₦airaland Forum

kennyjam:
We've chatted before..... Check


How far the jim ovia, is it still ongoing?

nice to meet you again bro I don't have info on a deadline but I assisted someone to apply last night

LivingSage:
@ Nosainwe, just submitted my application yesterday and it closes today as well. So how have you gone about yours?

goodday bro.
sorry for not getting back to you sooner
I completed my application too
most stress form i hv ever filled

Good nairalanders
i was wondering if anybody knows the format of the aptitude test we should be expecting

kennyjam:
Ok

why does this name sound so familiar

ennydammy11:
Who has been able to apply for this scholarship?

I hvn't met anyone yet
but once I get a zenith bank acct probably tomorrow, I would update you

Good day Nairalanders
I just saw online that this scholarship is out
and application has started although I am yet to apply due to incomplete documents which i would tend to soonest ,
Please It would be really helpful if beneficiaries of this scholarship share their experiences ,tips and also past questions,
as an undergrad one thing we need to survive in the academic environment is ego.
cheers !
Apply for MUSTE Scholarship
���
https://www.jimoviafoundation.org/user/register

08185212421

good morning bro I need the pastvquestions too nosa.inwe@gmail.com thanks

Cacawa2:
I am sure I'll be speaking the minds of everyone on this thread when I say you are entirely right.

We all agree and want to learn the hardware (embedded systems) alongside the programming.

I agree that even the so-called programming many "experts" deploy is based on already existing libraries.

Now there is a good reason for that (such as: global standardisation... we have not seen the last of that yet...more discussion on that is coming).

Yet is is true that local content is best driven when we can actually build from ground level. Perhaps that way we can have our own "standardisation".

However to be fair, on this thread, there truly have been comments on embedded systems and hardware development and even IOT (in the first two pages). What must have caught the most of your attention is the retinue of comments such as ...."I am currently learning python..."

It only shows the skill gap we really and urgently need to fill-up.

The reason the centre I am setting up is called ROBOTICS and AI is that we are not just developing AS for the sake of the financial and marketing sector only. On the contrary, we are looking to deploy AI for Robotic systems, i.e. hardware systems to support infrastructure, agriculture and other needs. IOT is definitely a key component.

The workshop at the centre is specifically for Product Development.

Your comment was timely and beneficial. Kindly share with us how (hardware or software) you would be able to intervene, and in what capacity. Just so we know what background you are coming from.

Good day my good sir @cacawa2 and to everyone who has contributed to this thread,
I must say that I consider myself lucky stumbling across this thread
I am a first year student of the department of Electrical and Electronics dept (UNIBEN) who is intrigued by the topic of this discussion in a nutshell I am fascinated by anything tech,
I plan to major in electronics/controls and if all goes according to plan specifically industrial robotics /machine learning.
I have been doing alot of research on my desired field of study and skills I need along the line as a result I am into python already ,Sir @cacawa2 seeing what you have achieved so far you have ignited the flame in this young man's heart ,more power to your elbow .
I wish to send a PM to you,I hope you don't mind.

Draei:
Then kindly take your mind off it.

good morning bro
i dey tight corner
i paid my school fees yesterday
altho i wasn't aware that freshers were allowed to book b4 then
i tried booking both hall 3 and hall 4
but the site "said no bed space available in your desired hostel"
what do i do?

DNA1997:
Well I read everything from beginning to d end still waiting for unibest engineering students

aiy! Sir

softy:
Hmmmm, God is ur strength bro.

Where can I start now ooooooooooo....?

OK.

My motivation then:

1. God factor : with God all things are possible.

2. Time factor and Curiousity: how best do u make of ur time.? How well do u want to learn and apply new things to ur current knowledge in engineering or science?

Remember : there is time to read, there is time to relax.

For example: Those days, I could read up to 9 hours non stop but nothing enters my head after 11pm, even when reading for the simplest course subject, taking my time slowly and making sure I understand the problematic page before I move on to the next chapter. Created time to look for more materials apart from the Lecturers Handouts. Created time to peruse through and connect every dots on the I'd of any difficult topics. Created to play football, laughed harder through comedy movies, watched ICT or SciFi movies to open u up for scientific curiousity.

Funny abi? But these funny things made me an OVB student when I graduated.

Note pls: what worked for me may not work for u, because of our individual differences.

2b. Be positively passionate and committed, not emotional but constructively be truthful to the matter at hand - being a successful student.

3. Be humble, learn from others, don't argue unnecessarily. Don't think u are perfect. Yearn to learn new things. Create positive environment for urselves not minding the storms of life that could be discouraging. U need to shine forth. Learn from people mistakes. Mingle with people that u are convinced that are better than u. Teach the little u know to those who know lesser than u.

For Electrical Engineering books:

There are billions of soft copies of Electrical Engineering Books on the internet. Use "wikipedia" to ur advantage all the time.

Learn how to draw and remember Electrical drawings, learn how to remember formulas without mincing them. Learn how to meditate on those formulas, this helps slot. Don't cram, u will forget and develop unnecessary headache, at the long run.


Finally, Continuos Assessment is usually 30 marks or 40 marks as the case may be or based on the course lecturer. While exam could be 70 or 60 marks respectively.
Be strategic. Strive 22/30 or 28/40 or more, if not everything in CA.

