DBlackCeazer:
I need a working Samsung Galaxy s4 panel. Quote me if you have one.

I have i9500 with bad screen everything else intact call me 0.80.30.67.57.46

wassade:


I have how much you want to pay ? (Lagos)

you gimme your rate. Let's chat send me WhatsApp my number is there

Hi guys any ONE with an icloud locked iPhone 5s. It's urgently needed flash or WhatsApp me on 080.30.67.57.46

Damix007:
Available. iPhone 5s. iCloud Activation Locked. Very neat. For parts. N23k

Hi Damix007 do you still have the icloud iPhone 5s if yes halla me on 080.30.67.57.46. Very urgent

how much and pictures

You can get a 24v40Amps charger at about 45k. Check on jiji there are some sellers there. Or call 08030675746 lemme help you search

You can get a 24v40Amps charger at about 45k. Check on jiji there are some sellers there. Or call lemme help you search

hodonuu:


This is your unlock code : 20864902

Wow I'm so grateful man @Hodonuu, the code worked like magic and my modem is unlocked now. Thanks a million bro

@Hodonuu kindly help unlock mine or gimme the code plus guidelines to unlock mine huawei E5372s-601 black
Imei: 862554023461141.
Thank you gimme your number I ll call you. Mine 08030675746

ok which of the XW+ do you have

Thanks Bro but I wanna do outright sale have an S6 Edge already

Neatly used Samsung Galaxy S5 up for grabs in Lagos. Whatsap 0.8.0.3.0.6.7.5.7.4.6

I currently seek highly technical individuals (Engineers) very vast in UPS, Inverter and Solar installation,repairs and maintenance not more than 35 years to work with me, also experienced technicians are welcomed.
Cleaners, experienced technical marketers and front desk staff are also needed.
To apply send your application via email using position applied for as subject, stating experience, not CV/Resume to support@idyllictechnologies.com. Please no attachments.
for Enquiries call 08122649744.

I want an iphone 6 to swap with either my galaxy s5 or iphone 5 ASAP, or for direct buy contact me via whatsapp or call 08030675746

can you sell yours to me mine is having charging problem or you buy mine screen and all call me on 08030675746

barnykiss:
I need a clean iphone 5 icloud phone,I need too change d screen and case of my phone after a car ran over its...qoute me if you have any for sales..need it's urgently

hello house. I seriously need your help. after buying spectranet WiFi barely a month they announce an increase in their tariff. I want to leave them for swift but the WiFi modem is locked to their network can't use another simply
here are the details of the modem
Huawei mobile WiFi 5372
model E5372s-601
imei 862554023461141

please help so I can come back online.
thanks all for your anticipated replies and contributions

still available

Up for grabs at an affordable price EATON EDX10KI UPS with batteries included. call or whatsapp 08030675746

how much last, is this ur pin 592D1A08. lemme have ur number

Please house who can unlock my Iphone 5 from icloud and the amount please it will be highly appreciated. thank you in advance

A lot is being talked about Solar panels, grid tied system, grid interactive system and off grid systems, PWM, MPPT Solar Charge Controllers.

What’s the Difference between MPPT and PWM? that's is our focus for today. I am motivated to write this because of an argument that I had yesterday with a man.

The charge controller is a key component of a solar power system and specifying the best one for the system requires some analysis. Below is a quick overview.

The two types of charge controllers most commonly used in today’s solar power systems are pulse width modulation (PWM) and maximum power point tracking (MPPT). Both adjust charging rates depending on the battery's charge level to allow charging closer to the battery’s maximum capacity as well as optionally monitor battery temperature to prevent overheating.

► Comparing the Two
If maximizing charging current were the only factor considered when specifying a solar controller, everyone would use an MPPT controller. But the two technologies are different, each with it’s own advantages. The decision depends on site conditions, system components, size of pv array and load, and finally the cost for a particular solar power system.

► Temperature Conditions
An MPPT controller is better suited for colder conditions. As solar module operating temperature goes down, the Vmp1 increases. That’s because the voltage of the solar panels operating at their peak power point at Standard Testing Conditions (STC is 25C°) is about 17V while the battery voltage is about 13.5V. The MPPT controller is able to capture the excess module voltage to charge the batteries. As a result, a MPPT controller in cool conditions can produce up to 20 – 25% more charging than a PWM controller.

In comparison, a PWM controller is unable to capture excess voltage because the pulse width modulation technology charges at the same voltage as the battery. However, when solar panels are deployed in warm or hot climates, their Vmp decreases, and the peak power point operates at a voltage that is closer to the voltage of a 12V battery. There is no excess voltage to be transferred to the battery making the MPPT controller unnecessary and negating the advantage of an MPPT over a PWM.

► Array to Load Ratio
In a scenario where the solar array is large relative to the power draw from the batteries by the load, the batteries will stay close to a full state of charge. A PWM controller is capable of efficiently maintaining the system without the added expense of an MPPT controller.

