Kenboss's Posts
Nairaland Forum › Kenboss's Profile › Kenboss's Posts
 Career › Vacancy For It Students & Marketers In Geotechnical/engineering Firm by kenboss(op): 2:21am On Dec 15, 2016 |
VACANCY: VACANCY: VACANCY::: Vacancy exist @ Geoken Tech, the ideal candidate must be residing within the following location: Ikotun, Egbeda, Igando, cele-Egbe and its Environs 1. Qualification: OND/BSC (IT Student) with engineering /Geology/Geophysics background: Candidate must have his/her personal laptop. 2. Marketers (OND/SSCE----Background)---must be familiar with Lagos environment, posses good communication and marketing skills. Resumption Date: 9th, January 2017 Contact (Geokentech @ 08060360538, kengeotech@yahoo.com 26, Ikotun Idimu Road, college Bstop, Kazam Plaza, suite 15. |
| Career › Seismic Interpretation & Well Logging Using Petrel by kenboss(op): 1:08pm On Nov 28, 2016 |
Seismic Interpretation & Well Logging Training Using Petrel Geoken Tech offering subsidized Geoscience Training on Seismic and Petrophysical interpretation using PETREL Venue: 8, Omotayo Bello Close, Thomas Estate –Ajah, Lagos State. OR 26, Ikotun Rd, College Bustop, Suite 15, Kazam Plaza. COURSE MODULES •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using checkshot data. •Calculation of petrophysical parameters •Generation of various attributes maps •Identification of prospects. Time: 10am-2pm daily NB: The softwares shall be installed during the training for all participants. Cost: #40,000 For registration and enquiry contact 08060360538 Wassap ( 08060360538)
|
| Jobs/Vacancies › Seismic Interpretation & Well Logging Using Petrel by kenboss(op): 11:46am On Nov 23, 2016 |
Seismic Interpretation & Well Logging Training Using Petrel Geoken Tech offering subsidized Geoscience Training on Seismic and Petrophysical interpretation using PETREL Venue: 8, Omotayo Bello Close, Thomas Estate –Ajah, Lagos State. OR 26, Ikotun Rd, College Bustop, Suite 15, Kazam Plaza. COURSE MODULES •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using checkshot data. •Calculation of petrophysical parameters •Generation of various attributes maps •Identification of prospects. Date: 28th November – 31st November 2016. Time: 10am-2pm daily NB: The softwares shall be installed during the training for all participants. Cost: #40,000 For registration and enquiry contact 08060360538 Wassap ( 08060360538)
|
| NYSC › Nysc Engineering/science Graduates Take Note by kenboss(op): 3:24pm On Nov 15, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) & P&ID 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING 5. PIPING AND INSTRUMENTATION DESIGN (P&ID) 6. STAADPRO( STRCUTURAL DESIGN & RC BUILDING N.B: Software’s/EBooks’ will be given to participant. Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist. CONTACT: (08060360538, 09084881939) Email:kengeotech@yahoo.com www.geokentech.com/training VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos. Outlet: 26, Ikotun Road, College Bustop, Kazam Plaza( Ikotun- Lagos) Participant should send names, Phone nos, & course of interest to the above Numbers & Email 1 Share
|
| Certification And Training Adverts › Autocad.pdms, Petrel, P&id Training In Lagosi( Reg In Progress) by kenboss(op): 2:35pm On Nov 12, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. IKOTUN CENTRE: 26, IKOTUN RD, COLLEGE BSTOP, BY DIAMOND BNK N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Geotechnical/geophysical Survey Training In Lagos by kenboss(op): 4:05pm On Nov 09, 2016 |
GEOTECHNICAL/GEOPHYSICAL SURVEY TRAINING Geoken Engineering services, is a involve in geotechnical study, Drilling, material and soil Investigation, Piling and Foundation Engineering. We undergo training for participant seeking An in-depth knowledge in the following Geotechnical/Geophysical areas: 1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case Study. 1. Sieve Analysis 2. CPT (Cone penetration Test), SPT (Standard penetration test) 3. Triaxial testing 4. Bearing Capacity Test. 5. Borehole drilling and Geophysical survey. 3. Geophysical/ Reservoir Analysis: (Petrel software application) for reservoir characterization and Estimation. 4. Geophysical Survey (Resistivity, Seismic)- Data acquisition, Processing and Interpretation Relevant software’s (Geotechnical and Geophysical) will be use for data Processing WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students, Geotechnical survey Engineers, Engineers, Hydrographers, Surveyors, IT student Interested Participant are to send number, Prefer location ( IKotun/AJAH), Names to 08060360538, kengeotech@yahoo.com TRAIINING FEE: #50,000 TRAINING DATE: 21ST NOVEMBER, 2015(CLASS ROOM & FIELD BASE) Email: kengeotech@yahoo.com www.geokentech.com 08060360538, 08028553955 Contact: 26, Ikotun Road, Beside Diamond Bank, Suite, 15, Kazam Plaza, College Bustop, Ikotun, Lagos. OR 8, Omotayo Bello Street, Thomas,Ajah, Lagos.
