₦airaland Forum

Sad but true, thank God this is coming from a lady

Training on Flow assurance @Primetek Heavy Industries Limited

*Description:

This course is focused mainly at developing engineers, graduate engineers working on oil and gas field projects and operations who wish to develop their understanding of flow and fluid issues between sand face and separator, and of how to manage those issues.
This course will build on fundamental principles to develop an understanding of what flow assurance is, and how to successfully address flow assurance issues in oil and gas field development projects and operations.

*Objectives:

-To describe fluid-related issues, how to obtain appropriate fluid samples to assess risk of those issues, and ways to manage the issues.
-To provide an understanding of what key project decisions need flow assurance input.
-To investigate methods and software to assist in flow assurance engineering.
-To discuss how to get flow assurance engineering work done efficiently and effectively.
-To identify interfaces with related engineering disciplines, and to describe the necessary information exchange with flow assurance.
-To provide insights into how to assess and deal with operational flow assurance issues.

*Who is this training meant for?

-Aspiring flow assurance engineers and production chemists,
-Engineers in related disciplines (subsurface, petroleum, subsea,process)
-University chemical and petroleum engineering lecturers and researchers

For further enquiries, clarifications and registration: contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani Street, off Ligali Ayorinde Street,Victoria Island, Lagos

Training on Flow assurance @Primetek Heavy Industries Limited

*Description:

This course is focused mainly at developing engineers, graduate engineers working on oil and gas field projects and operations who wish to develop their understanding of flow and fluid issues between sand face and separator, and of how to manage those issues.
This course will build on fundamental principles to develop an understanding of what flow assurance is, and how to successfully address flow assurance issues in oil and gas field development projects and operations.

*Objectives:

-To describe fluid-related issues, how to obtain appropriate fluid samples to assess risk of those issues, and ways to manage the issues.
-To provide an understanding of what key project decisions need flow assurance input.
-To investigate methods and software to assist in flow assurance engineering.
-To discuss how to get flow assurance engineering work done efficiently and effectively.
-To identify interfaces with related engineering disciplines, and to describe the necessary information exchange with flow assurance.
-To provide insights into how to assess and deal with operational flow assurance issues.

*Who is this training meant for?

-Aspiring flow assurance engineers and production chemists,
-Engineers in related disciplines (subsurface, petroleum, subsea,process)
-University chemical and petroleum engineering lecturers and researchers

For further enquiries, clarifications and registration: contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani Street, off Ligali Ayorinde Street,Victoria Island, Lagos

Flexible schedule Training on Solidworks

*Description:

This course teaches the basic principles of 3D SolidWorks. The training provides a thorough grounding for beginners on how to use the SolidWorks mechanical design automation software to build parametric models of parts and assemblies, and how to make drawings of those parts and assemblies.

*Objectives:

At the end of the training, participants will be able to:
-Design product concepts because they can be able to use scanned 3D data, imported images, or simple sketches to demonstrate an initial concept.

-Create an electronic workflow that will cover all tasks right from conception of design, to prototyping to testing for the manufacturability of a design.

Who is this training course meant for?

This course is suitable for Engineers, Fresh graduates, Graduate Engineers

For further enquiries, clarifications and registration: please contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani Street, off Ligali Ayorinde Street,Victoria Island, Lagos

Training on Project Management Essentials

Description:

This course is designed to present the basics of project management with a focus on understanding project management terms, project selection, planning, estimating, scheduling, and earned value management. If you are new to projects or been assigned to projects and need to understand how to manage the project, this is the course for you. This course will also cover the highlights of quality, risk and procurement.

Objectives:

By the end of this course, participants will be able to:
•Understand the fundamentals of project management - the ability to initiate, plan & execute basic controls for a project
•Understand the techniques of project planning and how to deliver one
•Understand how to define project success using key performance indicators & quality metrics
•Identifying risks and understanding the advantages of various types of contracts
•Understand how to control, manage and close a project to your customers satisfaction

Who this course is meant for:
-Fresh Graduates that have interest in project management
-Those who are actually or potentially involved in projects
-Business professionals who currently work on projects or are occasionally assigned to work as project team members in any business work areas.
-Those who directly contribute to projects.

