Boreholeexpert's Posts
Nairaland Forum / Boreholeexpert's Profile / Boreholeexpert's Posts
(1) (2) (3) (4) (5) (6) (7) (of 7 pages)
 Properties / Re: Borehole Drilling,soil Test, Pile Foundation And Core Drilling by boreholeexpert(m): 8:39am On May 25, 2018 |
[quote author=boreholeexpert post=67859539][/quote]
|
| Properties / Re: Borehole Drilling,soil Test, Pile Foundation And Core Drilling by boreholeexpert(m): 7:37am On May 25, 2018 |
boreholeexpert: |
| Properties / Re: Borehole Drilling,soil Test, Pile Foundation And Core Drilling by boreholeexpert(m): 8:39pm On May 24, 2018 |
[quote author=boreholeexpert post=67850353][/quote] keep your calls coming! |
| Properties / Re: Borehole Drilling,soil Test, Pile Foundation And Core Drilling by boreholeexpert(m): 8:13pm On May 24, 2018 |
[quote author=boreholeexpert post=67849772][/quote] |
| Properties / Re: Borehole Drilling,soil Test, Pile Foundation And Core Drilling by boreholeexpert(m): 7:54pm On May 24, 2018 |
boreholeexpert:
|
| Properties / Borehole Drilling,soil Test, Pile Foundation And Core Drilling by boreholeexpert(m): 7:16pm On May 24, 2018 |
Are you looking for excellent service providers in project management, groundwater (borehole drilling), geotechnical and foundation investigations (soil tests, core drilling, geophysical investigation and pile foundation), then contact us on Tel: 07049353665 We focus on delivering our projects in a cost-effective manner and on schedule. References are available on request. While our Head office is located in Lagos with branch offices in Ibadan and Akure, we are able to adopt and execute projects all over Nigeria. Thank you!
|
| Agriculture / Check In For Water Borehole Installation by boreholeexpert(m): 7:15pm On May 22, 2018 |
Thank us later we render the best and affordable services you have always wished for. contact us today olu-mikayse company ltd Is a firm that's into borehole drilling, soil test(geotechnical investigation and lab analysis with report), core drilling, geophysical investigation, pile foundation, project management. call us 08146407640 lets talk about borehole drilling and installation!! Borehole drilling. In carrying out borehole drilling projects in Nigeria, I strongly advice every prospective client to assign a geologist with his borehole project. it is important for the client to also beware that we have different borehole types depending on the amount of water needed and it's affordability. We have Direct shallow borehole and industrial(deepwell) borehole. Each one of these borehole types is designed to serve a particular purpose different from the other. In carrying out a drilling project, whether in the basement complex or sedimentary terrain, certain factors like underground water contaminants, depth of the fresh water aquifer, productivity of the well, septic contamination, mineralogical composition of the project site, salinity and so on, should be taken into consideration. Note: A Geo-physical survey is highly recommended. Geo-physical survey is a scientific method of acquiring geological and hydro-geological features of the earth through some standard recommendations and adopted applications. The acquisition data helps both the client and the geologist to make a better judgement. Direct shallow borehole: This borehole type is the most common within lagos and its environs. It is the least expensive of all borehole types, the reason why it is called shallow borehole is because the borehole is not drilled to a far depth, it has active production sustainance and it is economically affordable. In some challenging environments like victoria island, lekki, ikoyi, ajah, lagos island, satellite town,ogudu, etc. There is the possibility of saline contamination,sewage infiltration, organics, hydrogen sulphide(H2S) and run-off incursion in the shallow bed. It is therefore advised that water treatment plant be installed for safety, human health and environmental pressure Industrial or deep borehole: This borehole type is the most reliable in terms of production capacity and resistance to contaminants infiltration. The aquifer is confined and deep depth located. This well production possess industrial capacity, the confine nature of the aquifer is safe from all quality interference . It is the most reliable of all the borehole types and is specially designed for bottle or pure water processing factories, large residence, hotels and high rise buildings, production factories, community water schemes,etc. The deep borehole is the most expensive of all the borehole types, because of the depth and the nature of materials involved in the drilling operations. for affordable borehole drilling and installation on your farmland,kindly send a mail to us on olumikayse@gmail.com or kindly call us on 08146407640
|
| Properties / Expert in geoworks and pile foundation by boreholeexpert(m): 7:06am On May 21, 2018 |
Are you looking for excellent service providers in project management, groundwater (borehole drilling), geotechnical and foundation investigations (soil tests, core drilling, geophysical investigation and pile foundation), then contact Olu-Mikayse Company Limited. We focus on delivering our projects in a cost-effective manner and on schedule. References are available on request. While our Head office is located in Lagos with branch offices in Ibadan and Akure, we are able to adopt and execute projects all over Nigeria. For enquiries and requests, please contact us: Olu-Mikayse Company Limited, G-78, Road 2, VGC, Ajah, Lagos State. Tel: 08146407640 and 07054444977 Email: olumikayse@gmail.com Thank you!
