₦airaland Forum

I’m interested
Babadetaiye@gmail.com
Thanks

Dpsychologist:
Contrary to popular belief it is not the water that directly produces Electricity.

Electricity is produced by a device called a turbine. Turbines contain metal coils surrounded by magnets. When the magnets spin over the metal coils, electricity is produced. Turbines are located inside dams. The falling water spins the magnets.

Thus, the water only spin the turbines which in turn generates electricity.

Permit me to say this...
Electricity is actually produced from a generator and not turbine. A generator is an electromechanical device made up two components. A mechanical component(rotor which is made up of magnets) and electrical components(stator which is made up series of coils). In simple terms the rotor rotates inside the stator. this produces an electromagnetic field, with an induced current from an external source(Direct Current), electricity(AC) is actually produced. This electricity is actually small but sent to a power tranformer which increases the voltage to 330kv and then sent out to the transmission station. in this case What turns the rotor inside the generator to rotate is the turbines and what turns the turbines to rotate the rotor is water..
Kinetic enerygy from the falling water is converted to mechanical energy by the turbines as they rotate then converted to electrical enery by the generator
Hope it helps...

Erolow:
check signature below

thanks

Interested.

infofirst:
On a monthly basis, I can net 20% ($100 returns on $500)trading conservatively but the market as it is can even give much more than that. But a beginner is better off if he can concentrate on acquisition of the skills first before thinking of the earnings.
Forex can be a full time source of income and it can be a passive one. All depends on choice.
I prefer you go with either copy trading or pamm. Paid signals ain't it for me. But you need some knowledge to be able to know how to pick a good copy or pamm service. Infact using copy or pamm is better for you as you can divide your fund into two, use one to do Pamm or copy services with a good provider and trade the other half by yourself.

can u pls shed more light on copy trading?
thanks

Luckyway:
Just finished writing.
Electrical guys should read generators and motors very well.
There weren't much calculations in the discipline section and most of them were easy, 50 questions in total.
You have to work very fast.
Also go through your C++ notebook.
For the Dragnet Abstract reasoning, brace up for very challenging questions. That's all for now.

If you don't have an electrical past question yet, send me a pm. I bought one and I'm iving it out FOC.

pls send to me p_tope@ymail.com

Kizo11ck012488:
Sent to all.

kindly send to this mail.. p_tope@ymail.com. thanks

Kizo11ck012488:
What exactly are we even supposed to read?

I haven't read anything and mine is 11.

Goodluck to us all though.

gmat..is your location lagos?

Toylove:
When is ur test tomorrow

1pm

Lagos brethren.......

AYORICH:
Did u put work experience

Yes

i applied on the closing date 14th and i still got invite for the test....

nawa .....

got invited too #Lagos

Luisema4luv:
Hw sure re u

because the same thing happened in my set

ckeedee:
One of my guy that wrote the test, wasn't invited for oral interview but got invitation for the training on 10 Sept.

thats because the number of people they were hoping for was not met by those called for oral....

ESFRANCIS01:
Yea, got update yesterday, IV to training which will start from 10 September 2018, accommodation and transportation will be taken care of by IPT PowerTech, Feeding will be from participant

congrats wishing you the best during your training

Luisema4luv:
So dat means nt all of u dat went for d interview dat wer called for the training

yes

during my tym 40 people scaled tru the interview nd were called for the training. we were divided into two batches of 20 per batch. training is for 6weeks nd at the end u will be accessed. a pass above the cut off mark gets u the job. gudluck

Just the normal HR questions.... U must be a team player coz the job requires u to work with a team. Incase u are asked. With relevant experience working as a team player...gud luck

everybody will receive mail either success or the other one...

Luisema4luv:
Abeg frm alakuko who sabi the address

to the head office or venue for d test?

Prepare for verbal reasoning, abstract reasoning, quantitative reasoning nd engineering questions(electrical nd mechanical). Gud luck

Please i also need the e-book. p_tope@ymail.com thanks

kolinton007:
Thanks, Bro.

uwc

kolinton007:
please, can you help me confirm how legit it is?

there is currently no graduate recruitment going on...#confirmed. but if u have sent ur cv don't worry when the tym comes if u are qualified u will get a mail. that should happen around mid of the year.

kolinton007:
on the 20th, for graduate training programme.

i hope this is valid but nevertheless another recruitment should start by mid of the year.

kolinton007:
Have you heard from them since you applied?

when did you apply?

Nwachinaemelu1:
Please who knows the monthly salary for IPT Field Engineers?? and how much do they pay their Filed Engineers while on training after being recruited??

basic salary 80k