For further enquiries, clarifications and registration: please contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani Street, off Ligali Ayorinde Street,Victoria Island, Lagos

Happy birthday Sir, may God bless your new age

Training on Inventor Pro(Basic) with Flexible Schedule @Primetek Heavy Industries Limited

>DESCRIPTION:
This course covers the fundamental principles of 3D parametric part design, assembly design, and creating production-ready part and assembly drawings using Inventor. Participants will learn how to capture design intent by learning the proper techniques and recommended workflows for creating intelligent 3D parametric parts, placing, and constraining custom and standard components in an assembly, and how to simulate mechanisms & animate assembly designs.

>OBJECTIVES:
The primary objective of this course is to provide Participants with a thorough understanding of the principal 3D design, validation, and documentation processes that they will use to develop products using Inventor. Upon completion of the course, participants will be proficient in 3D part and assembly design and documenting those designs using part and assembly drawing creation and annotation techniques.

>WHO THIS COURSE IS DESIGNED FOR:

This course is suitable for Engineers, Graduate Engineers

For further enquiries, clarifications and registration: please contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, off Ligali Ayorinde Street, Victoria Island, Lagos

Here are some works done using inventor

Oil & Gas Training on UFR (Umbilicals, Flowlines & Risers)

>Description:

This course is mainly designed to help subsea, pipeline and riser engineers understand risers, umbilicals and flexibles (flowlines) and how they operate.

>Objectives:

At the end of the training, the main objective is that participants will be able to:
Identify the different types of risers, umbilicals and flexibles(flowlines) and their uses.

Discuss the latest developments in riser systems

Appreciate how FPSOs impact on the design and layout of risers and umbilicals

>Who this Training course is for:
Engineers, Fresh graduates as well as individuals who have interest in the Oil & Gas Industry

For further enquiries, clarifications and registration: please contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos

Oil & Gas Training on ABAQUS

Abaqus/CAE(Complete Abaqus Environment)

>Overview:

Abaqus/CAE provides a complete interactive environment for creating Abaqus models, submitting and monitoring analysis jobs and viewing and manipulating simulation results.

>Aim:
-Creating parts using the feature-based modeler
-Importing parts into Abaqus/CAE
-Partitioning parts
-Meshing
-Defining analysis attributes
-Submitting and managing Abaqus simulations
-Viewing the results of the simulation

>Benefits:
-Participants will be able to use Abaqus/CAE
to create complete finite element models

-Participants will be able to submit and monitor analysis jobs using Abaqus/CAE

-They will also be able to view and evaluate simulation results

>Who is this course designed for:
This course is suitable for Engineers, Fresh Graduates, Engineering corp members

For further enquiries, clarifications and registration, please contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos

Here are some of the works done using Abaqus/CAE

Best offer on SACS Professional Training 2017
>pros:
-Training will be done by Professionals in the field
-Great discount
-Best experience guaranteed
-Issuance of Certificate at the end of Training session

>cons:
-None

>Overview:

SACS is a software designed for offshore structural analysis and design, it is an integrated finite element structural analysis suite of programs that uniquely provides for the design, fabrication, installation, operations, and maintenance of offshore structures, including oil platforms and wind farms.

>Course Objectives:

The objective of this training is to provide participants with an understanding of the design and construction of offshore platforms, this includes;
-General overview of SACS
-The theory and process of such design.
-The use of current, applicable engineering methods in the design of fixed offshore platforms.
-Design and Construction Considerations
-Design Parameters Specifications
-General Design Considerations

>Who this Training is designed for:

Experienced and non experienced civil engineers, Fresh Graduates, Graduate Engineers.