► Size of the System
Low power systems are better suited to a PWM controller because:

A PWM controller operates at a relatively constant harvesting efficiency regardless of the size of the array
A PWM controller is less expensive that a MPPT, so is a more economical choice for a small system
A MPPT controller is much less efficient in low power applications. Systems 170W or higher tickle the MPPT’s sweet spot

► Type of Solar Module
Stand-alone off-grid solar modules are typically 36-cell modules and are compatible with both PWM and MPPT technologies. Some grid-tie solar modules on the market today are not the traditional 36-cells modules that are used for off-grid power systems. For example, the voltage from a 60-cell 250W panel is too high for 12-Volt battery charging, and too low for 24-Volt battery charging. MPPT technology tracks the maximum power point (thus MPPT) of these less expensive grid-tie modules in order to charge the batteries, whereas PWM does not.

► Cost
MPPT controllers are typically more expensive than PWM’s but are more efficient under certain conditions, so they can produce more power with the same number of solar modules than a PWM controller. One must then analyze the site to verify that the MPPT can indeed perform more efficiently when used in that system’s given set of conditions.

When specifying one technology over the other, the cost of the controller becomes less important than the total cost of the system. To specify a controller technology simply based of cost, be sure to perform a close analysis of realized efficiencies, system operation, load and site conditions.

SUMMARY OF COMPARISON
PWM Charge Controller
PV array & battery voltages should match
Operates at battery voltage so it performs well in warm temperatures and when the battery is almost full,
Typically recommended for use in smaller systems where MPPT benefits are minimal

MPPT Charge Controller
PV array voltage can be higher than battery voltage.
Operates above battery voltage so it is can provide “boost” in cold temperatures and when the battery is low.
150W – 200W or higher to take advantage of MPPT benefits.
Enables the use of lower cost/grid-tie PV Modules helping bring down the overall PV system cost.
Off-Grid or Grid-Tie

At Idyllic Technologies, when we select one type of charge controller over another we assess its advantages in the overall system cost. The goal is to power a system efficiently and continuously while preserving the health of the battery bank. To learn more about the solar power systems we design and build, give us a call on 08030675746. www.idyllictechnologies.com

our office is at Olowora off Omole phase 2. They are new batteries

ceejay80s:

Where is ur office? Do u have them in stock already? How much for 100ah and what's the model? Full river has different models, the one I am using is HGL model,
Are they brand new or used?
Where's ur location

White Galaxy s5 sreen for sale 25k call or whatsapp 08030675746

I come today to discuss a very delicate issue which has always been the problem of Installers of Inverters and the End Users themselves.
Believe it or not your installation is as good as the battery you are using for the installation. often times people tell me that the heart of an installation is the Inverter/UPS but I always tell them that that is wrong. To me the heart of the installation is the Battery.
What is a battery, a white man once told me that battery is just Lead and Acid and that is basically true.
For every backup system (Solar UPS and Inverter), if your battery is not standard if you like spend millions in acquiring the inverter you will surely fall to square zero. little wonder when you visit some clients, they wont let you mention an inverter system before they condemn you because one installer who is ready to make quick cash has duped him by giving him batteries that are not good enough, sometimes used batteries.
In our society today what is erroneously reffered to as Inverter Battery is the 200AH battery(mind you we have two types of 200AH) one is rated for 200AH/10HR the other 200AH/20AH.I wont be going into details to explain these as that is a topic for another day and time.
I am promted to write this because of a discussion I had with a Client who returned Hes battery on the bases of warranty claim as it did not last more than 4 months. I decided to interact with him on the technical specifications of the inverter and he told me its a 2kVA inverter (mind you thats is a 1.4 inverter system) and has a charging current of 10Amps.
I shook my head and took him to the battery to show him the battery specifications, On top of the battery it is clearly written C/10. I took time to explain to him what that meant and brought out the battery brochure and we read together.
Many will argue here that the lower the current used in charging a battery the better, that, i do not dispute but do you have that time and fuel to charge at a low current(Amperage). Many installers will tell you a Xantrex inverter is a rugged inverter and batteries dont fail when used with these inverters, why you might ask and that is because it has a charger. That is why you see it labeled Inverter/Charger, same as some other good ones.
The point I am trying to make is that we take time to size our battery not only by the runtime required but also by the charging capacity of your inverter.If 10Amps go for the 100AH or 65AH. At Idyllic Technologies, the sole importer of FullRIver batteries, we always advice our customers on the best way to handle their batteries for longevity. Because the customer says he wants 24hours backup, you give him batteries but because of the huge cost of the inverter/charger that will handle such capacity, you see installers use 30Amps on a 16 battery(4*4) arrangement.
I will stop here to hear your comments in the meantime you can reach me via 08030675746 (Idyllic Technologies Limited) Be wise and let no one cheat you of your hard earned money

New white Galaxy S5 screen up for grabs at a cheap price call or whatsapp 08030675746

FullRiver is in Nigeria visit idyllic technologies limited. No. 2 moses ogungbeye street, olowora. 08030675746 quote author=chris81964 post=38104080]
What are you looking to accomplish? 2 V 6 V are you best bets. Flooded is my first choice and an AGM my second.
Brands that I buy Trojan Hoppecke. I was told by my US distributor to look at Fullriver. If you have coins Rolls Surrette. [/quote]