Image result for bad bushing symptoms
A suspension bush is a rubber part that is fitted between most suspension parts. They ensure that there is no metal-to-metal contact between the parts it holds. It, moreover, controls the amount of movement between parts. Suspension bushes, sometimes called wishbone bushes, are small parts that are key to the safety of your car, steering, and handling.

The suspension bushes, therefore, have a very important role to play in making sure that your car drives smoothly. They will help dampen the impact of uneven road surfaces on the suspension. On top of that, they will filter out any vibrations or road noise in the process. The bushes also help keep your car stable when you change direction or accelerate or brake.

Suspension bushes are located anywhere on the suspension where one suspension part joins another part. Parts like a suspension control arm, wishbone or trailing arm all have one or more bushes. A specific type of bush called the ball joint can be found in the steering system.

Symptoms of a Bad Arm Bushing

Reduced Responsiveness in Steering

Steering problems are among the indicators of not correctly working control arm bushing. The steering can lose some responsiveness.

At high speeds, the vehicle can even “wander” or turn primitively. While driving, you will feel



. The vehicle can lean to a certain degree on sharp turns.

Wobbling Wheels

A bad arms control bushing affects smooth driving. One of the reasons why it was made is to absorb some shock thus facilitating a smooth ride.

The bad one will not achieve this goal but instead will cause some annoyance and disturb your comfort while driving.

You will not be comfortable when turning or reversing and you hear a bad sound. Yes, you will wonder if you are damaging something and you will not be comfortable.

The Braking System

At the moment you see that your brakes are now sharper than it used to be, the first thing to do is to attribute the scenario to the bad control arm bushing.

When the forward and backward vibration of the control arm is not present during the application of brakes, the vehicle will brake suddenly.

Backward Movement When Accelerating

If there is a backward movement in the rear end of the vehicle on acceleration, consider checking the control arm bushing. When accelerating or turning slowly, the steering begins to shake, and a tug is observed.

Tire Wearing

If your vehicle is suffering from bad control arm bushing, the effect is uncompromising. Definitely the wheel will also suffer from wheel miss-alignment, and this causes uneven wear and tire wears either inside or outside even both sides.

How to Replace Arm Bushing

The steps involved in bushing replacement are relatively easy to master and can usually be completed under an hour once you complete equipment. However, the first time you repair the bushings on your car, the steps can take several hours to complete. Therefore, it is best to repeat the steps so as to master

Before you get started, set aside all of the parts and tools that you will need to complete this task.

1. Get Ready Bushing Replacement Tools

In order to complete a bushing replacement, you will need to have the following tool on hand:

An open-end wrench
A flat head screwdriver
A torque wrench
A floor jack
Two jack stands
Clamps
To protect against the possibility of fluid loss from the truck when you have the vehicle suspended, it might be necessary to have a receptacle on hand.

2. Lower the Suspension

In order to access the suspension bushings, you will have to remove the rear suspension assembly. If the rear suspension on your car is independent, the two sides can each be taken off separately. To elevate the car, raise the rear with a jack and secure the vehicle in suspension with jack stands.

Along the rear suspension, take off the shock absorbers and bolts. This will allow you to lower the rear suspension. Disconnect the rear brake lines if necessary.
Read more: https://autoremedy365.com/when-to-change-arm-bushing-in-your-car-and-how-to-do-it/