For further enquiries, clarifications and registration: please contact us @+2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Street, Victoria Island, Lagos
www.primetekheavy.com

Ghostwriter27:
Please, I don't need criticism.
I had sex for the first time a few weeks ago without protection. I told the guy to use one but he said I shouldn't bother, that he wouldn't cum in me so I let him.
The thing here now is I have been feeling funny recently. I can't stand the smell of some certain food. I have been having serious cravings and most of all, I am adding up.
Infact two different people asked if I was pregnant.
How do I know if I am pregnant and how do I avoid it if I am not?
Please I need your help ladies.

Simply go for a pregnancy test, it doesn't cost much and save yourself this whole drama

Get a huge discount and get the best result when you train with us @primetek Heavy Industries limited

AIM:
The Oil and Gas training courses in our portfolio will provide participants especially fresh graduates with broad knowledge of the oil and gas business as well as other disciplines, specific skills, and challenges being faced in different discipline

BENEFITS:
-Train to fill your skill gaps under a short period of time
-Get a huge discount for any of the courses
-Train under Professionals with practical approaches where necessary

some of the our courses in heavy demand are:

>Project Management Essentials
>Mechanical Engineering essentials
>Process Plant Optimization
>Introduction to Electrical Engineering
>AC Electrical Motors & Drives
>Electrical Fault causes, detection & remedies
>Process Engineering Essentials
>Application of Hysys for crude oil processing
>MS Office Siute
>Introduction to ABAQUS
>Introduction to STAAD Pro
>AutoCAD Fundamentals
>Inventor Essentials
>Introduction to SACS
>Introduction to SOLIDWORKS
>Introduction to ANSYS
>Subsea Engineering Essentials
>Umbilicals, Flow lines and Risers(UFR)
>Introduction to offshore structures
>Introduction to Structural Engineering
>Fundamentals of FPSO
>Piping design
>Pipeline Operations & Maintenance

For more enquiries, clarifications and registration, Please contact us @ +2348115638638 or email: babatunde.owoseni@primetekheavy.com
www.primetekheavy.com

Get a huge discount and get the best result when you train with us @Primetek Heavy Industries limited

AIM:
The Oil and Gas training courses in our portfolio will provide participants especially fresh graduates with broad knowledge of the oil and gas business as well as other disciplines, specific skills, and challenges being faced in different discipline

BENEFITS:
-Train to fill your skill gaps under a short period of time
-Get a huge discount for any of the courses
-Train under Professionals with practical approaches where necessary

some of the our courses in heavy demand are:

>Project Management Essentials
>Mechanical Engineering essentials
>Process Plant Optimization
>Introduction to Electrical Engineering
>AC Electrical Motors & Drives
>Electrical Fault causes, detection & remedies
>Process Engineering Essentials
>Application of Hysys for crude oil processing
>MS Office Siute
>Introduction to ABAQUS
>Introduction to STAAD Pro
>AutoCAD Fundamentals
>Inventor Essentials
>Introduction to SACS
>Introduction to SOLIDWORKS
>Introduction to ANSYS
>Subsea Engineering Essentials
>Umbilicals, Flow lines and Risers(UFR)
>Introduction to offshore structures
>Introduction to Structural Engineering
>Fundamentals of FPSO
>Piping design
>Pipeline Operations & Maintenance

For more enquiries, clarifications and registration, Please contact us @ +2348115638638 or email: babatunde.owoseni@primetekheavy.com
www.primetekheavy.com

kateskitty:
Vaseline crew will definitely not like this

"The Illiterates of 21st century are not the ones who cannot read or write but those that can't learn, unlearn and relearn"

Primetek Heavy Industries Limited gives young graduates as well as professionals the opportunity to train themselves in order to fill their skill gap and become employable/advance in their career.

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4: 00 Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Effective Self-Management
Project Appraisal & Analysis
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:
A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Fundamentals of FPSO
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

"The Illiterates of 21st century are not the ones who cannot read or write but those that can't learn, unlearn and relearn"

Primetek Heavy Industries Limited gives young graduates as well as professionals the opportunity to train themselves in order to fill their skill gap and become employable/advance in their career.