|
| Jobs/Vacancies › Geotechnical/geophysical Survey Training In Lagos by kenboss(op): 4:09pm On Nov 08, 2016 |
GEOTECHNICAL/GEOPHYSICAL SURVEY TRAINING Geoken Engineering services, is a involve in geotechnical study, Drilling, material and soil Investigation, Piling and Foundation Engineering. We undergo training for participant seeking An in-depth knowledge in the following Geotechnical/Geophysical areas: 1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case Study. 1. Sieve Analysis 2. CPT (Cone penetration Test), SPT (Standard penetration test) 3. Triaxial testing 4. Bearing Capacity Test. 5. Borehole drilling and Geophysical survey. 2. Foundation Engineering: A. Pile integration testing and Pile construction B. Pile load test 3. Geophysical/ Reservoir Analysis: (Petrel software application) for reservoir characterization and Estimation. 4. Geophysical Survey ( Resistivity, Seismic)- Data acquisition, Processing and Interpretation WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students, Geotechnical survey Engineers, Engineers, Hydrographers, Surveyors, IT students Email: kengeotech@yahoo.com www.geokentech.com 08060360538, 08028553955 Contact: 26, Ikotun Road, Beside Diamond Bank, Suite, 15, Kazam Plaza, College Bustop, Ikotun, Lagos. Or, 8, Omotayo Bello Street, Thomas,Ajah, Lagos.
|
| Certification And Training Adverts › Oil & Gas Software Training In Ajah/lekki( Cad, Pdms, Petrel) Weekends by kenboss(op): 11:41am On Nov 07, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN AJAH/LEKKI(WEEKENDS) Geoken Tech is offering Weekends Training on the following Software Application 1. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) 2. AUTOCAD 2D/3D( DRAFTING & MODELING) 3. PETREL ( SEISMIC & WELL LOGGING) N.B: Software’s/EBooks’ will be given to participant. Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Petroleum/Reservoir Engineers, Physics graduate/Undergraduates. • This training will benefit graduates seeking for jobs in oil & gas, Manufacturing, Engineering design industries. • Peoples working that need career development. • 1. AUTOCAD COURSE CONTENT: • Introduction AutoCAD 2D Toolbar (draw, Modify, Object snap, Properties, Status, Command. • Setting AutoCAD AD workspace ( drawing Limits) • Applying AutoCAD tools for design/drafting • Dimensioning, Dimensional style • Introduction to AutoCAD 3D Toolbar( Solid Editing, Modeling, View, Style) • AutoCAD 3D Tools Application • 2. PLANT DESIGN MANAGEMENT SYSTEM (PDMS) MODULES • Overview of PDMS( PIPING & EQUIPMENTS) • Picking position Explicit of Equipment in the GAD • Equipment modules and Tab • Designing of Equipments ( Pumps, Heat Exchangers, Vessels, Columns) using PRIMITIVE • Model editor for Equipments • Creating Piping Modules • Piping Workspace/Setting( Head/Tail) • Creating Pipe Fittings (Elbows, Valves, Tee, Reducer, Flange, and Gasket) etc. • PETREL ( SEISMIC & WELL LOGGING) • Introduction to Petrel Schlumberger, Petrel Workspace • Setting coordinate/Units in Petrel • Data Importation ( Seismic, Well, Fault datas) • Synthetic Seismogram • Well heads, Deviation, Well logs • Well correlation. VENUE: 8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, AJAH-LAGOS Email: kengeotech@yahoo.com (08060360538, 08028553955) DATE OF TRAINING (Saturday & Sunday (19th/20th), 26th /27th). General summary of training, Certificate (3rd Dec, 2016) Training Fee: # 20,000 per Course Participant should send names, Phone nos, & course of interest to the above Numbers & Email
