Are you leaving your garage door open? No need to worry. The Smart Garage Control (aka WiFi Hub) upgrades most major garage door opener brands to a photo-eye to enable control from your smartphone. Installation is simple, and you can use the myQ app to monitor and control the lights on your replace garage door hinge and myQ home. You can watch and control your door from anywhere in the world, giving you peace of mind. See Smart Garage Controls and Compatible Garage Door Openers to see if your Garage Door Opener is compatible.

myQ app function

• Always log in to the app on your mobile device and make sure the garage door is open and closed.

• Accessible in-app settings.

• Set real-time notifications where the door is and when there is activity. Keep open Anywhere Doors open and close.

• Schedule the garage door to close at a specified time

• Invite up to 5 guests and two co-owners to share access.

• Compatible with Android and iOS, Smart Garage Control Function for Mobile Device.
Smart Garage Control Features

• UL Regulatory Safety Sensor is a general-purpose solution that provides a control for most garage door openers and smartphones.

• Safety features include warning lights and audio sounds that allow people inside and outside the garage to close or close the door.

• Up to 2 garage door openers (requires additional sensors) and 16 myQ accessory controls.

• Up to 1 LiftMaster Smart Lock available at Dallas.

New Door Sensor

• Updated Acceleration Technology to Provide More Accurate and Consistent Door Condition Status

• Watch Sensor Battery Level Status and Notify in myQ App When Door Sensor Battery Level Is Low.
Wireless Installation

• Don't worry about wiring the Smart Garage Control to the garage door opener when receiving and installing.

• Install a WiFi hub on the ceiling or wall near the garage door opener and connect it to a power source. • Install the door sensor on top of the inner panel of the garage door.

• Download the myQ app, connect to your home WiFi, and the myQ app will guide you through the rest of the setup steps.

Replacing the battery of Lock

How to replace the battery of the Lock?

• The lock requires 4 AA batteries. We recommend using a well-known brand of battery. Do not use rechargeable batteries for the LockLock.

Battery Replacement Step

• Locks and slides the battery cover.

• Slide the battery cover up and pull out the ribbon for easy removal of the minus.

• Remove the battery that needs to be replaced by pulling the ribbon.

• Replace the battery on the ribbon. Follow + /.

• Reslide the battery cover to replace it.

Rolling Code Technology and Its Structure

Rolling Code Technology

Warrior Garage Doors - Dallas is committed to continuously improving industry standards for security, safety, and convenience. As technology advances, we improve our products and increase security.

One advance is rolling code technology. Rolling Code Garage Door Opener protects you from intruders by generating a new security code every time you use the remote control. When the remote activates the garage door opener, its algorithm "acts" the remote control code as one of those codes that can exceed 100 billion. The previously used code is discarded, and the opener responds to the new code the next time you use the remote control. The same code has not been used multiple times. The stolen code is lean to the intruder.