₦airaland Forum

GEOKEN ENGINEERING SERVICES

Drilling, Geophysical /Geotechnical Services


26, Ikotun/ Idimu Roa, Suite 15,
kasam Plaza, Beside Diamond Bank Ikotun Lagos
Tel: 08028553555, 08060360538
Email: kento2002ng@yahoo.com

COMPANY PROFILE:

Geoken Engineering Service is a company equipped with state of the art facilities. Our experience and commitment over the years to project has always been our strength while maintaining client’s precision and satisfaction.
The services offered by us include:
Geotechnical Investigation Services (Geotechnical Investigation by core drilling)
Environmental Geophysics- Hydrocarbon pollution of hydrogen water
Environmental impact assessment projects.
Overburden thickness in a dump site and related matters
ENGINEERING GEOPHYSICS:
We complement civil engineers and architecture in order to deliver better services in any form of construction works by cordially initial investigation on site to determine soil substance. Our area of specialty includes:
Material test for road
Piezometers survey
Detection of buried objects.

EXPLORATION GEOPHYSICS:
From the believe that water is a scarce commodity that jealously guided
. The whole earth is covered with water only 25% is available for drinking. We undertake several forms of investigation to determine water for life. Our areas of interest in geophysical Exploration include:
1. Ground water investigation
2. Pollution of soil and ground water
3. Ground water flow.
BOREHOLE DRILLING/ LOGGING:
Borehole of various dimensions ranging from domestic and industrial are our specialty. Carrying out well completion and development is also our area of interest.

In any case of uncertainty in the production of well, we log our well to determine the status of the well, to determine its yield before casing. We equally offer these services to other company that need this services.

Water Distribution: we create network of mutuality of pipeline to read and distribute water to designated target by using the service of our renowned plumber

Overhead tanks construction: we design overhead tanks of various specification and capacity to take of our perspective clients

CLIENTELE:
Our expertise in successfully handling demands of Geotechnical Investigation and Core Drilling Services has assisted us in gaining support from many quality conscious clients. Furthermore, the compressively priced services as well as capability to deliver end results as per the requirement of our clients has also helped us in as a leading player in our industry sector.

PDMS (PLANT DESIGN MANAGEMENT TRAINING) – DECEMBER BATCH
Ken Technologies offer a range of Engineering Design courses in our Lagos office, mainly
Engineering Design and Process Software use by Oil/Gas and Engineering Companies, ranging
From basic level to more advanced level covering design, processing and Interpretation to
Greater depth.
We are Please to inform Engineers, graduate, Youth Coopers that Detail trainee on PDMS is in
Progress in our Design centre.
Prerequisites: The participants must have completed the Basics and Functions Course.
Course Structure: Training will consists of oral and Visual representation, demonstration and
Set exercises. This will be use by trainees to practice their methods and complete the set exercises.

COURSE MODULE
• Axis System (Piping Isometric):
• Identification of Equipment and Primitives ( Equipment and Primitives orientation)
• Creating of Equipments (Tanks, Reboiler, Heat exchanger, Column, Pumps)
• Modifying Equipment( Orientate, offset, move)
• Setting Attributes ( Height, Diameter, Position, orientation)
PIPEWORK MODELLING
Piping in PDMS: Basic Concepts
* Piping Specification: Setting the appropriate specification
* Pipe work tool bar
* Pipe creation Form
* Pipe Branch Head and Tail connected
* Creating Branch components (Pipe fittings)
*Pipe Branch Head/Tail position Explicit
* Pipe components creation form
2. Attaching fittings (Elbows, Valves, Flanges, Reducer, Tee, Cap etc) to Equipment


Course Duration: 2 WEEKS ( 3 TIMES A WEEK ) OR 4 SATURDAYS
FEE: 25K

Management: Ken Technologies
Tel: 08060360538, 08028553955
Email: kento2002ng@yahoo.com

OFFICE: 26, Ikotun/Idimu Road, Kazam Plaza, Suite 15, College Bus Stop
Opposite Afri Bank, Ikotun, Lagos.
TEL: 08060360538, 08028553955
EMAIL: kento2002ng@yahoo.com
OUTLET: ADDRESS: 8, OMOTAYO BELLO STREET, THOMAS ESTATE
AJAH, LAGOS. PICK A BYKE FROM DOREN HOSPITAL
CALL FOR DETAILS: 08060360538, 08028553955.






