In these days many people suffer from muscle pain due to old age factor, accident, arthritis, and some kind of physical injuries. Further, even people who belongs or living in the cities, work for hour by sitting in the front of their computers, laptops etc. and they can’t manage to do exercise or physical work which is the main cause for muscle pain. Over weighted and pregnant also suffers from the muscle or body pain, in order to get relief from this uncertain pain many of people consider the physiotherapist and it works very well for you but the in case of emergency most of the people miss their important work.

Electronic massagers are very beneficial for many people. They are helpful in reducing pain and discomfort associated with sciatica, arthritis, muscular spasms, and lower back pain. They can also offer relief to individuals with soft tissue damage as a consequence of an accident, stroke or sporting injury. They are very cost effective and convenient, eliminating the need to frequently visit, (and pay), a physiotherapist or chiropractor. You can use them in the privacy and comfort of your own home while reading, working on your computer or watching television!

Muscle Re-Education and Atrophy Reduction

In cases where an injury has been incurred and an athlete must accelerate strengthening or off-set muscle atrophy, EMS can play an important role. This is very common when a joint injury occurs, the limb cannot be used and muscles are not being worked normally. A foot or ankle injury is a perfect example of this application. The EMS unit can be used to work quads, hamstrings, glutes and calves when the athlete cannot properly walk or run for the initial stages of rehabilitation. For the athlete that sprains their ankle or knee in the latter stages of their training cycle, EMS can help to maintain muscle strength until you are ready to resume conventional training.

FOR MORE INFO OR DEVICE DIRECTIVE CALL 08051707225

A two-way radio is a radio that can both
transmit and receive (a transceiver), unlike a
broadcast receiver which only receives
Walkie-talkies, as they were called, were first
developed for military use during World War
II and eventually spread to public and
commercial use after the war. They typically
look like a telephone handset with an
antenna sticking out the top with a built in
speaker that can be heard by the user and
anyone in close proximity.
Modern walkie talkies still utilize the push-
to-talk technology and are available in
numerous price ranges - from units sold as
toys to more commercial units used for
public safety, business or any setting where a
portable radio would be necessary. Some
walkie talkie models can be made to be very
small and depending on the differing use,
the equipment varies with consumer use and
commercial use.
5w two way radio cheap uhf
baofeng bf-888s two way radio
Quick Details
Place of Origin: Fujian China (Mainland)
Brand Name: baofang
Model Number: TD-V2
Type: Handheld
Dimensions: 117*52*33mm
Frequency
Range:
136-174MHz /
400-470MHz
Storage Channel: 16
Talk Range: 3-5KM
Mode of
operation: Simple or semi-duplex
Colour: Blackedlue
With LCD: Have
Battery Capactiy: 1500mAh
Warranty: 18 month
Weight: 250g
Type: Property Two-way radio
Output Power: UHF 3W
Battery Life: 14 hour
Keypad Lock: Yes
for more enquiry:08051707225
www.imakusvisiontech.com

ajeyomi4real:
Hello fellow this is watch for you at cheaper price,its has 8gb memory and water proof.the function its more than the price buy your own today.i located at ibadan oyo state.anywhere you want this watch it will get to you.you can call me to 07059596992
100%Brand new and high quality

Watch Style Hidden Device : Easy to Carry, Fashion Design.

Built-in Big Memory : It has 8GB of internal memory provides plenty of space to store all that surveillance.

High Resolution Video : 720*480 @ 30 FPS.

Water Proof

This DVR Spy Watch is a must have for all aspiring secret agents and comes loaded with features.
Specification


Item

Parameters
Video format

AVI
Video encoding

M-JPEG
Video resolution

720*480 VGA
Video frame rate

30fps
Media playing software

Attached software of the operating system or Mainstream audio and video media playing software
Picture format

JPG
Picture pixels

1280*1024 (5M Pix)
The ratio of image

4:3
Supporting system

Windows me/2000/xp/2003/vista O/S;Linux;
Battery capacity

200mAh
Working time

About 70 minutes
Charging voltage

DC-5V
Interface type

Φ2.5 4 Pin USB
Storage support

Nand flash
Battery type

high-capacity lithium polymer

Detail

What`s in the box

1 x Spy watch(8G)
1 X USB Cable
1 x Charge
1 x user Manual
1 x CD drive.

For spy camera eyeglass,watch and pen get it here www.imakusvisiontech.com at an affordable price.