|
| Career › Proposal To Train Oil/gas & Engineering Design Staff by kenboss(op): 4:15pm On Oct 18, 2016 |
PROPOSAL TO TRAIN OIL/GAS & ENGINEERING DESIGN STAFF GeokenTech services 8, Omotayo Bello Close, Thomas Estate, Ajah- Lagos +2348060360538 www.geokentech.com/training kengeotech@yahoo.com GeokenTech Services Company hereby submit proposal for training graduate Engineers, Pure and applied science personal in your organization in the following Oil/gas & Engineering design software application: Course Specification: COURSE DISCIPLINE 1 AUTOCAD (2D/3D) MECHANICAL, ELECTRICAL, MATERIAL & METTALLURGICAL ENGINEERS/TRAINEE 2 PIPING DESIGN (PDMS) MECHANICAL, CHEMICAL, PROCESS ENGINEERS/TRAINEES 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) PROCESS, CHEMICAL ENGINEERS/TRAINEES 4 RESERVOIR MODELING & WELL LOGGING(PETREL) GEOLOGIST, RESERVOIR ENGINEERS, GEOPHYSICIST, WELLSITE GEOLOGIST/GRADUATE TRAINEES 5 PIPING &INSTRUMENTATION DESIGN (P&ID) MECHANICAL, PROCESS, ELECTRICAL/INSTRUMENTAION ENGINEERS/GRADUATE TRAINEE Below are course modules for each of the courses above: PIPING DESIGN & EQUIPMENT(PDMS): Course Schedule Title: AVEVA PDMS (Equipment & Pipework) Course Code: APT-01 Overview: This course is designed for equip participants in using the various tools and components in designing and modeling equipment’s in 3D view. Course Outline • Overview of PDMS • Equipment workspace review • Equipment Hierarchy overview • Equipment Module & Tabs • Primitives • P-Points • Negative Primitives • Equipment Modeling Options • Model Editor for Equipment • Creating Nozzles • Obstruction Volumes • Create Equipment using Templates • Overview of PDMS • Piping workspace & Hierarchy overview • Overview of Piping Specifications • Piping Settings • Pipe creation form • Model Editor & Settings • Head & Tail attributes • Isometrics • Changing Specifications • Forwards & Backwards mode • Piping Assemblies • Positioning functions • Splitting & Merging Pipes • Rotating Tool • Data Consistency e AUTOCAD (2D/3D) Course Schedule Title: Engineering Design, Drafting & Modeling Overview: The course is design for student to have indepth knowledge to Emgineering design and Procurement • Introduction to Autocad 2d Toolsbar • Application of Tools bar( draw, modify, object snap, Properties, Status,Command) • Setting Autocad drawing Limits • Using Autocad tools to draw circles, Polygon, Eclispe, Rectangle etc • Modifying Autocad outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with Autocad 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects FIG 2: AUTOCAD DRAFTING & DESIGN FIG 3: CONVERTING AN ISOMETRIC DRAWING TO 3D MODELING 3. PETREL (RESERVOIR-SEISMIC – WELL SIMULATION) COURSE MODULE 1. Introduction to Seismic Interpretation 2. Data Importation: Importing seismic and well data 3. Synthetic Seismogram 4. Picking Horizon and Surface on seismic section 5. Importing well datas ( Well heads, deviation, Logs) 6. Correlating wells SEISMIC SECTION SHOWING FAULTS ( FIG:4) WELL LOG CORRELATION USING PETREL (FIG 5) 4. PROCESS DESIGN & OPTIMIZATION (HYSYS) (1) * Creating a New Simulation * Fluid Package, Designing basic Equiupments ( Pumps, Compressor, Heat Exchangers, Flash