Wewon Environmental Chambers Co., Ltd. is a great dust chamber manufacturer and made a 3380 litres blowing sand and dust test chamber for a Vietnam customer. The controller system of this 3380 liters dust test chamber can be attached to the computer system. The devices has a vacuum cleaner pump with a distributing pump or suitable feature to maintain the talcum powder in suspension.

This 3380 liters dust test chamber made by Wewon Environmental Chambers Co., Ltd. is driven by a fan to blow a certain focus of sand and dust throughout the test sample surface at a certain flow rate to examine the capability of these test samples (devices) revealed to dry sand or a dust-filled ambience to safeguard against the penetration impacts of dust bits versus rough or obstructing results of crushed rock and the ability of the product to store and operate.

The machine has the capability to replicate drifting dust, which is mostly made use of to test the capability of the shell of the checked product to avoid the infiltration of sand and dust in addition to the subsequent working efficiency judgment under the floating dust condition of the shell and seal of the electronic and electrical auto components.

The Wewon's 3380 liters [https://www.wewontech.com/dust-chamber-manufacturer/]blowing dust test chamber[/https://www.wewontech.com/dust-chamber-manufacturer/] design simulates the devastating effect of wind and sand environment on the product, which is suitable for evaluating the securing efficiency of the product's shell. It is mainly made use of for the IP5X and IP6X tests defined in the enclosure security class standard.

Exactly How The dust test Chamber Functions? Functioning Principle of The 3380 Liters Blowing Sand and Dust Test Chamber:

The blowing dust test chamber layout has an air circulation with vertical blood circulation of dust, and the dust made use of in the test can be reused. The entire duct is constructed from imported stainless steel plate, and the bottom of the duct is gotten in touch with the cone receptacle interface.

The fan inlet and electrical outlet are directly linked to the air duct, and afterwards the diffuser on the top of the workshop is connected to the workshop body in a proper placement to form an O-type closed vertical dust blowing cycle system.

Make air movement can stream efficiently, make dust spread uniformly to a large extent. The sand dust test chamber utilize a single huge power low noise centrifugal fan, according to the test needs to make use of variable regularity governor to adjust the wind speed.