*
*

Engineering Design Using CAD, AutoCAD
Plant 3D, AutoCAD P&ID, Pipe Fit pro
AUTOCAD(2D/3D) ,P & ID, & PIPING DESIGN TRAINING
Ken Technologies is an Engineering design company focusing on implementation, Training, consulting and Outsourcing. In the course of our operation we realized that most Engineering firms in and outside the country needs Engineering graduates that are well equipped in the use of the following engineering design Software (AutoCAD/AutoCAD Plant
3D, Pipe fit pro, AutoCAD P & ID).
We are please to inform you that training in application of the following Software (AutoCAD/Pipe fit Pro, AutoCAD Plant 3D, AutoCAD P & ID) is in progress.



COURSE OUTLINE: PART: A
• AutoCAD( 2D/3D) Drafting/design
• Isometric Drawing
• Isometric Dimensioning
• Converting from 2D To 3 Dimensional Environment
• Modelling of Solid objects( Complex 3 dimensional drawing)
• Application of 3 Dimensional Tools (Slice, Subtract, Extrude, Taper Faces, Union,) Etc.
•
• PART: B
• Piping Systems Detail Engineering/Plant & Piping Layout Engineering/ Piping
• Drafting.
• *Basic Principles of Piping and its Components.
• * Piping Fundamentals
• * ASME Codes & Standards
• * Applying AutoCAD 3D Plant Software in Modelling Pipe Fittings(Elbow 90 and
• 45 Degree, Reducer (Concentric and Eccentric), Flanges, Plug, Valves, Tee) etc.
• * Adding Piping Supports(Hanger, Strut) to a Pipe and Piping components using
• AutoCAD 3D Plant Software.
•
• * Mechanical/Process Equipments
• * Flow Diagram Reading and Interpretation.
• Developing Piping and Instrumentation Diagram Layout.
• Adding Flow lines, Instrument lines, Inline Components(Reducer, Valves) to
• P& ID Layout.
• * Interpreting and developing P & ID Diagram and Plant Modelling.
•
• * Piping Specification, Piping Isometrics
• * Piping & Equipment Layout
•
Training Schedule and Course Fee
AutoCAD 2D = #10,000
AutoCAD 3D = #15,000
AutoCAD 2D/3D Combine = #25,000
Using AutoCAD 3D Plant, AutoCAD P &ID Software for simulation of pipe fittings, Interpreting and Developing P & ID Diagram: = #20,000.00/#25,000 for Ajah,Lekki, Ikoyi
Candidate.
AutoCAD 2D/3D with Piping design, Pipe Fittings, P& ID using latest Engineering Software
(AutoCAD 3D Plant, AutoCAD P& ID, Pipe Fit Pro) = #30,000/ # 35,000 for Ajah/Lekki, Ikoyi
Candidate.
Mode of Payment 70% of course Fee as First Instalment.

Course Duration: 3 weeks (Monday- Friday): 3 Times a Week or 6 Saturdays Time: 10am- 1pm or 2pm-5pm



WHO SHOULD ATTEND?
Mechanical/Chemical/Petroleum Engineers, Geologist, Electrical/Electronics, Material/Metallurgical, Electrical, Civil/Structural engineering graduate and Undergraduate, Jobseekers, Draftsman.
Training Features:
- Excellent Materials Provided (Design Manual/ Chart).
- Industry leading Software used in training (Auto CAD/Auto CAD Plant 3D, Pipe fit pro). Full Installation on Student Laptop.


Management: Ken Technologies
Tel: 08060360538, 08028553955
Email: kento2002ng@yahoo.com
ADDRESS: 26, Ikotun/Idimu Road, Bye Diamond Bank, Suit 15,
Kazam Plaza, College Bstop, Ikotun, Lagos.