It is possible that certain technical errors on your Brother Printer may prevent you from printing black color. You can refer to the steps listed below to solve the Brother Printer not printing black issue:
• Check if the “Breather Tape” is removed before installing the ink cartridge
• Be sure to install a new Brother Printer cartridge before the ink runs dry
• As far as possible use only genuine Brother Printer ink cartridges
• Keep the printer in a cool place preferably away from the window
If you find that your printer still does not print black even after implementing the solutions above, you can call the Brother Printer customer service number and ask for additional technical assistance.

If you find that you Brother Printer cannot detect the ink cartridge you can follow the steps given below to the cartridge and try and solve the problem:

Step 1: Turn the printer off, wait for a few minutes, then turn it back on
Step 2: Lift the printer lever on the left and open the cover
Step 3: Press the “Cancel” and “Print” buttons simultaneously
Step 4: Tap the “+” button and scroll down to the ink cartridge you want to reset, then press ‘Ok.’
If your Brother Printer does not detect the cartridge even after you reset it, you can call the Brother printer support and speak to a printer expert to troubleshoot the problem.

Brother Printer is considered as the most trusted solution for printing problems and delivers it promises by printing your papers at a greater extent. However, if you can longer take prints you may be getting worried and frustrated. There are several reasons that prevent your Brother printer from printing, some are mentioned below:

1. Make sure that your Brother printer is on and there are no other errors:

•Check the status LED and if it is not lit then your printer is not powered on. Now check for the wring and make sure it is clearly plugged in.
•Check the LEDs and verify if there are any error lights. In case you find any error in LEDs light, try to find the issue.

2. Make sure it is connected to a router or access point:

• Verify the connection of your Brother printer to the router or access point using the Ethernet cable.

There may be another reason causing troubles and to get the proper solution you can call at Brother Printer support. A complete experienced and professional team will mentor you.