Seperator, Reactor, Absorber, LNG( Seperation Columns), Atmospheric crude Tower, etc. TUTORIALS: (a) Process involving reactions and seperations (b) Process involving recycling (c) Ethylene Oxide DYNAMIC SIMULATION Dynamic Simulation predicts how a process and its associate control system will respond to Various disturbances as a function of time • Flash Seperator • Gas processing • Refining • Chemicals ( Production of Propylene glycol from propylene oxide and water TRANSITION FROM STEADY STATE TO DYNAMIC MODEL STEADY STATE MODEL • Initial Model input • Thermodynamics • Components • Unit Operations • Flow Sheet construction DYNAMIC STATE MODEL • Additional Input • Pressure – Flow specification • Equipment Sizing • Controllers • Optimization ( Changing variables, Molar or Mass flow to get optimum produt or output)
|
| Career › Autocad.pdms, Petrel, P&id Training In Ajah, Lekki/ajah( Reg In Progress) by kenboss(op): 10:02am On Oct 17, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available. 1 Like 1 Share
|
| Career › Oil & Gas Softwares & Training Materials Available In Lagos, Ph, Abuja,warri, by kenboss(op): 1:52pm On Oct 11, 2016 |
OIL & GAS SOFTWARES & TRAINING MATERIALS AVAILABLE IN LAGOS, PH, ABUJA,WARRI, ETC THE FOLLOWING OIL & GAS SOFTWARE ARE AVAILABLE IN ANY PART OF THE COUNTRY 1. AUTOCAD (32/64BITS) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) 3. AUTOCAD P&ID( PIPING & INSTRUMENTATION SOFTWARE) 4. HYSYS(PROCESS DESIGN & OPTIMIZATION 5. STAADPRO ( STRUCTURAL DESIGN & REINFORNCEMENT SOFTWARE) 6. PETREL(SEISMIC RESERVOIR MODELING) 7. WINRESIST/IPIN2( GROUNDWATER EXPLORATION-GEOPHYSICAL SURVEY) 8. DRILLING, PETROPHYSIC, WELL LOGGING MANUALS & MATERIALS N.B: 1, 2, 3-------FOR MECHANICAL, CIVIL, MATERIAL & MATTERLLURGICAL ENGINEERS, PURE/APPLIED SCIENCE 2, 3, 4-----------------CHEMICAL, PROCESS ENGINEERS, CHEMISTRY GRADUATES 1, 5---------------------FOR CIVIL, STRUCTURAL ENGINEERS 6, 7, 8--------------------FOR GEOLOGIST, GEOPHYSICIST, PETROLEUM, RESERVOIR ENGINEERS, UNDERGRADUATES. THE COST OF THE SOFTWARE & TRAINING MANUALS IS #5,000 FOR INDIVIDUALS RESIDING OUTSIDE LAGOS DUE TO COST OF SHIPMENT TO LOCATION #3,000 FOR THOSE IN LOCATION, BY COMING TO OUR LAGOS OFFICE @ 8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, AJAH OR, 26, IKOTUN RD, COLLEGE BSTOP, SUIT 15, KAZAM PLAZA, BY DIAMOND BANK. GEOKENTECH (08060360538, 08028553955) kengeotech@yahoo.com
|
| Career › Oil & Gas Training Courses In Lekki/ajah 4 Graduate Engineers by kenboss(op): 1:23am On Oct 10, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Properties › A Room Self Contain 4 Rent @ Thomas Estate, Ajah-lagos by kenboss(op): 2:06pm On Oct 08, 2016 |
A ROOM SELF CONTAIN IS AVAILABLE FOR RENT: LOCATION: THOMAS ESTATE, AJAH LAGOS, BY ABRAHAM ADESANYA RD FACILITIES: WATER RUNNING, FACE WITH GATE, FLOOR & WALL TILED KITCHEN EQUIPED WITH CABINET, TOILET FULLY TILE. CONTACT: MR KENNETH (08060360538, 08028553955) LANDLORD PRICE: #220,000.00 (Two Hundred and Twenty Thousand naira) |
| Career › Oil & Gas Softwares & Training Materials Available In Lagos, Ph, Abuja,warri, by kenboss(op): 11:44am On Oct 05, 2016 |