I think such sudden removal of keshi at this point does not guarantee if super eagles will qualify for AFCON Cup of Nation
to receive further updates follow like this page https://www.facebook.com/uefafootballupdate

fun4:
The factional leader of the Nigeria Football
Federation has insisted the 'Big Boss' is still in
charge of the country's senior national team Factional president of the Nigeria Football
Federation, Chris Giwa has condemned the decision of the Amaju Pinnick-led NFF board to sack Super Eagles' caretaker coach Stephen Keshi and ordered his stay.

Keshi was relieved of his job as Super Eagles' coach by the Pinnick-led NFF on Thursday morning with Amodu Shuaibu named as replacement.

In a communiqué made available to Goal after its emergency meeting held at Bolingo hotel, Abuja, the Giwa-led NFF group insisted Keshi and his crew will remain in the interest of continuity and described the Pinnick-led board as illegal.

"The board resolved after hearing that some
people are parading themselves as the NFF board, decided to sack the technical crew of the Super Eagles at a very critical moment," the statement read.

"We condemn the act and hereby state that Stephen Keshi remains the head coach of the senior national team and the technical crew remains intact.

We condemn the acts of impostors parading
themselves as such.
.
www.goal.com/en-ng/news/4093/nigeria/2014/10/17/5208911/stephen-keshi-remains-eagles-coach-insists-chris-giwas-nff

Biometrics is the identification of people based upon their physical characteristics; most commonly their fingerprints, hands, eyes, or facial features. While time and attendance systems are used to manage employee attendance, scheduling, and associated payroll tasks.

Within time and attendance, biometric devices are often used as a punch clock in order to add an extra layer of security, accountability and efficiency.
How Does Biometric Time and Attendance Software Work?

Step 1: Biometric Devices: Using biometric time and attendance systems allows employees to clock in and out using their fingerprint, retinal scan, etc. Often times this process is also accompanied by a PIN (Personal Identification Number) which must also match the fingerprint or other scan.

Step 2: Time and Attendance Software: Pairing your biometric device with a time and attendance software allows for more efficient payroll and attendance processing. Rather than spending hours adding up manually submitted clock-in and clock-out times, your biometric time and attendance software will allow you to automatically import data into your payroll software. This will significantly cut down on processing time and will eliminate errors derived from manually inputting information.
Different Types of Biometric Devices

finger print scannerFingerprint Scanners are probably the most common type of biometric time and attendance device, simply because they are easy to use and are generally quite accurate (reputed 99% accuracy). (See end for availability)


hand punch scannerHand Punch Scanners record and store the 3D shape of an employee’s hand in order to compare and verify the individual. These biometric devices are generally more expensive than a fingerprint scanner, however they can be more accurate as they analyze more than just the fingerprint. (See end for availability)

retinal scannerRetinal Scanners use a technology that captures an image of eye patterns in order to compare them to previously recorded images. These systems are also quite accurate for time and attendance, however they can be harder to find, as fingerprint scanners are usually more common. (See end for availability)

voice scannerVoice Recognition Devices record a series of verbalized words and compares the patterns to previously recorded clips. The level of accuracy on voice recognition devices may sometimes be lower than fingerprint scanning, however they are often times quite accurate

For more Inquiry contact:jamesitalk@gmail.com
Phone:08051707225

GSM warning device is associate warning device that operative through GSM (global system for mobile communications) network; not requiring a phonephone line. merely insert a SIM card and push the battery switch to ON, it'll work by the mobile network. once the system discover intrusion, fire, or the other emergency, the sensors (eg. door sensor) or accessories (eg. panic button) can trigger the alarm, and therefore the GSM alarm can instantly motor vehicle dial one amongst 5 numbers that is pre-stored within the alarm, or send a brief message. The alarm can phone every range till a response is issued to prevent the alarm.
Fortunately, advancements in mobile phone technology have LED to the increase of GSM cellular home alarm systems, creating today’s security systems considerably more practical and sturdy. They’re conjointly that abundant more durable for a stealer to induce past to induce to you and your valuables.
A GSM cellular home warning device works during a fashion kind of like ancient systems, however with a twist. ancient systems have variety of sensors and/or cameras stationed around your house and property. once a window is opened, as an example, a sign is distributed across a wire to the system’s electrical device. The electrical device then would send a sign over your phonephone line to the alarm company.
Today, however, things square measure a trifle totally different. additionally to the cellular facet most of these access purpose sensors square measure currently wireless. meaning you don’t got to run a bunch of wiring everywhere your home simply to guard it. merely install the system and make certain to vary the batteries on those access points as required.
The big distinction, and therefore the one meaning the foremost to you, is that the portion of the system that sends the signal to the house security company currently depends on a cell signal rather than a conventional line to attach.
In fact, most cellular home alarm systems currently take things a step more. Not solely will the alarm signal travel the safety company via your mobile phone, however you will truly be ready to manage your system from your mobile phone. In some cases, you'll dial the system’s mobile phone range and obtain a voice menu of choices. In alternative cases, you'll truly manage your warning device from your smartphone.

