₦airaland Forum

Pls house, what could be the cause of Qsat Q26g displaying upgrade main code loader while trying to flash or reload it? I have tried version V8.09, V8.01, and 8.5,
the decoder detects the rom.bin file, reads the file to 100% and say UPGRADE MAIN CODE LOADER, check error, try again

davodyguy:
Flash is a dongle

Don't connect anything first

I have tried that too, I left it on all day, it jst displays the start up screen and reboots continiously

davodyguy:
Put it on first without nSim or dongle

tanx but there is nothing connected or inserted in the decoder jst the flash drive and the response is the same

Pls can som1 help me out, I have a Qsat Q26g, it displays Qsat and then reboots continously, I have downloaded the rom, renamed the file to rom.bin, placed it in a freshly formatted drive but there is no response from the decoder it jst reboots after displaying Qsat.

Pls can som1 help me out, I have a Qsat Q26g, it displays Qsat and then reboots continously, I have downloaded the rom, renamed the file to rom.bin, placed it in a freshly formatted drive but there is no response from the decoder it jst reboots after displaying Qsat.

paulowas:
Your location,please?

lagos, mile 2/Amuwo

i need som1 dat can motorize 3m dish, my mail is realpope5@gmail.com

u need a Quantity Surveyor, A good Engineer or go to building section, u might get useful tips there. but if u dont get call me on 08117397528

check out this diesel powered range, beside my work, its also manual drive (6speed)

macodollar:
I don't know how correct u are but I know dat I am tired of the this power vu spoils my bizness. I installed this thing in February and it always disappears at night. I was told to buy a 1.8m dish and an Eurostar Lnb worth #6,500 (brown packet). I did all this and yet this thing still lost signal in midst of a match. All my customers ran away. I think its time I sell off everything and go back to dstv. so I offer the following for sale:
brand new Strong 1.8m dish
1 month used 1.3m dish
brand new Eurostar Lnb
1month used super max Lnb
1 month used super Esat decoder.
Location: Ojo Lagos
phone: 08133528010

u better be patient before u sell off ur investment, a guy in my area use PVu @ his viewing centre and he has been enjoying it, why dont u lend different decoders and see which gives best signal and is more stable coz som1 above said his qsat works fine

ok, but she must join saraki and dasuki in court for misappropriation of funds

most consumed food in d country, rice sellers and restaurants now have a real excuse after dollar

Try Power Searching with google and feel search on another level.

08117397528

may God heal the injured, looks more like mitsubishi not hilux

In addition to all the above observations, people should try to install subframes in walls before the actual aluminum fitting. These subframes have arms like buglary proofs, the aluminum frames are drilled and well screwed to the subframes this prevents any sort of movement that can cause cracks during use

Also when electricians and plumbers are patching up their work (conduit pipes), people don't usually pay attention to what they mix which varies from what the mason's mix and when they are passing and pulling the cables the pipes move and pushes the mortar used to hold the pipes and there will definitely be crack

Don't allow ur mason plaster/render the wall first and begin to finish up window dressing the following day, rather they should fill up the window frames prior to plastering so they can carry out wall and window finishing @ once

xenoo:
my c-band lnb max out at 57%. Do u knw of any tweak to boost d signal, ive tried all i knw

jst as som1 advised u need to tweak the lnb, but dat could be hard considering u will stand in front of d dish hence loose signal, best bet is to tweak 4064 H 19850 to 78% to 80%, then your channels should show. make sure u note d % drop when u stand in front of ur dish so u can knw when ur tweak works

xenoo:
gurus i need assistance, afta days of trackin i finally got sonykix freq green at 57% max on my 1.8 m dish, but suprisingly wen i scanned(auto/blind) no channel came up. Im usin srt4922. Urgent reply pls. Location b/kebbi

57% is not enough, try to increase to 61% and above, rescan, they should come out

the biggest of all was not mentioned, Random parking @ Bus stops, The way those danfo and LT park on the road while loading is a source of concern and is one of the major cause of traffic jam in lagos, Get to airport bus stop to Ikeja along you will wonder whats causing such in a road that wide, and its d same every where along route

Chinedu7:
This is the guy's contact number : 0803 454 8205. He's at Electromart, Bridgehead, Onitsha.

d problem is i stay in lag, but tanx a lot for ur response

Chinedu7:
N1,500.00

can u pls send d contact of the person who can do it, my mail is realpope5@gmail.com

Eldorado382:
D software versions are 69x=132p & 108p, 69xi=117p & 104p if there tested & trusted version dat do pls tell me

3.17p should be fine for ur 69xii, if ur tvc is unstable on 3.17p then it's smtin else. sometimes tvc behaves like dat, small cloud and its off, even after it rains and the weather is fine it takes time for it to come back and other channels on d same sat will be working fine, get 317p here
crosat.us/upload/index.php?action=view&filename=SRT4669XII_7111_Intg_STR_317p_20140619.zip&directory=Strong%20Receivers%2FStrong%20WIZKID%20Files%2FStrong%204%20Middle%20East

sorry about the initial mistake

Eldorado382:
D version is 69xi

I mean software version as 303p or 317p etc

Uthmanloay:
PLS because OF D FINAL MATCH TODAY I WANT 2 TRACK CHAMPIONS TV PLS D TP AND D POSITION ANYBODY PLS HAV BEEN TRYIN SINCE 1HOUR

track with 11045 v 40000, then enta 11008 v 05000 for ctv

Eldorado382:
House my 69x qch i was using to watch TVC stopped playing d channel once i inputed option software to accept biss key i tried factory default to restore it but to no avail- ur help pls

what's d version

Emeritus153:
I tracked eutelsat7e with 10804v30000 and I got 74% signal but not able to hit green on 12728v30000 pls what's wrong.

check the feed tp if its green, to save ur self stress, 12728 does not flash green on time when tracking u have to be patient, u can also use the recommended tp given by odilibe above

I wonder what was used to type dat document typewriter or Pc, coz if it was Ms word it will be underlined before printing,

congrats, most teachers give a lot without taking back, :Pcongrats, most teachers give a lot without taking back,

Alexdinho10:
my iso20 sony is @ 59% after i input the pv keys it is still scramble sometimes i just receive audio my rx is 4922 pls i need help.

try to increase ur signal to 61-63 and if ur key input is correct it should show

Spy360:
Brother what is the latest SW for 4669xii? Thanks.

3.17p check crosat web

ManirBK:
Tandberg service only and they are now showing bundesliga live berlin v hamburg

non HD as in mpeg4 (4669xii) ?