OIL & GAS SOFTWARES & TRAINING MATERIALS AVAILABLE IN LAGOS, PH, ABUJA,WARRI, ETC THE FOLLOWING OIL & GAS SOFTWARE ARE AVAILABLE IN ANY PART OF THE COUNTRY 1. AUTOCAD (32/64BITS) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) 3. AUTOCAD P&ID( PIPING & INSTRUMENTATION SOFTWARE) 4. HYSYS(PROCESS DESIGN & OPTIMIZATION 5. STAADPRO ( STRUCTURAL DESIGN & REINFORNCEMENT SOFTWARE) 6. PETREL(SEISMIC RESERVOIR MODELING) 7. WINRESIST/IPIN2( GROUNDWATER EXPLORATION-GEOPHYSICAL SURVEY) 8. DRILLING, PETROPHYSIC, WELL LOGGING MANUALS & MATERIALS N.B: 1, 2, 3-------FOR MECHANICAL, CIVIL, MATERIAL & MATTERLLURGICAL ENGINEERS, PURE/APPLIED SCIENCE 2, 3, 4-----------------CHEMICAL, PROCESS ENGINEERS, CHEMISTRY GRADUATES 1, 5---------------------FOR CIVIL, STRUCTURAL ENGINEERS 6, 7, 8--------------------FOR GEOLOGIST, GEOPHYSICIST, PETROLEUM, RESERVOIR ENGINEERS, UNDERGRADUATES. THE COST OF THE SOFTWARE & TRAINING MANUALS IS #5,000 FOR INDIVIDUALS RESIDING OUTSIDE LAGOS DUE TO COST OF SHIPMENT TO LOCATION #3,000 FOR THOSE IN LOCATION, BY COMING TO OUR LAGOS OFFICE @ 8, OMOTAYO BELLO CLOSE, THOMAS ESTATE, AJAH OR, 26, IKOTUN RD, COLLEGE BSTOP, SUIT 15, KAZAM PLAZA, BY DIAMOND BANK. GEOKENTECH (08060360538, 08028553955) kengeotech@yahoo.com
|
| Career › Oil & Gas Software Training In Ajah, Lekki 4 Engineers, Graduate by kenboss(op): 10:22am On Oct 03, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| NYSC › Oil & Gas Software Training In Lagos For Nysc Members by kenboss(op): 5:37pm On Sep 26, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Starting Date: Monday ( 19th September, 2016) Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Oil & Gas Training In Ikotun, Egbeda, Ikeja & Its Environs by kenboss(op): 10:47am On Sep 23, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) & P&ID 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING 5. PIPING AND INSTRUMENTATION DESIGN (P&ID) 6. STAADPRO( STRCUTURAL DESIGN & RC BUILDING N.B: Software’s/EBooks’ will be given to participant. Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist. Training for September start on Monday (26th Sep, 2016) CONTACT: (08060360538, 09084881939) Email:kengeotech@yahoo.com www.geokentech.com/training VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos. Outlet: 26, Ikotun Road, College Bustop, Kazam Plaza( Ikotun- Lagos) Participant should send names, Phone nos, & course of interest to the above Numbers & Email
|
| Career › Oil & Gas Training Courses In Lekki/ajah 4 Graduate Engineers by kenboss(op): 10:12am On Sep 19, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Starting Date: Monday ( 19th September, 2016) Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Oil & Gas Training Courses In Lekki/ajah 4 Graduate Engineers by kenboss(op): 10:04am On Sep 19, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Starting Date: Monday ( 19th September, 2016) Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Oil & Gas Training Courses In Lekki/ajah by kenboss(op): 4:03pm On Sep 14, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. PETREL (RESERVIOR MODELING/SEISMIC INTERPRETATION) Modules: Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation, well log correlation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Starting Date: Monday ( 19th September, 2016) Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Career › Design, Piping, Reservoir & Seismic Software Training In Lagos( Starts, Sep, 5th by kenboss(op): 4:44pm On Aug 23, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) & P&ID 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING 5. PIPING AND INSTRUMENTATION DESIGN (P&ID) 6. STAADPRO( STRCUTURAL DESIGN & RC BUILDING N.B: Software’s/EBooks’ will be given to participant. Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist. Training for September start on Monday (5th Sep, 2016) CONTACT: (08060360538, 09084881939) Email:kengeotech@yahoo.com www.geokentech.com/training VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos. Outlet: 26, Ikotun Road, College Bustop, Kazam Plaza( Ikotun- Lagos) Participant should send names, Phone nos, & course of interest to the above Numbers & Email
|
| Certification And Training Adverts › Autocad.pdms, Petrel,hysys P&id Training In Lagosi( Aug, 2016) by kenboss(op): 2:50pm On Aug 09, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) & P&ID 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING 5. PIPING AND INSTRUMENTATION DESIGN (P&ID) 6. STAADPRO( STRCUTURAL DESIGN & RC BUILDING Starting date: 17th, August, 2016 N.B: Software’s/EBooks’ will be given to participant. Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist. CONTACT: (08060360538, 09084881939) Email:kengeotech@yahoo.com www.geokentech.com/training VENUE: 8, Omotayo Bello Close, Thomas Estate, Lekki/Ajah- Lagos. Outlet: 26, Ikotun Road, College Bustop, Kazam Plaza( Ikotun- Lagos) Participant should send names, Phone nos, & course of interest to the above Numbers & Email
|
| Career › Design, Piping, Reservoir & Seismic Software Training In Lagos by kenboss(op): 11:02am On Aug 04, 2016 |
OIL & GAS SOFTWARE APPLICATION TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM) & P&ID 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING 5. STAADPRO( STRCUTURAL DESIGN & RC BUILDING N.B: Software’s/EBooks’ will be given to participant. DATE: 8TH AUGUST, 2016 CONTACT: (08060360538, 09084881939) Email:kengeotech@yahoo.com www.geokentech.com/training VENUE: 26, IKOTUN ROAD, BY DIAMOND BANK, KAZAM PLAZA (SUIT 15) COLLEGE BSTOP. Participant should send names, Phone nos, & course of interest to the above Numbers & Email
|
| Career › Autocad.pdms, Petrel, P&id Training In Ajah, Lekki( Reg In Progress) by kenboss(op): 8:09am On Jul 30, 2016 |
OIL & GAS TRAINING COURSES IN AJAH/LEKKI A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Business › Soil Testing, Borehole Drilling, Piling (geoken Tech Profile) by kenboss(op): 5:02pm On Jul 27, 2016 |
GEOKEN TECH & INVEST COMPANY LIMITED (Geotechnics, Borehole drilling, Geophysical Survey Piling, & Design) CONTENTS: 1. INTRODUCTION 2. BUSINESS INTEREST 3. PROFESSIONAL EXPERIENCE 4. PAST PROJECTS IN PICTURE GENERAL INTRODUCTION: GeokenTech Nigeria Invest & Company Ltd was registered by the Cooperate affairs Commission under the company Act ---------. Office Address: 8, Omotayo Close, Thomas Estate, Ajah - Lagos Branch Office: 26, Ikotun Road, (Suit 15, Kazam Plaza) College Bustop, By Diamond Bank, Ikotun-Lagos. Office Tel: +2348060360538, +2348028553955 Email: kengeotech@yahoo.com Website: www.geokentech.com As Geotechnical Engineers our lists of services are: 1. ENGINEERING SUBSOIL INVESTIGATION These are fundamental importance for the continued stability of engineering structures such as private or industrial building, roads, highways, bridges, jetty and dams etc. 2. GEOPHYSICAL/GEOLOGICAL INVESTIGATION Using our geophysical sounding technique and other methods, we undertake investigation to reveal ground water accumulation, delineation of salt/fresh water interface, delineation of strata, and search for mineral resources of an area including well logging. We also carry out above water studies for dredging and other related purpose. 