AshipaEk0:
Please I'm trying to split the output of a LNB to 2 receivers.

1 decoder, 1 satellite TV

I've tried a 4 way splitter

Neither works. It seems only 1 receiver can work at a time

What am I doing wrong?

Get a two way lnbf.

tessy990:
Is mbc 3 and action still on Nigcomsat?

No Sir.

ticker:
I have this but don't know how to connect to YouTube pls kindly help sir

Contact YouTube or click my signature

ceejay80s:
What if I take my decorder to arena oshodi, and they use their dish to get the nigcomsat signal and channels for me , if take it home and plug in my antenna will it get signals?

Not possible.

ceejay80s:

How did u set it right?

Click the link on my signature

ceejay80s:
Does nigcomsat have another transponder, symboled rate etc?

Use 12659v22500

ceejay80s:

Igando
Someone suggested this....
Input 10972 v 27509 and Raise up your dish a bit .
Still didn't get signal, this joy TV is very easy , if I input nigcomsat 12518 h 29500 it's joy I get

Use 12659v22500

ceejay80s:
I am tired of searching for nigcomsat,
I am not getting any signal even after imputing the transponder 12518 h 29500
Turned my dish to every angle but all I get is joy TV with their rubbish press news

Your location?

officialfestus:
Custom clearance don tire me.

My items entered yesterday one of them was cleared same yesterday and it's already in Abuja line office today.

Toluene15:

R and E are both handled by speedaf.
R (Delivery) - will be delivered to the address on the parcel free
E (Pickup)- You'll be sent a message with an address to pick up the parcel

Wow. Thanks. I now understand.

Greetings great minds. I ordered for two Items one is $42 and the second is $3. I called the different sellers to combined but both said it's not possible. The fist has a delivery date of early January 2024 the second has ending of February 2024 as delivery date.

The first has R , second has E.
Aliexpress says R has tracking while E has no tracking outside China.

The surprising thing is that the E has Speedaf as the logistic handling it and I have confirmed from their Site via the tracking number. So I'm still not clear on what's going on.

Crixie:
Change that fake timing belt today b4 you make that trip

I'm still using my belt I bought from you 6 months and still observing

tessy990:

Thanks. any satellite that i can get mbc action on?

26e, 7e

Satdexter:
I think Satview is not on same satellite as nigcomsat. It's only captured on same lnb

Same satellite but different frequencies

tessy990:
Please is mbc action still showing on Nigcomsat?

No.

Alba3:
Good evening, I just want to confirm if Satview channels on 42⁰ East is still showing. Thank you.

working

kd10:
Good day house ,I on my Srt 4954H & i saw software update display on my screen because my decoder has a WiFi connection i took the remote click on upgrade then it has stocked at 82% for the past 45 minutes still no movement, Pls do i do to avoid the decoder damaging? Thanks guys. Waiting for useful information

If you off the power source you may end up "frying" your decoder. Just wait till it get to 100%

kd10:
Thanks for your i actually do use it for tracking of satellite because of it powerful sensor in picking frequency when tracking for signals hence am interested in asking if i can repair it?Thanks

Why not get a SatFinder? Have you run another software or factory reset it?

kd10:
Pls Gurus in the house i thank everyone immensely for the good teaching & answering of relevant questions being asked from house members Kudos .Meanwhile i have SRT 4922A decoder that the Tuner has suddenly stopped picking up satellite signals even when it does it will flash green in some frequency & go off within seconds in others it will show green but deeply low frequency .
Pls house what is actually the problem and how to rectify it or should i give it to a repairer?
Pls anyone with a similar experience should guide me about this issue
Thanks

Don't waste your money on repairs, get a modern decoder.

TPound:
On the 17th of November which was a Friday, I used the ATM of a bank at a filling station and I was debited but the ATM had dispense error and wouldn't dispense cash.those around the filling station asked me to wait for 24 hours and it will reverse automatically.
All throughout the weekend, I got nothing.
On Monday, I wrote a mail to my bank stating what happened and asked for a refund. They replied that it has been escalated and it's being worked on, but because the ATM I used is not of my bank, they had to contact the other bank to know if the transaction was successful or not and it would take 3-5 working days.
The 5 working days elapsed yesterday and I still haven't gotten any response.
Do I have a case if I decide to sue my bank?

You'll get a reversal hold on . Sometimess it takes more than a week.

Kingdemu:
Same here

Fastest clearing time for me so far.

Joeadeoye2:
My order has started custom clearance for more than 15 days, till now no update.... Which kind wàhálà be dis

Mine came in on Monday as at today it's moving to my location. 2days

oxiide22:
hello bro please can you help me, my 3D TECH 9900HD receiver I accidentally factory reset it now everything has gone no more channels it only show DATABASE is Empty please whtas the problem how can I get my channels back?

Send me email. piwithgod@gmail.com

heartlove:
Good day every one here .

I need best Decoder for free to air . Give me the name .

Thanks

Tiger decoders, MediaStar, Strong Decoder

HOW TO ACTIVATE YOUR TIGER T50 TIKI TAKA

To Activate patch menu and server.

Confirmed by MOM

1. Press F1 111

2. Patch enable "ON"

3. Scroll down to server settings and press "OK"

4. Press the back button of your remote control and you're at server 40

5. Press F1 and "YES" to confirm loading default server

6. Press exit and connect internet to the box

ENJOY

Seyilome:

Boss i did this, but it didn't open any server, the number would just display then nothing else

Hope it's fine now

ogbeh44:
Please does this apply to 4954h?

Press 9878 on the screen of the channel or
F1 1111 to enable patch

Seyilome:

Mail sent

Replied

Seyilome:

Boss i did this, but it didn't open any server, the number would just display then nothing else

Send me a mail. I'll give you my Whatsapp so we can do video call to set it up piwithgod@gmail.com

Seyilome:

Thanks boss, i will do that later today, but why there is no 123 number options on tiger for WiFi hotspot , it only has abc

siimplicity

Seyilome:
Abuwon thanks for today, pls guys I just bought Tiger T10 Razer V3 today, and i don't know how to activate forever server on it. Thanks guys

Press F1 666 on your remote to o open server. Then change disable to enable from 1 to 14. Also press F1 0000 to enable patch