rate: N80,000; GRADER CAT 14G. Cost: N10,000,000. Daily Lease Rate: N70,000; MACK LOWBED 90 METRIC TONNES Trailer. Costs: N10,000,000. Daily Lease Rate: N80,000; WHEEL LOADER CAT 966C. Cost of Purchase: N10,000,000. Daily Lease Rate: N70,000*

The Nigerian geographical region is currently going through a period of development and expansion due to the increase in population and this has necessitated previously abandoned hinterlands and rural areas to be cleared for Commercial, Human and Industrial Habitation. Fact is evident in the rapid development been seen in areas such as Lagos - Epe expressway, Lagos - Badagry Expressway, Lekki Free Trade Zone etc.

In order to clear the Land for Buildings and Infrastructure Construction. The usefulness of the Equipments such as: Bulldozer, Compactor, Excavator, Grader, Lowbed Trailer and Wheel Loader cannot be over emphasized.

All the Equipments are used mainly in Civil and Infrastructure engineering Works. The main function of the Excavator is to dig and move earth. Beside being used in construction sites, excavators are also commonly used in mining activities. It is comprised of a boom stick, which is a joined arm, a cab, which is fixed atop of the undercarriage equipped with tracks.

Different Bulldozers, Compactors, Excavators, Graders, Lowbed Trailers and Wheel Loaders are available in the market in different sizes. Excavators for example the smallest excavator is known as mini excavator. Mini excavator weighing near about 1470 kg or 3240 lb. The size of the bucket in this type of excavator is 0.036 cubic meter at most and the broadness of the track can accordingly be adjusted to 35 inches or 89 cm. From this mini size, the same company can also produce the largest excavator, which can weigh around 187,360lb or 84,980 kg. The size of the bucket is almost 4.5 cubic meters.

A modern excavator is a very verstile machine. As it has a powered hydraulic system, this can be adapted for many uses. Just by changing the attachment, instead of the bucket, the excavator function is changed. If it is to be used as a demolition excavator, a hydraulic power breaker or grapple is used.

An auger can be also attached and the excavator becomes a drilling machine. This is especially usefull where shallow excavation of a few meters are required. Example for foundation works or installation of poles.

A series of pictures below shows the different types of attachment and uses.

Here you can see an excavator is attached with an auger. The auger is hydraulic powered.

And when attached with a vibratory pile hammer, an excavator can be used to install sheetpiles.

Used in scrap yards, excavators are attached with electromagnets to sort out metals

In quarries or where breaking hard rocks are required, here an excavator is attached with a hydraulic rock breaker. The breaker is equally usefull for breaking concrete as in demolition works.

Broken rocks than can be removed using a rock grabber as shown here. A grabber is a versatile attachment with different designs. Beside rocks, it can be used to grab just about anything.

The above are just some of the different tools that can be attached to a modern hydraulic excavator. Take note that the types of attchment availble are not limited to the above only as there is a wide selection of attachment. Some can be custom built for a particular project or condition. But what is important in this article is that a modern hydraulic excavtor is a very usefull piece of equipment.

COST AND MAINTENANCE.

It is quite expensive purchasing a brand new Equipment as its price ranges between 150,000- 200,000 US Dollars excluding import duties and other tariffs. Used once are made available for sale by major manufacturers such as CATERPILLAR, KOMATSU, VOLVO etc. We hereby recommend from our experience about CAT D6H LGP, CAT 320L CAT 320BL, CAT 12G, CAT 14H, CAT 966C and MACK CH Truck due to their durability, reliability and affordability. The cost of purchasing and importing these equipments from CAT through the services of an accredited agent in Germany into the country arrives at an estimated amount of 200 million Naira only excluding cost of clearing at the Nigerian seaport, but we can source for Nigerian Used Equipments, after careful consideration.

Due to the durability of this equipments, the cost of its operations doesn’t go beyond Fuel and Maintenance which is quite reasonable. Also due to its year of manufacture, its parts are readily available in the Nigerian market and our technical expertise also knows how to manage it during period of breakdown and maintenance requirement.

BUSINESS PROSPECTS.

