Maintenance Indicator

#Purpose
The Maintenance Indicator function provides information concerning maintenance needs. The data displayed on this screen indicates the status of maintenance in the ECM.

#Accessing
To run the Maintenance Indicator function:
1). Connect CAT ET to the Service Tool connector.

2). Select Maintenance Indicator from the Service menu.

3). The Maintenance Indicator screen is displayed.

*Note: If the Numeric Value is Unavailable, please go to Configuration Tool (F5) then Maintenance Parameters sub-menu.

→Maintenance Indicator Mode
Setting to: Auto-Fuel, Auto-Hour, Man-Fuel, or Man-Hour.

→PM1 Interval
To set the PM1 Interval: Hours or Gal.

→Click OK, and click Yes on the Are you sure... message box.

#Screen Layout

A. Display Area
The Maintenance Indicator display area has four columns:

Description – Provides the name of the parameter
Service Status – Provides the maintenance status of the parameter, ie, whether maintenance is due or over due
Value – Displays the numeric value for maintenance due
Unit - Displays the unit of measurement for the value as defined in the Configuration tool

B. Buttons
The button available in the Maintenance Indicator screen is:

Reset – Click this button to reset parameter data for maintenance purposes. Doing so will prompt the Are you sure... message box. Click Yes to reset the parameters

Have other questions, please contact us Skype: www.obd2.ltd E-mail: Sales@obd2.ltd