Have Quqestion on this contact jamesitalk@gmail.com
No 08051707225.

Who are you what is your interest in this matter and I wonder what stuff your are made from

Rimbaldi: Did you not copy from here too? And here you were trying to sound smart.

http://www.symbianize.com/archive/index.php/t-621881.html. see full text below and judge for yourself

Balotskidot2nd Jan 2012 Mon, 21:10
want to help and give some points kaso ts dko gets un gusto nioa mangyari...

what im seeing is may rome camera ka and a dvr and you want to record the vid using the dvr and acces your dvr and/or the camera from the net just input the ip address of that dvr/camera to view the vid and at the same time you can view it realtime...tama po b??

try mo to ts..hope it helps..it really dpends sa model ng mga gadgets mo ha..


Setting up DVR to be used from remote location:
Connect your DVR to your router
Use menu on DVR to assign internal IP and gateway and port number.

This Local IP must be in the same Gateway range as the Router. If you are unsure check the Router and locate the Status section, or goto the Command prompt of Windows XP and type in ipconfig.

Look for Gateway. If the Gateway is 192.168.1.1, then you can make the DVR's IP anything from 192.168.1.2 - 192.168.1.255.

Also you will need to use the same SubNet Mask, which is typically 255.255.255.0, and also use the same gateway.
Next find out what port your DVR uses. The easiest way to it is by reading the manual of your DVR. Look for the network section of it.

Also if it comes with network software, check out if in the connection area the software shows the port number.

Also check the Server software/Programming (Network section of it) to see if the port is listed.

In many cases it will be as simple as just Port 80, which is an HTTP port.
Set your router to forward chosen port to internal IP address of DVR.

To access the Router itself, use the Gateway you just located. If the gateway is 192.168.1.1, then enter that into the location edit box of your browser and then click the Enter button. A username and a password are typically required, but it depends on a router. For Linksys use "admin", "admin". By default DLink doesn't require any username or password (It is highly recommended to change the default password).

Once you're logged into the Router, in the Applications & Gaming Section / Servers of the Router, you need to add a Server/Application. Enter the port number and select TCP only. Where it says Port 0 to 0 enter the same port number twice. Or if your DVR uses for example, ports 3550, 4550, 5550, 6550, and there is nothing else utilizing these ports in between, then you can actually just enter one line, 3550 - 6550.

Enter the DVR/Cameras internal IP.

Enable it.
Quote:
Originally Posted by Example
If the port was 1024, and the Local IP is 192.168.1.200, then it would be:

NAME = Anything you want
Port = 1024 TO 1024
TCP/UDP = TCP
LOCAL IP = 192.168.1.200
ENABLED = CHECKED

OR

NAME = Anything you want
Port = 3550 TO 6550
TCP/UDP = TCP
LOCAL IP = 192.168.1.200
ENABLED = CHECKED
Set up additional entries for as many ports the DVR uses, to the same local IP. Check your DVR manual and it's networking section for all additional ports required. Also check the DVR software itself.

If your router has enough free entries, you can seperate them. Use it like DVR_HTTP for the browser port, DVR_AUDIO for the audio port, etc.

If you are going to use VNC to a PC DVR, then you would need to set up port 5900, and perhaps call it VNC_DVR, for example.
You have a static IP so you don't need to use sevices like www.dyndns.org . You just enter your static IP and your router forwards packets to your DVR.

8g spy-N7,500
4g spy-N6,500
spy Car key holder-N-5000
spy watch-N18,000
" " Eyeglass-N23,000
Contact:jamesitalk@gmail.com no:08038948617

8g spy-N7,500
4g spy-N6,500
spy Car key holder-N-5000
spy watch-N18,000
" " Eyeglass-N23,000
Contact:jamesitalk@gmail.com no:08038948617

8g spy camera watch,pen DVR and IP video cameras at cheaper price call 08038948617.

High definition fashionable pen shaped digital video recorder
Adopts CMOS image sensor and pin-hole lense hides in ball pen
Outputs high definition pictures and high quality videos
Suitable for recording the process of executing the law for policeman
Collecting proof for lawyers
Gathering news for reporters
With Built-in 8GB memory, supports Micro SD/T-Flash card up to 16GB
Simple operation: "One button" operates
Easy to connect to PC and playback video on the computer
Video Format: AVI
Video Resolution: 640 x 480 @ 30fps
Image Format: JPEG
Image Resolution: 1280 x 1024 pixels
Battery Type: Built-in high capacity polymenr Li-ion battery
Charging Voltage: DC-5V

for more information visit
http://www.imakusvisiontech.com

8g spy camera Watch and pen at cheaper price call 08038948617.