3. FOUNDATION ENGINEERING On sites, which have very weak soils to significant depth, piles are the engineering Devices, which allow the construction of building, offshore towers, bridges and roads to be made without fear of failure 3B: Pile Integrity Testing To ascertain the structural integrity of Piles i.e the depth of termination of piles, Homogeneity and the symmetry of the installed piles, we carry out pile integrity Testing with the latest PIT equipment and run through available software 3C: Pile Load Test The most effective method of determine the pile load capacity and settlement of Either driven or bored pile is by a pile load test. 4. DRILLING OF BOREHOLES We undertake the drilling and completion of water boreholes for interested persons and organization consequent however upon proof that there is a dependable ground water aquifer in a client's site. We have been in the drilling and geophysical survey business for over ten years and our track records are indispensable. We have experts in well design, borehole wall development, flushing and well completion. 5. WATER & WASTE TREATMENT PLANT We are interested in the above and carry this out based on the size of a client's need. 6. CONSTRUCTION OF GROUND & OVER HEAD TANK AND RESERVOIR We also undertake the above usually based on the client's need and demand, using steel or concrete for the construction. We have experts who can also give advisory supports in the construction of reservoirs, whether for oil or water storage. 7. DETAIL ENGINEERING DESIGN OF PROCESS PLANT WITH CADD, PDMS Our design Engineers use engineering software’s ( AutoCAD, PDMS) for plant design and modeling, storage tank and scaffolding design. MISSION STATEMENT: To be one of the leading geotechnics and foundation engineering company by Providing effective solution to all geotechnical problems. We hope to achieve this with excellence in our professional operation, superior financial performance, promoting highest ethical standard that guarantee quality that will satisfy our clients. OVERVIEWED OF WORKS EXECUTED AND SUPERVISED BY GEOKENTECH 1. Client---- CMO, Catholic Church, Ago-Palace Way, Okota, Lagos Depth: Borehole Test (SPT) ----30 metres Description: Soil investigation study Year: 2016 2. Client--- Kings College, Victoria Island Depth: Borehole drilling ---- 200 metres (deep well) Description: To delineate Fresh/Salt water intrusion Year: 2015 3. Sub surface investigation study at Abraham Adesanya, Ajah- Lagos Depth: Borehole test (SPT) -----30 metres 4. Geophysical Survey ( Resistivity) to determine Aquifer overburden thickness at Lekki- Ajah Year: 2015 5. Pile Integrity Test (P.I.T) P.I.T on 15nos. piles for proposed development at Apapa Oshodi Express Way,Lagos LIST OF EQUIPMENTS 1. ABEM TERRAMETER SAS 300C 2. COMPRESSOR 3. PIPES LENGTH GEOTECHNICS/FOUNDATION 1. .2.5Tons Capacity Penetrometer Machine 2. Hand Rig FIGURE 1.0—Cone Tone Penetrometer for Subsoil investigation FIGURE 2.0: Detecting pile integrity (Pile integrity test) FIGURE: Percussion Drilling Rig ( SPT Investigation of Subsoil) |
