₦airaland Forum

Hi my name is bidemi, reside in lagos, I need a serious God fearing beautiful lady btw 25 and 32 and must be a working class for a serious relationship, +234‎8086038165

Hi my name is bidemi,reside in lagos, I need a serious God fearing beautiful lady and must be working, btw 25 n 32 for a serious relationship, ‎+2348086038165

@Coco diva, I sent him message already, may be he is busy he will definitely respond when he has time I know him for that.

1) Make. volkswagen
02) Model. Passat
03) Engine size. 1.8
04) Transmission type. Automatic
05) Model year. 1999/2000
06) Spec (US).
07) Drive configuration front wheel.

I have this issue I posted here last year. I have this issue of engine starting and going off when the car is started in the morning, it will do this until the engine is warm then it work fine through out that day. I ran a scan and have this error code,P1426-tank vent valve open,P0102-mass or volume air flow meter circuit low.

I recently replace the MAF, the car work for two days then it developed series of issues.
1.It started to jerk when idling but will be ok when in motion.
2. Engine going off even if in motion at say about 2min interval but will start immediately when restart
3. It started to consume fuel most especially in traffic. I spend twice as much before I park it.
4. Lost of engine power.
5. I park it for 1 week but is not even starting again.

I thouhgt it must have been the MAF that I replaced that was responsible but ran a scan and obtain the following codes:
1. The two error codes stated above
2. P1239 - Cyl-3-fuel inj.circ. open circuit
3. P117 - O2 sensor heater circ. bank 1 sensor 2 short to ground
4. P1289 - Turbocharge bypass valve short to ground.
5. P1472 - Evap Emission control LDP circuit short to ground
6. P1435 - Secondary Air injector system pump relay circuit short to ground
7. P1421 - Secondary Air injector valve circuit short to ground
8. P1115 - O2 Sensor heater circuit bank 1 sensor 1 short to ground
9. P1114 - Bank 1 sensor 2 internal resistant too high
10. P0134 - O2 sensor circuit no activity detected Bank 1 sensor 1
11. P0140 - O2 sensor circuit no activity detected Bank 1 sensor 2

Please Siena, I need your advice on these issues. I sent you bb message that I will post the issue here.
Thanks inadvance

Siena: Bro, could you please clarify your engine type / size? Because the combination you've posted doesn't exist.

Ok, its 4 cylinder, 2.0 litre engine and not V6, every other thing remains the same. Thanks

Hello Siena and thanks for this wonderful job you are doing.

1.) VW
2.) Passat
3.) 4, 2L
4.) Auto
5.) 2000
6.) US
7.) ?

First, the initial problem with the car is
1. Difficult to start when cold usually in the morning when starting it for the first time on a particular day. The engine will starts then dies after approximately 2 seconds, at other times it last for about a minute or 2 before it dies.
What I used to do is, whenever it starts I quickly put it in drive and accelerate at the same time. If I'm not fast enough it dies. Once I'm able to start and move it that's the end of that problem that day.

2. A rewire that was helping on it checked for fuel pressure and discovered it was ok, suggest cold start but also is working fine, service nozzle and injector and clean O2 sensor to no avail. But after all these services the car has stated to jerk like trying to choke.

So now if the car eventually starts, it drives as normal but becomes sluggish and jerky once warm and the engine will dies but will start immediately or after like 2 minutes. So the rewire has aggravate the issue.

3. There is all these warning light display on the dash: Check with a tap icon; temperature icon always flashing even in the morning before the car has warmed, the temperature is always on 90 even when warm; ABS; Brake; Car icon with trunk opened; EPC; and is flashing brake fault STOP and service manual.

Please I will appreciate it if you can help me, thanks

@leslexx or sammy whatever it is that is your real name, your mouth is just running wide from the start of this thread, just take a moment yourself and read all your responses and reactions to all those who are genuinely interested in helping you? Its total crap coming from one who supposedly wanted to employ or to be real who needed help. Look at you threatenning to go to police on a public forum? here in Nigeria? Why are you deceiving yourself and fellow nairalanders like this? I am waiting for you and your police, bring it on. I don't know why you are being so childish

@leslexx, if you keep saying that i don't know you i will go ahead and post your address and phone no here right now? I can even do a sketch of you and scan it then paste here. I still have good memory of you if you have not shave your goaty bears. The look of you that day definetly does not suggest you own the place. The online travel booking you were trying to modify definetly was given to you by your boss to modify. For the record you didn't post a job, you posted something about you having a problem with xml in asp.net, i genuinely wanted to help. Any reasonable person here can easily decern the kind of person you are without even meeting you, with your manner of approach. If you still claim that i dont know you then i will come out at you more. ind of person you are without even meeting you, with your manner of approach. If you still claim that i dont know you then i will come out at you more.