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4: 00 Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Effective Self-Management
Project Appraisal & Analysis
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:
A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Fundamentals of FPSO
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

"The Illiterates of 21st century are not the ones who cannot read or write but those that can't learn, unlearn and relearn"

Primetek Heavy Industries Limited gives young graduates as well as professionals the opportunity to train themselves in order to fill their skill gap and become employable/advance in their career.

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4: 00 Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Effective Self-Management
Project Appraisal & Analysis
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:
A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Fundamentals of FPSO
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

Introduction

This Programme steers participants through the technical considerations relevant to each of the stages of the upstream

oil & gas life cycle with explanation of the techniques typically applied in each area by a wide range of discipline

experts.


This Programme is ideal for individuals who are new to the oil and gas industry or to those who have extensive discipline

knowledge in one area but lack a broader appreciation of the overall industry context. It is also ideal for those

intending to provide consultancy and other specialist services to the industry.


Presented by experienced instructors with oil & gas business management and Engineering experience, this programme gives

participants the benefit of decades of hands on industry experience. The workshop style of this course ensures

delegates have the opportunity to ask questions, receiving thorough answers to their individual questions from the

presenters’ past experiences.

Programme Includes following Courses:

Subsea Awareness - Introduction to Subsea (Subsea Structures, Components and Installation)
Subsea Pipeline Design Essentials
Umbilicals, Flexibles (flowlines) and Riser (UFR)
Floating Production Storage and Offloading System (FPSO) Basic
Introduction to Umbilical Flexible Pipe Systems
Introduction to Flexible Riser and Offloading Systems Design
Introduction to Flow Assurance
Introduction to Materials and Corrosion
Introduction to Abaqus FEA
Introduction to Offshore Structural Engineering & STAADPro
Inventor Training Course

For further clarifications and registration:please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com
Venue:Primetek Heavy Industries Limited
184b, Moshood Olugbani st, Off Ligali Ayorinde Victoria Island Lagos

OIL AND GAS TRAINING FOR MARCH 2017


OVERVIEW:

The Oil and Gas industry has always been the one that is sorted after by many, for many years we have been seeing significant changes in the Oil and Gas industry with the emergence of new business models, companies and sources. With high demand for crude oil products such as cooking gas, petrol, kerosene e.tc and the challenges being faced, it is important that young graduates as well as professionals recognize the need for comprehensive understanding of the oil and gas industry, evaluation and decision making skills.

AIM:

The Oil and Gas training courses in our portfolio will provide participants especially fresh graduates with broad knowledge of the oil and gas business, specific skills, and challenges being faced in different discipline

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4:00p.m.
Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Project Appraisal & Analysis
Effective Self-Management
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:

A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Fundamentals of FPSO
Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

OIL AND GAS TRAINING FOR MARCH 2017


OVERVIEW:
The Oil and Gas industry has always been the one that is sorted after by many, for many years we have been seeing significant changes in the Oil and Gas industry with the emergence of new business models, companies and sources. With high demand for crude oil products such as cooking gas, petrol, kerosene e.tc and the challenges being faced, it is important that young graduates as well as professionals recognize the need for comprehensive understanding of the oil and gas industry, evaluation and decision making skills.

AIM:
The Oil and Gas training courses in our portfolio will provide participants especially fresh graduates with broad knowledge of the oil and gas business, specific skills, and challenges being faced in different discipline

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4:00p.m.
Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Project Appraisal & Analysis
Effective Self-Management
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:

A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Fundamentals of FPSO
Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

OIL AND GAS TRAINING FOR MARCH 2017


OVERVIEW:
The Oil and Gas industry has always been the one that is sorted after by many, for many years we have been seeing significant changes in the Oil and Gas industry with the emergence of new business models, companies and sources. With high demand for crude oil products such as cooking gas, petrol, kerosene e.tc and the challenges being faced, it is important that young graduates as well as professionals recognize the need for comprehensive understanding of the oil and gas industry, evaluation and decision making skills.

