₦airaland Forum

soty: I can't say d same for my 07 camry..doesn't guzzle coz I gt a 2.4L engine.quite frankly I thk it gets gr8 miles per gallon..neva had need2worry abt recalls too

Nightshift: Isn't that a Japanese? Toyota is recalling millions of cars it manufactured between 2006 and 2009. Your Japanese vehicle could catch fire, return it quickly! BMW for life!!

dapo338: If It's V6, then i don't think its much......atleast that can take you from Lagos-Ife to and fro.
Also fuel consumption depends on the way you drive, if you over stress ur engine, definately it will consume more fuel.

2buff: I have an '09 Camry, Hybrid join....and I can't say I'm all too pleased with it's fuel consumption.

zoogy2007: Your check engine light must be illuminated if this is happening. Try servicing your injector and change your air filter. This will improve your fuel consumption. If it does not improve check the o2 sensors a EGR valves. Good luck

gulfer: For a start, 240miles translates to roughly 387km (city driving); and for a 70liter tank, that about 5.5km from 1liter of fuel. Do a run on the highway before coming to conclusions, again; do you do use AC all the time as well?

gulfer: For a start, 240miles translates to roughly 387km (city driving); and for a 70liter tank, that about 5.5km from 1liter of fuel. Do a run on the highway before coming to conclusions, again; do you do use AC all the time as well?

Ikenna351: How many wires does your o2 sensor have?

If its 4, that means the sensor has heater. And to have the heater, it will need 12+ from relay to power the heater. You will need to find out if you are getting 12+ on any of the wires to the sensor.

You will also need to find out which of the wires is from ECU to the sensor (signal wire). o2 sensor signal wire should have about 0.65 volts, when tested, without connecting it to the sensor. if it doesn't have its own volts values, then the ECU is not signaling to the o2 sensor or it could be the wire has broken and not connected to the ECU anymore.









Bros I tire o. Pls where r u. D sensor has 4 wires sha but d millivolt fin go hard o. Abeg help me do am na. Where r u sef. But pls u can give me more info shaYou can as well test the oxygen sensor to know if it still produces factory volts values, to really determine if actually the sensor has failed or not.

All these test above will have to be done with DMM (Digital MultiMeter), the one with milivolts feature, that cost more than the others. Maybe 2k or so.

Do you think you can carry out the test by yourself, I

f i guide you?

But i still need to know how many wires the o2 sensor in your car have.

Ikenna