For exam strive to have 48/70 or 42/60 or more, if not everything.

Target to always high marks in 3 unit courses.
Target not to have low marks in 2 unit courses.
Avoid carry over or repeated course always.
Don't have over confidence attitude, it results to outright failure.

When u are getting the crown little by little, don't be proud..... Help people solve mathematical problems. Be crazy about mathematical manipulations because it cuts across all ur courses in engineering apart from GST courses.

Solve a lots of past questions.Be highly resolved about this, please.

Get a further mathematics texbook to understand the rudiment of calculations in courses.

Get Engineering mathematics 1 and 2 for easy mathematics calculations.

Above all, determine and be focus, to have a very good and excellent grade, then the Good Lord will add better values to ur secret hardworks.


Thank u sir. God bless u. We will meet at the top.

Nobody has it all. God will make u successful in the journey.

Yes u can be the best of what u are!

sir
i am really grateful,u hv touched a soul ,i promise to work on everything u painstakingly mentioned up there.
Thanks for ur time

softy:
When I remember those days, I smile very well, then Praise God deep down my heart.

Among many, I will humbly mention few.

FIELD THEORY 97
Power System 95
Engineering Mathematics II, 97
Control III, 95
Electrical Machines 96


Electrical/Electronics Engineering (POWER OPTION)


In my ND days, I got 4.0/4.0 as GP in first semester, ND1 or 100L.

Most courses scores were 94 and above.

Glory be to God who made it possible.

really impressive sir! I am motivated
I jst got admission same course
i would appreciate if u give me a heads up
be it tips,materials
especially for a first year student
thanks in advance

Raustin:
4 simple things to do:

�-Create multiple accounts on upwork.com

�- Get the accounts activated using the SECRET method

�- Design outstanding profiles to stand out from the mass of other freelancers.

�-Work harder and smarter using tricks and pro-tips

If you need help getting your account approved .
Chat me up on 08101053255

I will take you through some basic things you need to know like:

�how to get your account approved in less than 24 hours (some persons charge as much as 6000 naira for this alone).

�how to write a professional profile+6 mistakes to avoid in your profile

�how to write proposals that get you jobs quickly+ 5 proposal templates I use to get jobs

�how to land your first job on Upwork +the 1 big advantage newbies have but don’t know how to use.


�how to get clients to trust you + the smart way to ask for a 5-star review without actually asking

�the fastest way to earning on Upwork


�other ways to earn as a Student outside upwork

�how to withdraw from Upwork

��The class is on WhatsApp starting starting as soon as you make payment.

��The training fee is #1,000 naira.

��For enquiries, message/chat me on 08101053255.

[color=#990000][/color]

pls b4 enrolling in your classes
i already have a nigerian upwork account
i just created it
but the question i want to ask
will a foreign account do better than the one i have currently

dboy080808:
What issues?

the links aren't loading

Rawblings:
sure

i domo for u boss
i am an engineering fresho
elect/elect

Rawblings:
For the newly admitted guys especially in Engineering. You people should not forget matric rice oo

lol
are u are engineering student

dboy080808:
Sent

tanks man
God bless
altho i having issues trying to download the zip files

dboy080808:
If anyone here wants to get the CompTIA A+ certifications and maybe CCNA. I can give you the ebooks for free and links to video tutorials.

please help a brother out
whatsapp 08185212421
or nosa.inwe@gmail.com

Keep up the good work
God bless

Draei:
Hall 5 is 25k while Hall 6 is around 45k or thereabout.

does one need connection to get hostel space in d above mention hostels?
And please i am engineering fresher
i read sumwhere dat
f .maths is a prequisite to study engineering
whereas jamb brochure says otherwise
some one said they mi ght transfer me to anoda dpt during clearance

donjosh47:
But bro can you please give me an in depth explanation on this

seconde
p.s
100$
What if i dnt hv dat much

We all have movies we can watch over and over again just to enjoy good cinematography ,
But we all have movies that we still sit up for when the fight scenes come up
Be it blood raging or just action packed humor
I will be sharing my top three fight scenes in no particular order
** Achilles vs Hector Fight (Troy)
Location: The gates to the city of troy
I love this one on one suspence filled sword fight .
In the hector dies tho
Sobs

** Neo vs Agent Smith clones (Matrix)
Location: empty parking lot
Fans of the block buster movie matrix can confess that the trilogy is packed with breath taking fight scenes
This is my favorite altho they should have notched down the CGI effects

**Harry potter vs Voldemort (harry potter and the deathly hallow)
Location:Hogwarts school ground
I favorite movie of all time
Die hard fan btw
The whole student vs dark force battle got my heart
But we lost good men
The twins most especially ....cleans tear drop �

Nairalanders add yours

zeanslim:
Nice one ... Most of my traffic are organic on

https://www.trendytechbuzz.com

Traffic just for today.

can u walk me through the proccess of getting a site like urs

08185212421
nosa.inwe@gmail.com
pls enlighten me on the earning packages

Pls send me
think Big by Ben Carson
thanks in anticipation
nosa.inwe@gmail.com