AIM:
The Oil and Gas training courses in our portfolio will provide participants especially fresh graduates with broad knowledge of the oil and gas business, specific skills, and challenges being faced in different discipline

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4:00p.m.
Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Project Appraisal & Analysis
Effective Self-Management
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:

A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Fundamentals of FPSO
Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

OIL AND GAS TRAINING FOR MARCH 2017


OVERVIEW:
The Oil and Gas industry has always been the one that is sorted after by many, for many years we have been seeing significant changes in the Oil and Gas industry with the emergence of new business models, companies and sources. With high demand for crude oil products such as cooking gas, petrol, kerosene e.tc and the challenges being faced, it is important that young graduates as well as professionals recognize the need for comprehensive understanding of the oil and gas industry, evaluation and decision making skills.

AIM:
The Oil and Gas training courses in our portfolio will provide participants especially fresh graduates with broad knowledge of the oil and gas business, specific skills, and challenges being faced in different discipline

Here are some of the courses we offer with flexible schedule

Time: 8:00 a.m. – 4:00p.m.
Mondays - Fridays

MANAGEMENT COURSES:

Project Management Essentials
Project Scheduling & cost planning skills
Program Management Professional
Project Appraisal & Analysis
Effective Self-Management
Effective time, Task & work planning

HEALTH SAFETY & ENVIRONMENT COURSES:

Advanced HSSE principles & practices
Food Safety Management
Marine Pollution & Management
Major Emergency Response Management
Industrial Hygiene & Occupational Health
Chemical Spills Safety Precautions

MECHANICAL ENGINEERING COURSES:

Mechanical Engineering essentials
Process Plant Optimization
Heat exchangers types, Design & Maintenance

ELECTRICAL ENGINEERING COURSES:

Introduction to Electrical Engineering
AC Electrical Motors & Drives
Electrical Fault causes, detection & remedies
Operations & Maintenance of switchgears & circuit breakers

PROCESS ENGINEERING COURSES:

Process Engineering Essentials
Application of Hysys for crude oil processing

OTHERS:

A-Z of Petroleum Industry
Best practices of enhanced oil recovery
MS Office Suite
Plant design management system
Instrumentations and controls Engineering
Corrosion control in gas , oil & water

ENGINEERING SOFTWARES:

Introduction to ABAQUS
Introduction to STAAD Pro
AutoCAD Fundamentals
Inventor Essentials
Introduction to SACS
Introduction to SOLIDWORKS
Introduction to ANSYS

SUBSEA ENGINEERING:

Fundamentals of FPSO
Subsea Engineering Essentials
Umbilicals, Flow lines and Risers(UFR)
Introduction to offshore structures
Subsea Installation method

STRUCTURAL ENGINEERING:

Introduction to Structural Engineering
Structures Lifting and Transportation Analysis
Principal of Structural Design
Structures transportation & stability

PIPING ENGINEERING:

Piping design
Pipeline Installation analysis
Pipe stress analysis
Pipeline Hydraulics Analysis Using Pipesim
Pipeline Operations & Maintenance

For further enquiries, clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com

Venue: Primetek Heavy Industries Limited
184b Moshood Olugbani st, Off Ligali Ayorinde Victoria Island, Lagos
www.primetekheavy.com

Good news for fresh graduates, Especially those residing in Lagos

Primetek Heavy Industries Ltd

Ongoing Training for FEB 2017

Here are courses we offer with flexible Schedule.
Project Management
Project Planning and Scheduling using Primavera P6
Electrical Design (including ETAP) Training
Introduction to ABAQUS FEA
Introduction to SACS
Introduction to subsea installations
Subsea Engineering Essentials
Umbilicals, Flowlines and Risers
Introduction to Offshore structures
Piping Design
Plant Design Management System (PDMS)
Pipe stress Analysis
Introduction to STAADPro
Instrumentation And Controls Engineering
Pipeline Engineering Essentials
AutoCAD Fundamentals
MS Office Suite Training
Application of Hysys for Simulation of Crude Oil Processing Facility