From the above stated description of the equipment, that its functions and usefulness are immeasurable. It has a ready and steady market amongst Construction Companies, Property Managers, individuals and other companies. These equipments has been proven to make an average of N300,000 daily as cost of hiring which doesn’t include cost of Fuel and other incidental expenditures. Also from current experience in Lekki Free Trade Zone Ibeju-Lekki, Lagos. There are high demand for its services. This claim can be verified in the on-going construction projects that are taken place within Lekki Free Trade Zone like Dangote Refinery Projects in Idaso, Lekki Deep Seaport and other Clients.

PROPOSAL

CRESTRADE Limited hereby propose to go into partnership with investor on the following conditions and terms:

1. That the investor provides a capital of 70 Million Naira only for the purchase of the said equipments for operations purpose.

2. That the cost of maintenance and repairs as the need arises will be the responsibility of CRESTRADE Limited.

3. That the equipment would be purchased and duly registered and insured in the name of the Financial Investor.

4. That a Payments Plan for the remittance of the invested funds including agreed percentage interest on capital be reached within a stipulated time frame. We hereby propose a 24 Months Payments Plan which includes interest on capital.

5. That the remittances will be made every 90 days and within the stipulated time frame.

6. That upon full payment of the agreed amount of the remittances, the ownership of the said equipment would be transferred to CRESTRADE Limited.

7. That failure to abide with the stated and other agreed plan would lead to the termination of contract and the equipments repossessed.

Adeleke Olakunle Majekodunmi is the Executive Chairman of CRESTRADE Limited with wide experience in building construction, civil engineering and Waterfront Infrastructure development works and working on the constructions of roads which include: Bariga Road, Somolu, Eko Atlantic City Projects and rehabilitation of Idiroko - Mile 12 service lanes in Lagos state. We have worked on construction of roads in Lagos and Ogun States. These roads include; Ago-Iwoye to Ijebu-Igbo to Ijebu-Ode roads, Ipaja road, Alimoso, Noforija-Epe road etc. Presently, We one of the Contractors that working with other companies at Dangote Refinery Jetty and Lekki Deep Seaport, Lekki Free Trade Zone situated at Ibeju-Lekki, Lagos State and We manage the business activities of CRESTRADE Limited. We have spent a whole lot of time working with various construction equipments and We have wide knowledge of managing and maintaining them.

CRESTRADE Limited have a wide range of connectivity with construction companies both on the mainland and the highland in Lagos State and other neighboring State in the area of Equipment leasing and hiring. This network of business transactions would aid the marketing ability of any equipment in our possession for hiring purposes. I also have the technical know-how of most construction works for the machines and with the ability to recommend the appropriate equipment for a given task. Due to the formal knowledge I possess combined with my acquired working experience I can assure of the technical and managerial skill required for the smooth running of this business proposal.

SECURITY ON INVESTMENT.

The current market value of the Nigerian used CAT D6H LGP and CAT 320L to CAT 325BL Excavator ranges between N15m to N18m and CAT 966C and CATS 12G and 12H ranges between N10m to N15m in the open market, this can also be verified at the appropriate markets. This fact guarantees that the capital invested by the investor is secured as he or she owns the Equipment until the agreed remittance is made within the stipulated time frame and can be terminated immediately and thereafter SELL the EQUIPMENTS due to contractual default.

CONCLUSION

The proposed business plan is an avenue in the Nigerian economy which has not be fully discovered and exploited thereby making room for large profits by investor and participants in this sector of the economy. The odds and chances of failure are minimal and there is an assurance of reasonable returns on investment.

For further details please send emails to crestrader@gmail.com, or Call or WattsApp: 07066559979 or 08098026919.

This is the summary of what we do:

1. Block Fund (BF) facility which is mostly used by petroleum products business clients as well as importers and exporters

2. ProcessIng of Guarantee (BG) which is needed to secure big loan facility.

3. Long term Capital Project financing for business in any sector of the economy.(from 1m dollar and above)

4. Medium term project and working capital financing (from N100m naira to N250m naira)

5. Short term financing for LPOs, Supplies and procurement etc. (From N30m to N100m naira)

6. Short term loans (from N1m to N30m naira)

7. Preparation of financial statements and document that will be needed for any of the finance facility.

8. Financial consulting and statutory audit.

9. Recovery of funds and excess bank charges.

https:///2348087016202