@leslexx, i probably won't have responded but because of the way you are responding to those innocent guys who just want to genuinly know what they want to get into really got me furious. For the record you never really conduct any interview with me, you said you needed someone to help u fix a problem but on getting to your house (your supposedly office) you said you have been able to solve the problem. Was it not an open source cms code you were trying to modify? Common go and sit down, can you even pay for someone to come and help you fix a problem not to mention paying salary?

So u are still with this cms thing? Thanx for wasting my time and money the other time. You ask me to come and after sampling my opinion you then think you can do it by yourself abi? When you know you are not a programmer? look at how much time you have wasted?

I will do it free for you, give me fuel 4 my gen then d job is done : dazz4real2000@yahoo.com

You can get in touch with me: dazz4real2000@yahoo.com, i will do it for u in no time at a very reasonable cost with the source code inclusive

Yeah, i quite agree with your points that one needs to be outstanding but the problem is if there is no job then there is no job. For example a company needs to employ just 2 people and they have 100 qualified canditdates. If they all perform well by displaying all those qualities you mentioned, will they employ all of them?

Thief!

A php 5.3 book pointed out that one of the advantages of asp.net over php is that asp.net process a request faster than php engine because asp.net C# or Vb.net is a compiled language and load faster after the first compilation but a php engine will always process every script for every request. Php has its own advantages and disadvantages as any other language

Will the ebook really work miracle for me? Cos i need a good job badly as soon as possible. I think we should try it before we condemn the idea

I have never read or write java before so i don't know if i'm correct. if ok you can easily convert to C#

Public Shared Function toDate(ByVal d As Date) As String
            Dim fieldDate As String = ""
           d.AddMonths(1)
            d.AddDays(1)
            fieldDate = d.ToString("d")
            Return fieldDate
End Function
Public Shared Function toDate(ByVal d As Long) As String

            Dim _date As Date = New Date(d)

            Return toDate(_date)
End Function

dazz4real2000@yahoo.com

Instead of connecting your crystal report directly to the database tables, you can connect a dataset to crystal reports and then use sql query to populate the dataset using value from textbox as query parameter.

Does your business requires a website? This is an opportunity for two people or company to own a website with or without database. All you need to do is to provide the specifications or details. I will do the design and when done you will pay the hosting and domain fees which is between N5000 and N10000 depending on size.
Call:08160069206 or send email to dazz4real2000@yahoo.com

So many things is wrong with your query. First i think its easier and better to use parameterised query.
And use single quote for your values

what kind of component did u reference in that APIFUNCTION class? if u use a COM+ or .NET Enterprise services, then u have to generate a COM type library from the assembly and register it into the windows registry and COM+ catalog on d remote server before that class can work on d remote server.

dayo4me@gmail.com

check that the apiFunction you reference in your application is present and working on d files u uploaded 2 d remote server

After looking for job and couldn't get one then i saw an opportunity to become a programmer
and went for it. I didn't even know much about IT then. I use VB.NET

I started programing at about 30 and i'm making a living from it

Why don't you declare a variable in your code and then concatenate it with the returned value

The strategy that i will give you is to use a method called fire for fire. Mind you, im not saying you should do what he is doing to you to get back at him. What im saying is that you should try and pay less attention to him, stop directing all your energy his way. Try and focus on something that will take most of your time, something that will make you happy, like starting a new class, a new business, finding a new hobby, something that will make you meet good people. At the end you will have gained on two sides, you will win him back and you will have developed yourself in some interesting areas of endeavor.

The thing is, he will come back to you when he sees that you are happy without him and other good people are given you all the attention you deserve and your achievements.

Then when you eventually got him back, try and apply some of the advice given to you earlier by nairalanders, that you should try and find out what you are doing wrong and apply the correction.

You are all deadly wrong for passing judgment based on one side of a story. I think we should ask the girl what she and the married man always does in the office. probably the guy dont like what they normally do and she regard it as nothing, i think a woman should respect her man and make the relationship serious.

Ladies like messing around a lot even when they are engaged. When asked why they doing what they are doing, they always answered, i'm i sleeping with guy? like Beyonce in ("If I were a boy") They believe they are just having fun. Thats wrong in a serious relationship

Most girls are looking for husband, even if they found one, they cant seem to let go of some of their despicable acts and yet they would want their man to trust them. The thing is their is not always smoke without fire, the guy must have been seeing something.

Be faithful and put your relationship first, if you yourself trust him and then see if he trust you

NOW YOU CAN new
EARN GOOD MONEY
WITHOUT ANY CAPITAL

This opportunity is for you if you have good skills selling computer software; even greater advantage if you also have good IT support skills.
if you meet the above requirement send email to softsellersng@yahoo.com

Clearly state: your qualification; The State where you reside; your email address; your phone number