Your Comment have no logical base and this is by no reason Plagiarism even the link you provided is invalid
have no relationship with my topic.Where are here to help each other rather than ill gotten mind of critics
lead us no where.You better shade more light to the forum topics.

Wants to connect your DVR to internet and high quality ip cameras to monitor your office and homes ,call 08038948617 email : jamesitalk@gmail.com

You can get affordable solid cctv and mobile phone supported ip camera to v
View your home and office activities wherever you are call 08038948617 or send us mail
At jamesitalk@gmail.com

Hi,for those of us that is asking whether is possible to connect your DVR/CCTV camera to Internet
via USB modem in there lap top.The answer is no You are trying to set up a VPN on an internal network? You must have a switch or router or modem or something somewhere? You are going to have a hard time keeping track of an IP address with a 4G stick.

Requirements:
1.Your Ethernet adapter or Router if you it branded router from network providers
they should assign your an IP.

3.USB modem if you want to make use of usb Internet access if the ISP allowed it.

4.DVR depend on the number of camera your are using if it 8 camere=8 channel DVR
16 camera=16 channel DVR etc

5.Networking Cable connector may be Cat 5.


How to connect your DVR with USB Mordem.

1. Buy GMS Modem (look like flashdisk)
2. Buy Router 3.75G

3. Plug GSM to Router,
4. ensure that the Modem can be detected, and Connected to Internet
5. Set your Router to forward yor DVR Port
6. Connect your DVR to your Router


Connecting your DVR to Internet:
Connect your DVR to your router
Use menu on DVR to assign internal IP and gateway and port number.

This Local IP must be in the same Gateway range as the Router. If you are unsure check the Router and locate the Status section, or goto the Command prompt of Windows XP and type in ipconfig.

Look for Gateway. If the Gateway is 192.168.1.1, then you can make the DVR's IP anything from 192.168.1.2 - 192.168.1.255. and ping the ip to know whether if there is any other one or application using it if there is find another number.


Also you will need to use the same SubNet Mask, which is typically 255.255.255.0, and also use the same gateway.
Next find out what port your DVR uses. The easiest way to it is by reading the manual of your DVR. Look for the network section of it.

Also if it comes with network software, check out if in the connection area the software shows the port number.

Also check the Server software/Programming (Network section of it) to see if the port is listed.

In many cases it will be as simple as just Port 80, which is an HTTP port.
Set your router to forward chosen port to internal IP address of DVR.

To access the Router itself, use the Gateway you just located. If the gateway is 192.168.1.1, then enter that into the location edit box of your browser and then click the Enter button. A username and a password are typically required, but it depends on a router. For Linksys use "admin", "admin". By default DLink doesn't require any username or password (It is highly recommended to change the default password).

Once you're logged into the Router, in the Applications & Gaming Section / Servers of the Router, you need to add a Server/Application. Enter the port number and select TCP only. Where it says Port 0 to 0 enter the same port number twice. Or if your DVR uses for example, ports 3550, 4550, 5550, 6550, and there is nothing else utilizing these ports in between, then you can actually just enter one line, 3550 - 6550.

Enter the DVR/Cameras internal IP.

Enable it.
Quote: Originally Posted by Example
If the port was 1024, and the Local IP is 192.168.1.200, then it would be:

NAME = Anything you want
Port = 1024 TO 1024
TCP/UDP = TCP
LOCAL IP = 192.168.1.200
ENABLED = CHECKED

OR

NAME = Anything you want
Port = 3550 TO 6550
TCP/UDP = TCP
LOCAL IP = 192.168.1.200
ENABLED = CHECKED

Set up additional entries for as many ports the DVR uses, to the same local IP. Check your DVR manual and it's networking section for all additional ports required. Also check the DVR software itself.

If your router has enough free entries, you can separate them. Use it like DVR_HTTP for the browser port, DVR_AUDIO for the audio port, etc.

If you are going to use VNC to a PC DVR, then you would need to set up port 5900, and perhaps call it VNC_DVR, for example.

so No you have successfully connected you DVR to Internet to view your residence or office from any part of the world Type the ip address of your DVR followed by port no eg,192.168.1.1:8080

that is all,If you Have any question do not Hesitate or recommendation on the typeof cameras and DVR to get suite the surveillance location of your home and offices and where to get them at reasonable amount:

Call us on +234 08038948617 or

Send us mail:Jamesitalk@gmail.com