OCTOPLUS BOX FRP TOOL OVERVIEW

1. “RESET FRP UART (UFS CHIPS)” OPERATION. THIS OPERATION WILL NOT RESET/DELETE DEVICE USER DATA.

To perform “Reset FRP UART (UFS chips)” operation, do the following steps:

Put the phone in Download Mode (power off the phone, press and hold "Volume-" + "Home" + "Power ON" buttons) and connect USB cable.

Press “Reset FRP UART (UFS chips)” button.

After Software request disconnect USB cable and connect Samsung Micro UART cable.

Press and hold “Volume-“ + “Power ON” keys for 15-20 seconds, Software will automatically close wizard window and will perform the reset FRP lock.

Done.

2. “RESET FRP ADB (COMBINATION)” OPERATION. THIS OPERATION WILL NOT RESET/DELETE DEVICE USER DATA.

To Reset FRP lock using combination firmware, you can try to do the following:

I.

Write "boot.img" partition from appropriate Combination firmware.

Perform "Reset FRP ADB (Combination)" operation in the software.

II.

Write full Combination firmware.

Go to "Developer Options" in the phone’s Settings.

Check "Enable OEM unlock" option.

Perform Factory Data Reset.

Reflash the phone with full stock (original) firmware.

Note: "boot.img" from combination firmware can be not compatible with current phone's firmware. In that case phone will freeze on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to reflash it with different full stock (original) firmware (or try to write only boot of such firmware).

Love to activate?
WhatsApp: +2348148146981