|
| Properties / Expert In Geoworks And Pile Foundation by boreholeexpert(m): 6:22am On May 21, 2018 |
Are you looking for excellent service providers in project management, groundwater (borehole drilling), geotechnical and foundation investigations (soil tests, core drilling, geophysical investigation and pile foundation), then contact Olu-Mikayse Company Limited. We focus on delivering our projects in a cost-effective manner and on schedule. References are available on request. While our Head office is located in Lagos with branch offices in Ibadan and Akure, we are able to adopt and execute projects all over Nigeria. For enquiries and requests, please contact us: Olu-Mikayse Company Limited, G-78, Road 2, VGC, Ajah, Lagos State. Tel: 08146407640 and 07054444977 Email: olumikayse@gmail.com Thank you! |
| Properties / Update For Geoworks And Pile Foundation by boreholeexpert(m): 6:14am On May 21, 2018 |
Are you looking for excellent service providers in project management, groundwater (borehole drilling), geotechnical and foundation investigations (soil tests, core drilling, geophysical investigation and pile foundation), then contact Olu-Mikayse Company Limited. We focus on delivering our projects in a cost-effective manner and on schedule. References are available on request. While our Head office is located in Lagos with branch offices in Ibadan and Akure, we are able to adopt and execute projects all over Nigeria. For enquiries and requests, please contact us: Olu-Mikayse Company Limited, G-78, Road 2, VGC, Ajah, Lagos State. Tel: 08146407640 and 07054444977 Email: olumikayse@gmail.com Thank you!
|
| Properties / Check In For Your Geo Works And Pile Foundation by boreholeexpert(m): 9:30pm On May 20, 2018 |
Thank us later we render the best and affordable services you have always wished for. contact us today olu-mikayse company ltd Is a firm that is into borehole drilling, soil test(geotechnical investigation and lab analysis with report), core drilling, geophysical investigation, pile foundation, project management. call us 08146407640 lets talk about borehole drilling and installation!! Borehole drilling. In carrying out borehole drilling projects in Nigeria, I strongly advice every prospective client to assign a geologist with his borehole project. it is important for the client to also beware that we have different borehole types depending on the amount of water needed and it's affordability. We have Direct shallow borehole and industrial(deepwell) borehole. Each one of these borehole types is designed to serve a particular purpose different from the other. In carrying out a drilling project, whether in the basement complex or sedimentary terrain, certain factors like underground water contaminants, depth of the fresh water aquifer, productivity of the well, septic contamination, mineralogical composition of the project site, salinity and so on, should be taken into consideration. Note: A Geo-physical survey is highly recommended. Geo-physical survey is a scientific method of acquiring geological and hydro-geological features of the earth through some standard recommendations and adopted applications. The acquisition data helps both the client and the geologist to make a better judgement. Direct shallow borehole: This borehole type is the most common within lagos and its environs. It is the least expensive of all borehole types, the reason why it is called shallow borehole is because the borehole is not drilled to a far depth, it has active production sustainance and it is economically affordable. In some challenging environments like victoria island, lekki, ikoyi, ajah, lagos island, satellite town,ogudu, etc. There is the possibility of saline contamination,sewage infiltration, organics, hydrogen sulphide(H2S) and run-off incursion in the shallow bed. It is therefore advised that water treatment plant be installed for safety, human health and environmental pressure Industrial or deep borehole: This borehole type is the most reliable in terms of production capacity and resistance to contaminants infiltration. The aquifer is confined and deep depth located. This well production possess industrial capacity, the confine nature of the aquifer is safe from all quality interference . It is the most reliable of all the borehole types and is specially designed for bottle or pure water processing factories, large residence, hotels and high rise buildings, production factories, community water schemes,etc. The deep borehole is the most expensive of all the borehole types, because of the depth and the nature of materials involved in the drilling operations. for affordable borehole drilling and installation on your farmland,kindly send a mail to us on ayodeletola76@gmail.com or kindly call is on 08146407640
|
| NYSC / Re: NYSC Batch A 2018 Printing Of Call Up Letter. by boreholeexpert(m): 8:48am On Apr 16, 2018 |
donkas: also mobilized to plateau..pls drop your digit |
| Investment / Re: Water Borehole Drilling And Installation by boreholeexpert(m): 11:09pm On Apr 12, 2018 |
boreholeexpert: |
| Properties / Re: All Questions About Geotech And Engineering Answered!! by boreholeexpert(m): 11:18am On Apr 12, 2018 |
[quote author=boreholeexpert post=66643448]This is a thread that answers everything and anything about: core drilling geotechnical investigation pile foundation borehole drilling grouting note:no advertisemt of any kind,we already have enough of that.....bring in your questions lets interract #thinksafetyworksafely still waiting for questions |
