₦airaland Forum

Strongbest:
Harmattan Body Cream Recipe

Ok, let's roll. I may be dropping several recipes if I have the grace. First, let's kick start with this:

Using a white plastic spoon as your measuring unit.

1. Jelly-----------------------3 spoonfuls

2. Paraffin oil-------------3 spoonfuls

3. Shea butter-------------1 spoon

4. Rose water--------------3 spoons

5. Olive oil------------------3 spoons

6. Fragrance--------------as desired.

7. Colorant (optional).......as desired.


Direction:

- Put the jelly in clean dry pot and apply heat

-Add the shea butter and stir slowly as it melts along with the jelly

- Add the paraffin oil and allow everything to melt completely

-Turn off the heat

-Add the rose water

- Add the olive oil and stir

-Add the fragrance and stir

-Add the colorant if any.

Notes:

-A gas cooker is better used or a hot plate. If you must use a stove, make sure you turn it low and allow the flame to be blue.

-You may replace the paraffin oil with any other oil of your choice.

-For those of you that already know how cream is mixed, to lighten the skin, use the information available to you. You do right after the rose water is added.


Stay tuned for more.

And as usual, click the like button once you are done reading so we can move on.

Do Not Quote Me Please!

Thanks.

Strongbest:
Heyllo ma'am, you don't need to but if you do, it'll still work well. Remember, the essence of that is to help you thicken up your nitrosol and help you see the level of thickness immediately.
Just make sure you stir very well immediately you pour the diluted sulphurnic acid.


Sulphurnic acid is in liquid form, you actually dilute not dissolve. (O, well, the term dissolve can also be used in a way).

The instruction says, dilute the sulphurnic acid with water. You have to dilute the sulphurnic acid with water first before combining or adding it to the dissolved nitrosol.




Thanks.

Strongbest:
Heyllo ma'am, you don't need to but if you do, it'll still work well. Remember, the essence of that is to help you thicken up your nitrosol and help you see the level of thickness immediately.
Just make sure you stir very well immediately you pour the diluted sulphurnic acid.


Sulphurnic acid is in liquid form, you actually dilute not dissolve. (O, well, the term dissolve can also be used in a way).

The instruction says, dilute the sulphurnic acid with water. You have to dilute the sulphurnic acid with water first before combining or adding it to the dissolved nitrosol.




Thanks.