₦airaland Forum

Hello everyone, Please if you are interested in distributing our product in your city please contact me via the information below. We make educational toys and other gift items. We are interested in distributing these ones in the attached pictures. Its a an aid for teaching kids time. Please contact me or reply to the thread if you are interested.

PHONE: 08106902513 PIN:2AC60DA8
Thanks.

Thats great. Giving back to the community. It nice.





www.apexcut.com

Its a funny photo, but looking at it seriously, its embarrassing how corruption has so affected Nigeria that so much time has to be put in while in search of ministers with no previous baggage of corruption. Its worrisome to the president but funny to some people.







www.apexcut.com

If only Nigeria can probe every body from 1960 till date. Those guilty should be punished. But a journey of a thousand miles should begin with a step.







www.apexcut.com

Jungle justice is no way to go. Hopefully the suspected thief repents, looks for a job or start making stuff hoping Nigerians will patronize him.


Quote me as www.apexcut.com

It all depends on the use.


quote me anywhere www.apexcut.com

Laser cut keychain do you like it??

Pic 1 a personal brooch Laser cut and engraved from plywood, inspired by lion head.
Pic 2 my brooch on my senator clocth.
Pic 3 a brooch for a client's wedding in France.

shupsyBaba:
Hello Apexcut,

Posted pictures look nice.
Where is your office address as I
would like to laser print / cut a design done
in Inkscape.

Thanks

office is in enugu. you can send me the file via BlackBerry my pin is up there or you can upload it through our website www.apexcut.com. go to services - request a quote.

will send it to you where ever you are.

thanks

Designing the plywood card holder.

I use primarily two softwares for my designs, namely Sketchup and Inkscape. Use of each is dependent on what I want to make. I also use Gimp for editing pictures before engraving.
The card holder was modeled as a box in inkscape with tabs to allow for a press fit finish. This way I may choose to glue the parts together or leave them as it is since friction between the parts keep them together.

You need to read more details about the process with pictures at http://www.apexcut.com/design-and-fabrication-of-a-simple-pen-holder-using-inkscape-and-laser-cnc/
After determining the dimensions of the box, I set it in inkscape to generate the tabbed parts. Then I modify the parts, welding some nodes together and then leveling the top of the box using incscape path->difference menu option.

Now the parts are set, and I need the logo engraved on the front of the box.
First the logo is loaded in gimp. You may use coreldraw or photoshop for this part too. I choose to use gimp because its free and great!!!
Set the color to grayscale 8bit and save the result. The logo which looked like picture 1 now looks like picture 2.
This is then sent to the laser cutter software which then engraves the part.
The pieces are then assembled to the resulting image 3.

A simple card holder made from plywood. I will be updating later today on how this was designed and the process for getting it done.

Pen and complementary card holder made from clear acrylic.

a picture engraved on MDF wood

Lets make stuff: Thread for handmade stuff using a laser cutter

Hello guys and ladies, this is a thread I will use to introduce a very great tool called a laser cutter and some of the things that can be done with it. I do hope a lot of people here will learn and understand what can be made and possibilities in this process.
I love creating and making stuff. It gives me lots of unquantifiable joy when I have an idea made or produced and the joy gets close to ecstasy when someone uses something I made to his or her delight even if I didn’t get paid for it.
In a layman’s term a laser cutter or laser engraver can be imagined as a needle like tool that can cut through a lot of materials while being directed by a computer.
More detail is that a laser cutter or laser engraver is a tool based on a CNC (computer Numerical Control) which uses a CO2 laser tube or a diode laser as its cutting head tool. It is known for repeat-ability and near precise operations. In order words this tool can help you make a lot of parts that are exactly identical and it can make it several multiple times with very little error if there is any.
Laser cutter or engraver works primarily on planner objects or materials (ie materials that are flat). These materials have to be fairly non combustible while the laser beam cuts through it. Examples are acrylic sheets ( locally called plastic sheets), wood, leather, paper, anodized aluminum, glass, granite, ceramics. It is not suitable for materials like PVC because they burst into flames when laser beams get in contact with them.
I laser cutter is like most other tools that we use. To make wonderful stuff with it, it needs to be studied, understood and mastered. When mastered various objects with varying complexities can be made with it. The laser cutter can operate in two primary modes, as a cutter whereby it cuts through the material, or as an engraver, whereby it engraves the design or picture fed into it using a raster system.
This tool is applied in production of prototypes, and designs for various industries, medical, engineering arts, crafts and for hobbyists. Its cost can range from $1000 to thousands of dollars depending on where you pitch your tent.

Below are some pictures of items I made with a laser cutter. I will update and add more pictures of stuff I have made and those I will make while the thread grows. Note that the pictures are only those that the clients allow for public display.
The pictures:

Organiser for calender and monthly goals, engraved pendant,


In a few hours I will be showing how I designed and made a simple desk business card holder for a friend using a 3.2mm thick plywood material and the laser cutter. After that I will show how some other stuff can be made using a laser cutter and answer your questions.
Then I will try to give out some items made with a laser cutter to those following this thread. So if you like what you see stick around you may have one or two mailed to you.
I promise to answer your questions the best I can on this thread. Those wishing to contact me strictly for business may use my BB Pin: 2AC60DA8 or inbox me using twitter handle @apexcut or nairaland inbox. If you have a question about the process or clarification on how stuff is done, ask on this forum so that everyone will benefit and so I don’t burn out answering same questions individually.

Well he said that??