Ugoc3:


Low rpm at operating temperature..when I switched on a.c..rpm goes to 200rpm..

200 is too low , drop ur email
You should scan and paste error codes here

Ugoc3:




No..how about you

I changed the abs sensor yesterday and abs light is gone
Cleaned the throttle body this morning and it’s working fine
Would use for a week and see if It stable (RPM)
What’s wrong wit ur car? Explain maybe I’ll Av an idea

Dozieson:


Those code would have been better than the description above. Why not get a small Bluetooth scanner for self diagnosis?

A failed abs can cause your car to drag from a take off point

I’ll get one soon
Thanks

Dozieson:


Show us your scan results

I left my Rewire shop alrdy
It was showing abs sensor
Catalyst one and two
And engine switch

Dozieson:


Faulty abs or faulty abs sensor? Where is the code?

Faulty abs sensor
The abs light is on and scan showed it’s faulty
Can it affect RPM?

[quote author=Henray02 post=119300225][/quote]

It doesn’t vibrate at all, only hesitate a lil when I step on gas . I have one faulty abs sensor
It’s a toks engine.

[quote author=Worldwyde post=119299584]Your engine is coming to an end. Normal rpm supposed to be between 900 and 1300rpm. If it starts vibrating at 900. Ypur engine compression is low and
Coming to Ann end. Sell the engine and buy soleh engine.direct toks[/quote
It’s a toks engine
Changed it 3 months ago
It drives well and picks up when I accelerate. Only problem is low RPM

Ugoc3:
Carmy 2002 rpm is always low or flat low whenever the .ac is on...
I have already serviced the throttle body/sensor...
Cleaned the air filter
Changed the throttle pedal sensor
Still the problem persist.. especially when the car is at running temperature...
Pls..any advice to this problem

I have same prob. my RPM is below 800 and doesn’t make my AC to chill, at cold start it works fine but when engine warms up the RPM drops to 500
Were you able to fix yours ?
I need help please
Note: I’ve checked wit anothe throttle body, throttle position. Sensor and even tried another brainbox but it’s still same low RPM
I NEED HELP PLEASE
ITS Camry 2003 V6

Ugoc3:
I have a similar problem with Camry 2004

I have the same problem , my RPM is below 800 and doesn’t make my AC to chill, at cold start it works fine but when engine warms up the RPM drops to 500
Were you able to fix yours ?
I need help please
Note: I’ve checked wit anothe throttle body, throttle position. Sensor and even tried another brainbox but it’s still same low RPM
I NEED HELP PLEASE
ITS Camry 2003 V6

felix55:

Don't repair it pls... Waste of money & time. Just buy 2nd new & fix... Enjoy ur ride..

Ok thanks

need help please , my 2004 camry steering rack is loose , can it be fixed ? When M on the highway, it sways side to side , I’ve changed the linkages and ball joints but no changes . My mechanic said it’s the steering rack , that I need to replace it . I need suggestions please
Can it be repaired or I should go for another ?

I need help please , my 2004 camry steering rack is loose , can it be fixed ? When M on the highway, it sways side to side , I’ve changed the linkages and ball joints but no changes . My mechanic said it’s the steering rack , that I need to replace it . I need suggestions please
Can it be repaired or I should go for another ?

I need help please , my 2004 camry steering rack is loose , can it be fixed ? When M on the highway, it sways side to side , I’ve changed the linkages and ball joints but no changes . My mechanic said it’s the steering rack , that I need to replace it . I need suggestions please
Can it be repaired or I should go for another ?

Ikenna351:


Honestly, you brought the problem upon yourself. EFI engine is not a carbureted one. You should have checked for the compatibility of the ECU and harness before buying that replacement. There is no cut corners with an EFI engine. You should have waited, saved enough and purchased the exact engine in the car.

The auto rewire or whoever did the scanning was right that you either drive the car with the MIL permanently on or you replace that engine with factory one.

Modifications can be done in EFI system to work with another swapped in different engine, but you will need to know your onions. Its more or less a conversion.

