There was a period of time that my dell laptop got into a blue screen of death 2 or 3 times every day, which drove me mad!

So I began to look for and read various posts and tips about Windows blue screen of death. The solution in this post helped me fix the blue screen of death on my laptop, here I would like to share with you guys.

https://www.apeaksoft.com/fix/blue-screen-of-death-on-windows.html

Usually, the appearance of Blue Screen of Death is the result of hardware problem, hardware driver software, or improperly installed software.
A STOP Error will lead to the Blue Screen of Death issue directly. When the STOP Error happens, you will find that your Windows is completely crashed and no longer perform. Then the computer will restart itself, but there will be no data and contents saved in the Windows system, for the reason that the blue screen happens so abrupt that the program gets little time to save the data.

If you also encounter blue screen of death on your Windows 7/8/10/XP, try the methods below:
Step 1. Think back the recent actions on the computer
Try to recall whether you have installed an improper application, plugged in a new hardware, downloaded a custom drives, or changed the system settings recently. If your answer is "Yes", well, the recent actions you took may be the reason for the blue screen issue, which means that the later repairing is depend on the changes.

Step 2. Check out whether your device is overheated
If the blue screen of death is happening when you have been using the computer in a high performance environment for up to several hours, especially the computer does not get an enough circulation, or the computer is in a extremely warm condition, you need to turn off the computer and leave it alone for at least several hours.

Step 3. Delete all unnecessary hardware
Remove any unnecessary hardware from your computer, such as SD cards, USB flash drives, controllers, printer cables, HDMI cables, Ethernet and so on. Their deletion will not impact the normal operation of your computer, by contraries, the flaws in the hardware may result in the blue screen of death, thus it is necessary to delete them.

Step 4. Waiting for your computer to restart
When the blue screen of death shows up on your computer, Windows will diagnose the problem automatically, try to fix all problems, and then restart itself. In most cases, the blue screen error will disappear after the restarting process is complete.

Step 5. Run a virus scan
If the steps mentioned above do not work, you can run a virus scan to help you fix the blue screen of death. It doesn't rule out some accidents that sometimes a virus can trick your computer into thinking it's malfunctioning, which will cause the blue screen error to crash in turn.
If there is any malware appears in the virus scan, delete it immediately. If the virus scan sends you software settings suggestions during the scanning process, try to implement them. You need to know that a defective setting may also cause the blue screen of death to appear.

If you have lost some files due to the blue screen of death, you can use Apeaksoft Data Recovery to scan your computer and recover the lost files.

Recovery files? I don't think that you need to know how it works. If you need to restore accidentally deleted files like photos, documents, music and other, you just need to use special application with this www.cleverfiles.com/photo-recovery-software.html That's all. Like example check this list of the best recovery software, maybe you will choose something from there. Hope you will succeed!

When upgrading to a new version of Windows 10, you may see blue screen errors, which can happen for many reasons. It could be a result of a compatibility problem with an old program or security software. Or it could be because of corrupted files in the current installation or damaged installation media. Usually, when an error occurs, the setup will revert the changes to the previous installation without reason.

To uninstall an app that may be conflicting with the installation of windows 10, use these steps:

Open Settings.
Click on Apps.
Click on Apps & features.
Select the app that may be causing issues and click the Uninstall button.
Click the Uninstall button again.

Quick note: If you're removing a legacy desktop application, you may need to continue with the on-screen directions.

Once you complete the steps, you may need to repeat the steps to uninstall additional apps, and then you can try the upgrade one more time. After the update, you can reinstall the apps again.

If you have access to the desktop, installing the latest updates for Windows 10 and drivers can help stop the blue screen error. Windows 10 downloads and installs updates periodically, but you may still need to check manually to download a critical update.

Regards,
J Wick