₦airaland Forum

If you want to know How To Avoid The Common Honda Ball Joint Problem, very simple, just get the genuine Honda part (from genuine Honda dealer or even order and ship the part from US) I use 3 Honda product, one has been with me for 15 years now.... when it first pulled after the first 5 years of use, I had this issue severally for almost 2 years after series of part replacement with parts obtained within the country until I got the genuine parts from US.... from then till now (more than 8 yrs now) this issue has been history.... I used to wonder why this ball joint issue so rampant in Nigeria??

Even if u thief am....

@Automahn,
Please assist me with the report and pix for the vehicle with the VIN shown as in below.
5FNYF4H90BB058206.

Tnx man

@Calculusx
Please assist me with the report and pix for the vehicle with the VIN shown as in below.
5FNYF4H90BB058206.

Tnx man

I am yet to get your own CARFAX report to show me that the 2011 pilot I paid for, which you have been promising to deliver since May, is different from my own report, which shows that the car in question has a unibody damage.
1) You presented to deliver within 21 day of payment, later we agreed on 45 days maximum delivery time, but going to 3 months now, all i have seen thus far are excuses, avoidance, provocations.
2). Ur CARFAX report u promised to bring out within a week, i am yet to see after 6 weeks even with my constant reminders.
3). I refuse to pay heavily for 2011 suv if im not satisfied. I will not overlook again if it is the intention.
Pls respond and act accordingly.

Hi
Hw much can i budget to clear a 2011 honder pilot.

Please help me check this 5FNYF4H90BB058206
Also forward report to abuoma@live.com
Tnx

help me check out this 5FNYF4H90BB058206
...mail to abuoma@live.com

please what is d email address and d fee?

hi sir,
please help me check out this VIN 5FNYF4H90BB058206
Also forward result to the email abuoma@live.com
Thanks

Hi Oyenite,
Please help me check and confirm this VIN 5FNYF4H90BB058206.
Also forward the result to email address: abuoma@live.com
Thanks man.

@Inspired,
How much will land a 2010 honda pilot Touring??
I need details.
tnx

Yeah, that's da signature
cool, and clean,

Hi
pls kindly help me check these out.
1J4GW48S5YC106362
JHLRD18761S001553

Thanks

Hi
pls kindly help me check these out.
1J4GW48S5YC106362
JHLRD18761S001553

Thanks

Hi,
What will each cost to get a clean 2000 - 2001 Hunda crv and 2001 toyota camry, full uption: leather seat, alloyed wheel, low mileage, , etc.
VERY CLEAN.

Send details to abuoma2iii@live.com

Tnx

@poster,
Please forward large pics and Vin to abuoma2iii@live.com

Yes, me I de highly interested in the reply to Oga Kunle's question

Pls, urgently supply me the total cost of getting each of the following vehicles from cotonue:

1) VERY CLEAN 2000 - 2001HUNDA CVR FULL UPTION ( LEATHER SEAT, ALLOYED WHEELS, LOW MILEAGE, , ETC IF)
2) VERY CLEAN 2001 TOYOTA CAMRY CVR FULL UPTION ( LEATHER SEAT, ALLOYED WHEELS, LOW MILEAGE, , ETC IF)

Need to start procuring them within 20 weeks.

Please where is this ride located and forward engine and detailed pix to abuoma2iii@live.com

I,m intrested. Please help forward the pix to madu3ya@yahoo.com

hi nairalanders
I STUDIED ENGINEERING 4 AGO & CAME OUT WITH 2.1
I HAVE A JOB THAT I THANK GOD FOR. BUT I CAN CONFIDENTLY TELL YOU THAT YOUR GRADE IS NOT A MAJOR FUNCTION OF YOUR GETTING A JOB.
MY FRIENS, ONE GOT FIRSTCLASS AND STILL UNEMPLOYED, THE OTHE A PASS AND IS NOW A MANAGER OF HIS OWN BUSINESS [AFTER WORKING FOR SOMEBODY FOR TWO YEARS]

THE POINT IS THAT AT ANY POINT IN TIME AND PLACE YOU FIND YOURSELF, TRY TO BE AMONG THE BEST; IN SCHOOL, AS AN APPLICANT OR WHILE WORKING. DEVELOPE YOURSELF AND OBTAIN PROBLEM SULVING SKILLS AND ABOVE ALL LET GOD DO THE WONDERS. DO NOT LET THE MISTAKES OF YESTERDAY HINDER YOUR TODAY'S EFFORTS.

THAT'S ALL.

SHALLOM.

Good day nairalanders,

More greese to una elbows (& knees) for the good jobs you people do here.

Please can anyone help or inform me on how to get ETAP POWERS TATION electrical engineering software. I need it like yeaterday.
Will very much appreciate your contributions.

Thnk you.

I think  has a point. i just got promoted to a position in my unit at work. At the same time, two expertrates ( with certs from foreing universities) were also employed, at the same level (experience & accademic qualifcn) with me. The funny aspect of it is not just that they are understudying me ( ie i train them on what to do) but are paid 20 times what  they pay me.
Is this not madness?

Hello guys.

This messege is specifically for those that've got the engineering softwares (PDMS, Hysys, ceaser, olga, firstvue etc.).
I attached a copy of istallation instructions in each of the software package. so there is no need need to call me for the installation procedures. You can call me if you get hooked during installation or if you are confused, but the installations instructions attached therein are very clear and many have used them to do there stand alone installations easily without contacting me.

Thank you.
let us continue to build our professional career up to that standard acceptable worldwide.

BY now, many are now very aware of the importance of these engineering softwares and i am happy about it. one needs to empower oneself. If anyone needs any of the sofware, he/she can contact anybody around him/she who has got them, or can contact   ekwoke76@yahoo.com,  08039315138

Thanks again.

You must not miss this great opportunity. bank or no bank, get the training.
even if you were not employed after the the traing, you still have a great opportunity to secured a much more better job with the aid of that training, especially in the oil and gas industry.

hello guys,

i,ve got very important engineering design softwares for various engineering disciplines.
if you are intrested, contact d no: 08083782580. e-mail:    ekwoke76@yahoo.com
the softwares are:

1) AUTOCAD 2006, AUTOCAD 2007 [ENGINEERING DRAFTING]

2) VANTAGE PDMS [ENGINEERING DRAFTING, DESIGN AND MODELLING]

3) CEASAR II [ FOR MECHANICAL/PIPING ENGINEERS]

4) ASPEN HYSIS [FOR PROCESS ENGINEERS]

5) BENTHLY AUTOPIPE  [ FOR MECHANICAL/PIPING ENGINEERS]

6) FIRSTVUE [FOR PROCESS INSTRUMENT ENGINEERS]

7) CHALMLITE [ELECTRICAL, ILLUMINATION ENGINEERS]

OLGA 2000 [ FOR PROCESS ENGINEERS]

9) PSCAD [ FOR ELECTRICAL ENGINEERS]

These are very heavy and important engineering softwares and very useful especially in the oil and gas sector.
The knowledge of how to use these softwares ( the ones concerning your engineering discipline) will give you an upper hand, either practicing or looking for a job.

will supply them cheap, but not free.