| Career › Autocad.pdms, Petrel, P&id Training In Ajah, Lekki/ajah( Reg In Progress) by kenboss(op): 12:04pm On Jul 25, 2016 |
OIL & GAS TRAINING COURSES IN AJAH A. AUTOCAD • 2D Orthographic Draft • 2D Isometric Draft • 3D Modeling • Piping General Arrangement Drafting (Drafting to scale with the use of pipe data) • Piping Isometric Drafting------- B. STRUCTURAL AND ARCHITECTRUAL DESIGN( STAADPRO) • Structural elements (Columns, Beams, Slab and Foundation) • Stair and Staircase, roofing, sectioning, Plan and Elevation. Target Audience: Civil, Builders, Structural Engineers, Jobseekers C.PDMS (Plant Design Management System) = MECHANICAL /PIPING DESIGN • Equipment Modeling • Piping Modeling (Spooling and Routing), Pipe fittings (Elbow, Valves, Tee, Flanges) routing. • Structural Modeling • Piping Isodraft • Equipment Draft Target Audience: Mechanical, Process, Civil, Piping Engineers, Graduates, Jobseekers D. Aspen HYSYS (Process Modeling and Simulation) • Getting started with Hysys (Process modeling) • Defining fluid package • Installing stream utilities • Customizing Hysys workbook • Oil characterization • Process optimization • Gas gathering • Process optimization Target Audience: Process, Chemical, Instrumentation Engineers, Jobseekers • E. PIPING AND INSTRUMENTATION DESIGN (P&ID) • Process flow diagram design and interpretation • Assigning tags, control instruments to process equipment • Detecting errors on flow line, using software(validation) • Assigning specification to process lines Target Audience: Electrical, Mechanical, Instrumentation & control Engineers F. BENTLEY AUTOPLANT (CAD 3DPLANT) • Introduction to AutoCAD 3D Plant • Create and configure a project • Create and modify a 3D Plant modeling • Pipes, Equipment and Structural modeling and modification • Migrate project and drawing Target Audience: Design/Piping Engineers G. PETREL (RESERVIOR MODELING/PETROPHYSICAL CHARACTERIZATION) Data Import Seismic Interpretation (Seismic layers, horizon) Importing Seismic data into project Importing well datas( Well heads, well logs, well deviation) Fault Modeling (Geomodeling, Structural modeling) Gridding Layering Petro physical Modeling (Porosity, Facies, Permeability, water Saturation) using petrelsoftware application. Volume Calculation. Target Audience: Geologist, Geophysicists, Mining, Petroleum Engineers, Reservoir Analyst, and other professionals Contact: Ken Technologies on (08060360538, 08028553955). kengeotech@yahoo.com www.geokentech.com/training Training centres: 1. Ajah( 8, Omotayo Bello Street, Thomas Estate) By Doren Hospital, Through Abraham Adesanya Rd. N:B: All necessary training materials and take home available 2. Engineering design/Piping, Structural videos & EBooks available.
|
| Jobs/Vacancies › Ond/it Student & Marketers Needed by kenboss(op): 2:16pm On Jul 21, 2016 |
VACANCY: VACANCY: VACANCY::: Vacancy exist @ Geoken Tech, the ideal candidate must be residing within the following location: Ikotun, Egbeda, Igando, cele-Egbe Qualification: OND/IT Student (with engineering background) Candidate must have his/her personal laptop. 2. Marketers (OND/SSCE----Background)---must be familiar with Lagos environment, posses good communication and marketing skills. Contact( Geokentech @ 08060360538, kengeotech@yahoo.com 26, Ikotun Idimu Road, college Bstop, Kazam Plaza, suite 15. |
