A

Hmmm

iSpread:
.

This Guy is a Scammer...House beware.

@pufframmy I trusted dealer,Kindly patronise fast and genuine dealer.

Thanks for your sincerity and good price.

Nice

Let me book space as I see these going places as Naija is broke

I pray it brings positive result.

Fogman:


Installation cost will be deducted and you will pay him installation cost ( not Dvd cost) after installation.
specification in on the 1st page of this thread

*BREAK DOWN THE COST
*HOW WILL THE PAYMENT BE MADE

Fogman:


Ok sir, but he will only come installation when you have taken delivery of item from Lagos

You will have to forward it to him when i am ready,

the money will be paid when he is about to install it,since the cost include installation

Secondly,you have actually not giving me the spec of a car dvd and also the accessories it came with.

thanks

Fogman:


N65k with Navigation
N55k without Navigation

Need the number of your Abuja Resource Person

Fogman:
Toyota Matrix

How much is this one

Cost and installation

You can also describe the system

RIP to the Police,..I suspect Intel

Hi Fogman,
I need a DVD Player with navigation system and camera for Toyota matrix 2005

85k sorry for the mix up

90k serious Buyer

98k

Bros 90k serious buyer

70k serious buyer

Rushtec:
I even see person dt want to see NOTE 4 WHITE CLEAN AT 70K

. Where and upload the pix here,..forget dis 1 when dey say cheap thing 90k

Everfrank:

1. Signal is transmitted via rf so decoders must have rf out port. A modulator must be used for decoders without rf out port.
2. If you can afford use a modulator per decoder for all the decoders for better video quality. A modulator converts AV video into rf video.
3. Take video with coaxial cable from rf out port, or from modulator, of each decoder to a combiner. A good splitter used in reverse will do. Assuming you have 16 decoders to shoot 16 channels you can use 5 pieces of new 4-way splitters. Using coaxial cable:
- connect one splitter to the signal-in of your mixing booster in reverse order. A 42db alcad booster or a 20db telavees booster will do.
-then connect your four remaining splitters to the four points on the first splitter also in reverse order. That will give you 4×4=16 points where you'll fix(mix) your signal inputs from 16 decoders, or from modulators as the case may be.
Mixing of decoders is a task that requires patience and time. It's easier if you are using modulators. Those akewu astel modulators of 4k each will do just fine.
Below mixing guideline is without modulator.
- get a good tv with functioning remote control preferably LG. LG displays the number of each rf channel on the screen for easy mixing.
- connect one coaxial cable line from your mixing booster output to the rf in at the back of your nearby tv- with a tv plug.
- your decoders are to be mixed in one after the other. On the TV rf system the channels start from 21 up.
You'll need a female tv plug for each decoder. Buy the iron type. A pack of f-connectors and one good AV wire. Mixing is after all your 16 decoders are functional with their signals and are showing your desired channels.
1. Power on your first decoder and connect it to the TV using the AV wire.
2. With the decoder remote press menu and enter system setting. Scroll down and select UHF and change the number to 21. Save and exit.
3. Change the tv input from AV to RF.
4. Use d tv remote and enter menu of then setting and search the tv. If you are very conversant with searching tvs then use manual search as its flexible and faster for mixing work. Otherwise select auto search and wait.
4. After searching then your first decoder will appear on the TV as channel one(with uhf number 21).
5. Then check the video for clarity. You may need to adjust the gain of your booster to get optimum video quality.
6. After your channel one is satisfactorily clear then you repeat step 1 to 4 for each decoder to mixed them.
7. The catch here is that each decoder must be on different uhf channel. As channel 21 is your first decoder put the second one at 23, the third one at 25, the fourth one at 27, the fifth one at 29 and so on. The rule is as you start with an odd number then use odd numbers for all decoders. Ditto for even numbers. This gives a gap of one number between d decoders to prevent jamming and interference.
You'll have to be patient as some decoder will outshine others. This is because you are using assorted decoders with different clarity strength. It's better to place decoders with the sharpest video last and vice versa.
After all your decoders are mixed harmoniously then you shoot your signal out. It can reach 100 meters then boost it and continue.

There will be more hints for anybody that has reached this stage. Just ask questions.

.
Wow thanks, I understood almost all just d connection from decoder to the combiner and to the RF,secondly how does 1 make it crystal clear in all rooms entered

Then enter a bus from your state meet him at onisha for a fee of 10k and gain 25k later,abi u no wan gain

jazz04:

Market rate? What market rate? 115k is a steal for new s6 edge. The only reason he has not sold it is because he's in onitsha.. You should be looking at 150k for this phone.

The boi will soon steal from the state govt, the father did what the govt would have done if he was caught by the state police and less that what the jungle justice guys do to thieves

65k serious Buyer

novozymes:

Now available for N115k

Bros 115 K u guys are too funny ,look at the market rate and value ur goods for fast sale

Note what? Then secondly state the price and Location

Location?

Come force me buy expensive iPhone now,who iPhone don erp,ogbeni reduce your price..My expensive Seller

Funny thing about U guys the cost of a gadget is 180k and U want to sell the used 1 for 160, why do u feel a buyer with 160k wouldn't go for the new 1 and enjoy the joy of first hand buy well I second the 1st pricer and I say a 100k also

40k serious buyer