SYLLABUS

We offer professionals the basic and advanced knowledge on PDMS by concentrating on

1 EQUIPMENT
2 PIPING
3 ISODRAFT
4 STRUCTURES
5 HANGERS & SUPPORTS
6 DRAFT
7 ADMIN

DESIGN MODULES

Equipment Modeling- As per vendor drawing and equipment layout

Modeling of Horizontal Vessel
Modeling of Vertical Vessel
Modeling of Heat Exchanger
Modeling of Pumps
Modeling of Stacked Heat Exchanger
Creating the standard equipments
Creating obstructions
Equipment commands-All equipment commands are covered.
Setting the obstructions.
Changing the position of the component with respect to world command
Modify command
Rotate command
Mirror command
Offset command
Measure command, etc - (All Equipment commands are covered).


PIPING MODULE

Pipe routing- As per piping layout and P&ID
6 Routing on projector
Total 10 routings for practice
How to provide spec break
Providing offsets
Providing slopes
Usage of model editor.
Solving Data inconsistency & clash check
Piping commands (All Piping commands are covered).

ISODRAFT MODULE

Isometric Generation- As per pipe routings
Extracting of Isodraft
Splitting of Isometics
Providing flow and penetration attachments.
Export the drawing to AutoCAD

STRUCTURAL MODULE
Structures- As per Equipment layout & piping layout
Beams and columns
Create beams and columns
Extend beams and columns
Creating Bracings
Generating the reports
Structural commands (All Structural commands are covered).

Panels and plates
Creating panels and plate
Cutting panels and plate
Splitting of panels and plate
Penetration of panels and plates

Floors
Creations of floors

ASL modeler
Creation of platforms
Creation of ladders
Creation of stairs

HANGERS AND SUPPORT MODULE
- Supporting the Equipments, structures, pipes
Modeling of supports
Modeling of line guide ,hold down, limit stop.
Modeling of stiffner plates,doubler plate.
Modeling of cap plates.

DRAFT MODULE
- Final output of Plant layout
GA-Drawing creation in 2D
Creation of sectional views
Dimensioning, Labeling
Export the drawing to AutoCAD
Reflecting the design changes in draft
Commands in draft

ADMIN MODULE
Creation of new projects
Creation of teams, users, DB’s, MDB’s
Project maintenance
Access control right

Kindly call 08036614808 for further details

Process Piping Engineering is a branch of Piping Engineering that deals with the construction of refineries and chemical plants, an integral subject in the oil& gas industry
An opportunity is here to acquire a sound, thorough and comprehensive training to become a Piping Engineer and prepare yourself for the lucrative oil and gas industry jobs here in Nigeria and abroad.
The course content has been carefully designed to cover vital areas of the subject matter in order to afford all trainees the expertise they require on this area of engineering , the way employers want it.
The course content includes but not limited to the following:
Piping Basics
Pipe supports
Piping Layout
Pump Layout
Valves
Pipe Span Support Calculations
Process Flow Diagram (PFD) development and review of the following:
• Water treatment plant
• Crude Seperation Unit
• Expansion Drum Unit
• Gas Scrubber /Steam Generation Unit
Piping and instrumentation diagram P&ID
Control Station Assembly Design
Pressure Drop Calculation Using;
• The equivalent length method
• DARCY WEISBACH Equation
• HAIZEN WILLIAM Equation
NPSH Calculation etc

Kindly call 08036614808 for more details and enquires

Process Piping Engineering is a branch of Piping Engineering that deals with the construction of refineries and chemical plants, an integral subject in the oil& gas industry
An opportunity is here to acquire a sound, thorough and comprehensive training to become a Piping Engineer and prepare yourself for the lucrative oil and gas industry jobs here in Nigeria and abroad.
The course content has been carefully designed to cover vital areas of the subject matter in order to afford all trainees the expertise they require on this area of engineering , the way employers want it.
The course content includes but not limited to the following:
Piping Basics
Pipe supports
Piping Layout
Pump Layout
Valves
Pipe Span Support Calculations
Process Flow Diagram (PFD) development and review of the following:
• Water treatment plant
• Crude Seperation Unit
• Expansion Drum Unit
• Gas Scrubber /Steam Generation Unit
Piping and instrumentation diagram P&ID
Control Station Assembly Design
Pressure Drop Calculation Using;
• The equivalent length method
• DARCY WEISBACH Equation
• HAIZEN WILLIAM Equation
NPSH Calculation etc

Kindly call 08036614808 for more details and enquires

Become a Piping Designer/Engineer by undergoing one or all the following technical trainigs
1 Process Piping engineering
2 Plant Design Management System PDMS
3 Stress Analysis Using CAESAR11
CALL 08036614808

A rare opportunity is here for those who want to pursue a career in the OIL&GAS industry and those who had at one time learnt the PDMS but were not properly trained.The PDMS is a 3D software used for the designing of refineries and other chemical plants in the OIL&GAS industry.The course will afford you the specialist skills you require to use the PDMS the way the employers want it.You will learn how to DESIGN and not just MODEL with the software,more importantly,how to use the COMMAND LINES and not just TOOLS.Other modules include but not limited to the following, PUMP PIPING
HEAT EXCHANGER PIPING
MANIFOLD DESIGNING
HANGERS AND SUPPORTS
STRUCTURAL DESIGN
EXTRACTION OF REPORTS VIA THE EXCEL SPREADSHEET ie THE MTO
GENERATION OF MTO FROM THE P&ID
DRAFT AND ISODRAFT ETC
A rare opportunity you must grab with both hands,a 60%~70% proficiency in the use of PDMS is assured after the training.Get prepared for the numerous constructions that will come very soon in the Nigerian OIL&GAS industry. Call 08036614808 for further enquiries. Facebook add GBENGA OJOAWO ,TWITTER HANDLE; @gbengusgbengus

Learn how to use the PDMS proffessionally and get that dream job in the oil&gas industry.For enquires,call 08036614808!

Learn PDMS the professional way by using the software to design and not just model,make use of the COMMAND LINES and not just tools.Call 08036614808, for further inquires.

Grab this opportunity to become a process piping engineer with PDMS by enrolling for a one month intensive training programme.Kindly call 08036614808 for further enquires.

A rare opportunity is here for those who want to pursue a career in the OIL&GAS industry and those who had at one time learnt the PDMS but were not properly trained.The PDMS is a 3D software used for the designing of refineries and other chemical plants in the OIL&GAS industry.The course will afford you the specialist skills you require to use the PDMS the way the employers want it.You will learn how to DESIGN and not just MODEL with the software,more importantly,how to use the COMMAND LINES and not just TOOLS.Other modules include but not limited to the following, PUMP PIPING
HEAT EXCHANGER PIPING
MANIFOLD DESIGNING
HANGERS AND SUPPORTS
STRUCTURAL DESIGN
EXTRACTION OF REPORTS VIA THE EXCEL SPREADSHEET ie THE MTO
GENERATION OF MTO FROM THE P&ID
DRAFT AND ISODRAFT ETC
A rare opportunity you must grab with both hands,a 60%~70% proficiency in the use of PDMS is assured after the training.Get prepared for the numerous constructions that will come very soon in the Nigerian OIL&GAS industry. Call 08036614808 for further enquiries. Facebook add GBENGA OJOAWO ,TWITTER HANDLE; @gbengusgbengus