| Investment / Water Borehole Drilling And Installation by boreholeexpert(m): 11:14am On Apr 12, 2018 |
Thank us later we render the best and affordable services you have always wished for. contact us today olu-mikayse company ltd Is a firm that's into borehole drilling, soil test(geotechnical investigation and lab analysis with report), core drilling, geophysical investigation, pile foundation, project management. call us 08146407640 lets talk about borehole drilling and installation!! Borehole drilling. In carrying out borehole drilling projects in Nigeria, I strongly advice every prospective client to assign a geologist with his borehole project. it is important for the client to also beware that we have different borehole types depending on the amount of water needed and it's affordability. We have Direct shallow borehole and industrial(deepwell) borehole. Each one of these borehole types is designed to serve a particular purpose different from the other. In carrying out a drilling project, whether in the basement complex or sedimentary terrain, certain factors like underground water contaminants, depth of the fresh water aquifer, productivity of the well, septic contamination, mineralogical composition of the project site, salinity and so on, should be taken into consideration. Note: A Geo-physical survey is highly recommended. Geo-physical survey is a scientific method of acquiring geological and hydro-geological features of the earth through some standard recommendations and adopted applications. The acquisition data helps both the client and the geologist to make a better judgement. Direct shallow borehole: This borehole type is the most common within lagos and its environs. It is the least expensive of all borehole types, the reason why it is called shallow borehole is because the borehole is not drilled to a far depth, it has active production sustainance and it is economically affordable. In some challenging environments like victoria island, lekki, ikoyi, ajah, lagos island, satellite town,ogudu, etc. There is the possibility of saline contamination,sewage infiltration, organics, hydrogen sulphide(H2S) and run-off incursion in the shallow bed. It is therefore advised that water treatment plant be installed for safety, human health and environmental pressure Industrial or deep borehole: This borehole type is the most reliable in terms of production capacity and resistance to contaminants infiltration. The aquifer is confined and deep depth located. This well production possess industrial capacity, the confine nature of the aquifer is safe from all quality interference . It is the most reliable of all the borehole types and is specially designed for bottle or pure water processing factories, large residence, hotels and high rise buildings, production factories, community water schemes,etc. The deep borehole is the most expensive of all the borehole types, because of the depth and the nature of materials involved in the drilling operations. for affordable borehole drilling and installation on your farmland,kindly send a mail to us on ayodeletola76@gmail.com or kindly call is on 08146407640 |
| Agriculture / Borehole Drilling And Installation by boreholeexpert(m): 11:07am On Apr 12, 2018 |
Thank us later we render the best and affordable services you have always wished for. contact us today olu-mikayse company ltd Is a firm that's into borehole drilling, soil test(geotechnical investigation and lab analysis with report), core drilling, geophysical investigation, pile foundation, project management. call us 08146407640 lets talk about borehole drilling and installation!! Borehole drilling. In carrying out borehole drilling projects in Nigeria, I strongly advice every prospective client to assign a geologist with his borehole project. it is important for the client to also beware that we have different borehole types depending on the amount of water needed and it's affordability. We have Direct shallow borehole and industrial(deepwell) borehole. Each one of these borehole types is designed to serve a particular purpose different from the other. In carrying out a drilling project, whether in the basement complex or sedimentary terrain, certain factors like underground water contaminants, depth of the fresh water aquifer, productivity of the well, septic contamination, mineralogical composition of the project site, salinity and so on, should be taken into consideration. Note: A Geo-physical survey is highly recommended. Geo-physical survey is a scientific method of acquiring geological and hydro-geological features of the earth through some standard recommendations and adopted applications. The acquisition data helps both the client and the geologist to make a better judgement. Direct shallow borehole: This borehole type is the most common within lagos and its environs. It is the least expensive of all borehole types, the reason why it is called shallow borehole is because the borehole is not drilled to a far depth, it has active production sustainance and it is economically affordable. In some challenging environments like victoria island, lekki, ikoyi, ajah, lagos island, satellite town,ogudu, etc. There is the possibility of saline contamination,sewage infiltration, organics, hydrogen sulphide(H2S) and run-off incursion in the shallow bed. It is therefore advised that water treatment plant be