Flow Assurance Study - OLGA
Pipeline Hydraulics Analysis Using Pipesim
Safety Certified Construction Supervisor - WSO
PV Elite Software Training (Equipment / Pressure Vessel)
Pipeline Installation Analysis
Structures Lifting and Transportation Analysis
Mooring Analysis
Entrepreneurship
Document Management Systems And Document Management Implementation
SOLIDWORKS basics
Introduction to Inventor
Fundamentals of FPSO
Strategic Human Resources Management Training
General Health Safety And Environment
Get Huge Discounts for our Top Courses from February to March 2017.
We thought it would be a good idea if you could access some of these very well sought after courses at a significant discount between now and March, 2017. Overcome your skill gap and get Employable.

For further clarifications and registration: please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com
Venue: Primetek Heavy Industries Limited
184b, Moshood Olugbani st, Off Ligali Ayorinde Victoria Island Lagos
www.primetekheavy.
Primetek Heavy Industries
We only hire the best in the business, so you can be sure you’re working the best designers, builders and inspectors.
primetekheavy.com

Primetek Heavy Industries Ltd

Ongoing Training for FEB 2017

Here are other courses we offer with flexible Schedule.
Project Management
Project Planning and Scheduling using Primavera P6
Electrical Design (including ETAP) Training
Introduction to ABAQUS FEA
Introduction to SACS
Introduction to subsea installations
Subsea Engineering Essentials
Umbilicals, Flowlines and Risers
Introduction to Offshore structures
Piping Design
Plant Design Management System (PDMS)
Pipe stress Analysis
Introduction to STAADPro
Instrumentation And Controls Engineering
Pipeline Engineering Essentials
AutoCAD Fundamentals
MS Office Suite Training
Application of Hysys for Simulation of Crude Oil Processing Facility

Flow Assurance Study - OLGA
Pipeline Hydraulics Analysis Using Pipesim
Safety Certified Construction Supervisor - WSO
PV Elite Software Training (Equipment / Pressure Vessel)
Pipeline Installation Analysis
Structures Lifting and Transportation Analysis
Mooring Analysis
Entrepreneurship
Document Management Systems And Document Management Implementation
SOLIDWORKS basics
Introduction to Inventor
Fundamentals of FPSO
Strategic Human Resources Management Training
General Health Safety And Environment
Get Huge Discounts for our Top Courses from February to March 2017.
We thought it would be a good idea if you could access some of these very well sought after courses at a significant discount between now and March, 2017. Overcome your skill gap and get Employable.

For further clarifications and registration: call please call +2348115638638 or email: babatunde.owoseni@primetekheavy.com
Venue: Primetek Heavy Industries Limited
184b, Moshood Olugbani st, Off Ligali Ayorinde Victoria Island Lagos
www.primetekheavy.com

On psp : Tomb Raider Anniversary
On Android: Max Payne
On P.c : Splinter cell Blacklist

Lol, make una leave my niggar alone oo, he's trying to confirm....

primetek Heavy Industries Limited presents Engineering Training in the oil and gas sector for the moth of february.

Courses includes:
Process Engineering Essentials - Upstream & Downstream Process Control & Optimization for Process Engineers
Introduction to Structural Engineering/ STAADPro for Structural Engineers
Mechanical Engineering Essentials - Rotating & Static Equipment & Structural Integrity for Mechanical Engineers
Introduction to Electrical Engineering and Simulation Tools for Electrical Engineers

Who is this Training for?
This course is suitable to a wide range of professionals but will greatly benefit:
Project engineers, Graduate/ Trainee Engineers
Technical and Non Technical personnel in the oil and gas industry

Venue: primetek Heavy Industries Ltd
184b, Moshood Olugbami st, off Ligali Ayorinde VI Lagos
For Enquires please call +2348133410040
email: babatunde.owoseni@primetekheavy.com