Though, ECU can be tricked, to believe that a sensor is still attached, like the o2 & CTS and run without them well. But i dont know if such can be done with cam position sensor. Lets hear from Siena, Trac, Sultaan and other experts opinion on this. I really dont have solution to this issue.

Ikenna

I have the same problem , my Camry 2003 V6 engine was changed , mechanic bought Siena engine that doesn’t use Camshaft sensor , RPM goes too low and AC doesn’t chill , only blow cold when driving, also acceleration isn’t fast at startup , I just complained and he told me it’s a minor thing . He’s going to fix that . House is it possible ?
Any chances it would be corrected ?

Deneistein:
Pls can I have your number, my car is having same problems now

Did you fix yours ? Mine is having the same problem. My AC blows cold when moving and a bit warm at traffic when RPM drops

Dozieson:


Q
1. Is the car still misfiring
2. Have you scan the car?

Go and scan and stop wasting money on parts that you don't need

It’s working fine now , had a faulty Coil
Thanks all

J

Angrygoat:
Don't go and buy complete,you will regret it. Pls and pls buy just the pump,tokunbor highest 4 to 5k. Brand new China original 9k. Don't buy complete oh,u will regret it o. I don buy two complete still na error,I reverted back to factory and bought brand new pump from aliexpress. Its working fine and no more backfire or coughing or stalling at low speed. Pls just pump,either your coils amd spark plugs are going bad to..pls don't let mechanic scam u oh,ag been thr and done that.

Thanks
Tested with another pump and it was same thing . Scan revealed a bad coil . It was changed and it’s alright now . Thanks all for your suggestions . I appreciate �

jceesquare:


When you accelerate or at start-up (as described) the demand for fuel and air from your engine is high. If your car cannot supply either of the 2, it will result to power loose as you're experiencing. From your last scan showing Random multiple misfire; coupled with your explanation, you're definitely having a fuel delivery issue. A fuel pressure test would give you a clearer picture.

As I've suggested earlier, you will need to get a complete fuel assembly and not just the pump for peace of mind.

The oxygen sensor monitors the oxygen level in the exhaust system amongst other functions and would not make you have the symptoms you're experiencing with your car.

I’ll get the complete fuel pump replaced tomorrow
Thanks so much

Dozieson:


Scan again and share the codes. Codes will show the particular cylinder misfiring

I will scan this morning and give feedback
Thanks

jceesquare:

Change the complete fuel pump assembly and not just the pump. Change external filter if it has one. Try not to drive with quarter tank or low fuel for long.
I guess what happens is that your pump overheats after a while and starts misbehaving. The petrol in your tank acts as a coolant for the pump and when you run your car low on petrol the pump overheats.

I’ll run a scan on it today and give you feedback .
Here are my observations :
It hesitates from startup
And when it picks up , jerks inbtw ( not too noticeable) even d passenger near me wdnt notice it
But runs fine later
Only problem I have is startup and happens whenever I step on Gas

Feels like oxygen sensor is going bad ?

Dozieson:


Q
1. Is the car still misfiring
2. Have you scan the car?

Go and scan and stop wasting money on parts that you don't need

Still misfiring and last scan says multiple cylinder misfire
Also switches from one or two cylinder to another . It’s tiring

jceesquare:

Run a fuel pressure test when it starts misfiring. As suggested, scan the car for codes.
Also check the condition of your air filter and replace where necessary.

Not sure my mechanic has fuel pressure gauge , I’ll run a scan again . Last time I scanned it reads multiple cylinder misfires tho

Also changes misfire from on cylinder to another .

GAZZUZZ:


You didn't mention if you had any problems with the engine? Clear the code and rescan after 100km. Worst case senario replace all six spark plugs with original oem.

gazzuzz please I need help with my Camry 2003 V6 , I’ve changed all the plugs , coils and had my mechanic replace some nozzles but I still have misfire. It works fine when it’s cold but ones it’s warms up, hesitates to move from startup . Also changed the fuel pump

Yes it’s legit , I’m on the platform too
I’ll advise you start with any amount you can spare, when it grows u then take ur capital and continue trading with interest

How can I verify paxful address , I've verified ID , PHONE NUMBRR , IT won't take my Bank statement, and light bill. Pleasee help me