installed for safety, human health and environmental pressure Industrial or deep borehole: This borehole type is the most reliable in terms of production capacity and resistance to contaminants infiltration. The aquifer is confined and deep depth located. This well production possess industrial capacity, the confine nature of the aquifer is safe from all quality interference . It is the most reliable of all the borehole types and is specially designed for bottle or pure water processing factories, large residence, hotels and high rise buildings, production factories, community water schemes,etc. The deep borehole is the most expensive of all the borehole types, because of the depth and the nature of materials involved in the drilling operations. for affordable borehole drilling and installation on your farmland,kindly send a mail to us on ayodeletola76@gmail.com or kindly call is on 08146407640 |
| Properties / All Questions About Geotech And Engineering Answered!! by boreholeexpert(m): 10:38am On Apr 12, 2018 |
This is a thread that answers everything and anything about: core drilling geotechnical investigation pile foundation borehole drilling grouting note:no advertisemt of any kind,we already have enough of that.....bring in your questions lets interract #thinksafetyworksafely |
| Crime / Re: Lady Calls Out Her Partner For Assaulting Her And Sleeping With Their Maid - Pic by boreholeexpert(m): 11:14pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| Crime / Re: The Shocking Similarities Of The Bank Robberies In Offa And Iwo by boreholeexpert(m): 11:13pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| TV/Movies / Re: IMSU VC, Adaobi Obasi On BBNaija: "Nina Will Undergo Moral Rehabilitation" by boreholeexpert(m): 11:11pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| Politics / Re: Buhari To Include Babachir, Ayo, Others On Looters Lists – Buhari Associate, Ali by boreholeexpert(m): 11:09pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| Foreign Affairs / Re: Brazilian Ex-President, Lula, Surrenders To Police, Begins 12-year Jail Term by boreholeexpert(m): 11:08pm On Apr 08, 2018 |
Really? Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| Politics / Re: Dino Melaye, Akpabio, Saraki And Others Storm Uyo, Akwa Ibom State (Pictures) by boreholeexpert(m): 11:06pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| Family / Re: Woman Welcomes Triplets After Six Years Of Waiting (Photos) by boreholeexpert(m): 11:03pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio ASTM D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.this includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafely |
| Properties / Geotech And Engineering Works by boreholeexpert(m): 10:54pm On Apr 08, 2018 |
Laboratory tests A wide variety of laboratory tests can be performed on soils to measure a wide variety of soil properties. Some soil properties are intrinsic to the composition of the soil matrix and are not affected by sample disturbance, while other properties depend on the structure of the soil as well as its composition, and can only be effectively tested on relatively undisturbed samples. Some soil tests measure direct properties of the soil, while others measure "index properties" which provide useful information about the soil without directly measuring the property desired. Atterberg limits The Atterberg limits define the boundaries of several states of consistency for plastic soils. The boundaries are defined by the amount of water a soil needs to be at one of those boundaries. The boundaries are called the plastic limit and the liquid limit, and the difference between them is called the plasticity index. The shrinkage limit is also a part of the Atterberg limits. The results of this test can be used to help predict other engineering properties California bearing ratio (CBR) D 1883. A test to determine the aptitude of a soil or aggregate sample as a road subgrade. A plunger is pushed into a compacted sample, and its resistance is measured. This test was developed by Caltrans, but it is no longer used in the Caltrans pavement design method. It is still used as a cheap method to estimate the resilient modulus. Direct shear test ASTM D3080. The direct shear test determines the consolidated, drained strength properties of a sample. A constant strain rate is applied to a single shear plane under a normal load, and the load response is measured. If this test is performed with different normal loads, the common shear strength parameters can be determined Olu-mikayse company ltd provides the above service and other services.which includes: 1.core drillings 2.pile foundation 3.borehole drilling 4.geophysical investigation 5.sand search 6.general construction For more enquiries send a mail to us at olumikayse@gmail.com or call 08146407640 #engineeringatit'speak #thinksafetyworksafel |
| Celebrities / Re: Mercy Johnson Steps Out With Her Children (Photos) by boreholeexpert(m): 7:40pm On Apr 08, 2018 |
Good |
| NYSC / Re: #5000 Complete Camp Kits | NYSC Batch A 2018 by boreholeexpert(m): 8:01am On Mar 25, 2018 |
CorpaMarket: where is your location? and how can I actually get them..my shoe size us 45 and for the top,I use large |
(1) (2) (3) (4) (5) (6) (7) (of 7 pages)
(Go Up)
| Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health religion celebs tv-movies music-radio literature webmasters programming techmarket Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 78 |