₦airaland Forum

https://m.ebay.com/itm/BF3001B-Navy-Blue-Floral-Men-Woven-Silk-Self-Bow-Tie-Pocket-Square-Set/261835609105?var=560690022333&hash=item3cf69e5411:m:mgMo8Mavx8AGrVyn1s-p__Q
Check this stuff and check what it will cost me in total of buying 4

enochogaga:
Normally ur gen charges the battery by itself, first u need to check if ur gen is actually changing the battery,
2. If the battery did not start or make any attempt to start the gen.
This is what u do, disconnect the wire red and black from the battery, and use wire the spark the baterry terminal, if it spark then the battery is OK, if it does not then remove ur battery and go and charge it.

Then if u want to know the ur gen is changing ur battery, also spark the black and red wire that u all ready disconnected from the battery, u will see very small or faint spark, that tell u the gen is charging the battery

Wow! did as instructed, there was no spark from the battery.
How do I charge the battery to come back to life sir?

enochogaga:
Is either the Nepa volt is too high, or the volt switch need to be regulated.

Thabks. The voltage is around 150-170, Pls how do I regulate the volt switch.

Also, sorry for deviating prof.
My 5000watts stabilizer has been on protection mode for 3 days now after some minutes of power fluctuations.
What do I do to make it go back to its normal mode.thanks

Great work prof.
Pls I got a little issue with my lutian key starter Gen of less than a year.
This morning when I tried starting it with the key no single response. Does it mean the battery is weak and need to be charged?
Please how do I charge the battery?