If you own a Jeep Wrangler and plan to keep it for a long time, you’ll eventually need to put it in 4 wheel drive. This is especially useful if you plan on driving your vehicle off-road. Putting your Jeep into 4 wheel drive using the steps below will improve handling in icy conditions and snow.
Place the Jeep in neutral. You can't engage 4 wheel drive unless the Jeep is in neutral.
Before you begin to learn how to put a Jeep Wrangler in 4 wheel drive, you will need to be aware of some important facts. First and foremost, you cannot engage four wheel drive unless your Jeep is in neutral. If the transmission is not disengaged when attempting to engage 4 wheel drive, you may cause damage to the transmission or other components of the vehicle. In order for this shift into four wheel drive mode to work correctly, it should be performed with transmissions that have automatic transmissions or manual transmissions with synchronized gears (which allows them to shift automatically).
Find the 4 wheel drive shifter, near your left foot area. If your 4 wheel drive shifter has a part-time or full-time options, then select the option you want to run on. Once you have selected the 4 wheel drive shifter, you can adjust the type of 4 wheel drive you want to run on. If your vehicle has part-time or full-time options, then select the one that best suits your driving needs.
Push the 4 wheel drive shift lever into 4 wheel drive mode and release. Your Jeep will not allow you to shift into 4 wheel if there is an issue with the vehicle, such as a tire is flat or if there is a broken shaft. To put your Jeep Wrangler in 4 wheel drive, you need to start with the vehicle's parking brake on. Then, press and hold the button for at least three seconds until the indicator light turns on. Release the button and then push it again for another three seconds. This will put your Jeep in gear and ready for use.
Read More: https://autoremedy365.com/how-to-put-a-jeep-wrangler-in-4-wheel-drive/