₦airaland Forum

elougo:
Any idea on how i can obtain my stamp and seal.. have not got a mail to that regards since after my payment and certification since March this year. I have even paid this year's fees but the practising licence is not enough. the stamp and seal is needed

SHEEGO2015:
Hello bro! Is Registration still open and when is the Interview and exam

dprsauce:
Am not scared. Infact, am a coren registered engr. I just wanted to confirm some things

cookben:
When l go to coren site for registrations all I see is the site that requires u to put NSE no,

dprsauce:
How much please for re sit? Thanks

dprsauce:
Sorry, after you failed, are you to start the whole process afresh with the whole cost too or you will just re sit the necessary subjects you failed with small payment additional?

Ikemezewulu:
Guys, what's the best engineering course I need to study to aid my employment success at Total e&p and which engineering job at Total e&p pays the highest.

Thanks.

divad9two5:
Guys! Guys!! Guys!!!
For crying out loud, this is just a thread and not any company's website. Do not come here and submit your 1-2 liner job application and expect a response.

With due respect to the IOC professionals that have contributed to this thread so far; majority of them do not have the power to offer you a job outside the HR recruitment policy and procedures of their respective organisations. They can only offer you very useful career coaching; how you use the info is totally up to you.

I stumbled on this thread about the same time I was working towards an Msc degree and took my time to read from the very first page to the last. I learnt a lot of things from the contributions from my Seniors in the house and today I am better for it.

So before you jump-in, take the time and read through the thread, you'll find out that a lot of your questions have already been answered.

Cheers!

Thazard:
Good Morning Guys!
I'm confused choosing between being a welder and a diesel mechanic as a 20 years old so i would need your advice.

Between the two of them,
1.) Which Is more stressful?
2.) Which Is easier to learn?
3.) Which has better pay?
4.)Who lives longer?
5.)Who has more job opportunities?
6.)Who can easily move abroad?
7.) Which one's better in your opinion?

masaud:
Guys better start preparing cus there will b visual test from Tuesday next week by Gods grace.

a4olabisamuel:
Pls, how long does it take to get coren certified after the online application?

Oduok:
The operating manual of any centrifugal pump often starts with a general statement, “Your centrifugal pump will give you completely trouble free and satisfactory service only on the condition that it is installed and operated with due care and is properly maintained.”
Despite all the care in operation and maintenance, engineers often face the statement “the pump has failed i.e. it can no longer be kept in service”. Inability to deliver the desired flow and head is just one of the most common conditions for taking a pump out of service. There are other many conditions in which a pump, despite suffering no loss in flow or head, is considered to have failed and has to be pulled out of service as soon as possible. These include seal related problems (leakages, loss of flushing, cooling, quenching systems, etc), pump and motor bearings related problems (loss of lubrication, cooling, contamination of oil, abnormal noise, etc), leakages from pump casing, very high noise and vibration levels, or driver (motor or turbine) related problems.
The list of pump failure conditions mentioned above is neither exhaustive nor are the conditions mutually exclusive. Often the root causes of failure are the same but the symptoms are different. A little care when first symptoms of a problem appear can save the pumps from permanent failures. Thus the most important task in such situations is to find out whether the pump has failed mechanically or if there is some process deficiency, or both. Many times when the pumps are sent to the workshop, the maintenance people do not find anything wrong on disassembling it. Thus the decision to pull a pump out of service for maintenance / repair should be made after a detailed analysis of the symptoms and root causes of the pump failure. Also, in case of any mechanical failure or physical damage of pump internals, the operating engineer should be able to relate the failure to the process unit’s operating problems.
Any operating engineer, who typically has a chemical engineering background and who desires to protect his pumps from frequent failures must develop not only a good understanding of the process but also thorough knowledge of the mechanics of the pump. Effective troubleshooting requires an ability to observe changes in performance over time, and in the event of a failure, the capacity to thoroughly investigate the cause of the failure and take measures to prevent the problem from re-occurring.
CONTINUE READING: https://odfidtechnicalworld..com/2020/08/all-you-need-to-know-about-centrifugal.html

wip7:
Hello good day,

I have mentioned like 10 times on this particulr thread on how to personally search for any FREE Journals. Particularly, I have stated that nearly 98% of Elservier Journals are free to publish; they have reputable journals indexed in WOS, Scopus and Clarivate with internationally recognized metrics.

You can follow this discussion I wrote on May 29 which is the very recent on searching for Journals:

https://www.nairaland.com/2044554/thread-phd-students/69

The same way you search Journals in Elservier, the same way you will find FREE and reputable journals from Taylor and Francis, Springer, Willey. Royal society and ACS journals.

Just look for SUBSCRIPTION-based journals and avoid OPEN ACCESS.....follow the link up there.

In the attached image; you can also follow the website, you see Elservier has nearly 2400 Journals you can publish and large number is free (98%)..each journal has free version and contains open access also.

Best wishes

gaeul:
See what Treasury bills thread has been reduced to...When a house is abandoned...Rat and reptiles take over....I pray rates get better soonest...so this thread can come alive again

hopeful2018:
You don't know much about COREN registration. I just check your thread on nairaland.

yusufu16:
Please when is the dateline for the registration

holuwhartosin:
pls sir i study electrical electronics technology. i.e B.Sc(edu) electrical technology, and I want to do my masters in electrical engineering is that possible.

Abiola365:
what's your what's app number

rapid101:
if James manager name no de der den d list no correct.