cjfbn:
What is the name of this roofing sheet?

cjfbn:

Any idea on long span and steptiles?

sgtponzihater1:


I would strongly suggest kobocity in addition to the scrolling system to get to posts also adopts the number system. Where people can jump from number 1 to even 10 without necessarily scrolling through every conversation.

A lovely site so far overall, and would recommend other jump in

EgunMogaji2:


For the record.

1) this is still rather unusual in the USA, Wood is used 90% of the time. Steel is more for partitioning spaces in a refurb.

2) dominion showed a whole estate in Nigeria that was built with steel studs.

hslbroker2:
good questions.

Doing pop before plastering is the best, because it will enable the plasterer to gauge and smooth all the edges of the pop design.

Plumbing work is done before plastering because all the walls the plumber will break before laying the pipes must be cover with bricks and mortar by the plasterers.

Same applies to electrical pipping, it must be done before plastering.

Frames for doors must be available on site before plastering because if you don't provide it for the plasterers when they are plastering coming back for them to install the frame after plastering will cost you, time, energy and money.

Windows must be on site install, before plastering it save you money and it is the best ethic to get wonderful finishing.

After plastering is fixing of plumbing and electrical materials for the project.

Next to painting.

But before all this can be done you must cover the buidling.

hamtabfawaz:



• Plastering comes before POP √

•I think Plumbing comes before Plastering..

ibietela2:


Hehehehe, now am confused

MrOkenwa:

Hi, is it normal for the stab not to supply the building when the input volt drops to a certain level? I haven't got the true picture as the person that was at home when it happened didn't take note of the input voltage at that time. Otherwise, it's been working fine

uncleteeh:
Good morning to all and sundry.
+2348108408732
Oakgroupdesigns@gmail.com

ibietela2:



Thanks for the detailed answer, if they do the POP before plastering won't that stain the POP or cause some kinda damage?

uncleteeh:
Good morning to all and sundry.
+2348108408732
Oakgroupdesigns@gmail.com

ibietela2:


Didn't see number 2

hslbroker2:

this is stepped tiles

n3xt:


Don’t get it twisted. Plastering comes before doing POP ceiling.

The initial post recommending doing POP before plastering is referring to architectural ornaments on windows, pillars, beams as POP.

You do those before plastering if you want to achieve the best result.

Both are actually right but the terminology used is exactly what’s causing the confusion.

n3xt:


Don’t get it twisted. Plastering comes before doing POP ceiling.

The initial post recommending doing POP before plastering is referring to architectural ornaments on windows, pillars, beams as POP.

You do those before plastering if you want to achieve the best result.

Both are actually right but the terminology used is exactly what’s causing the confusion.

EgunMogaji2:


Efficiency.

What’s most efficient?

POP after plastering.

If you’ve done POP before plastering you can stil do plastering without pulling down POP but the bricklayer will curse who created the snaffle

EgunMogaji2:
I come in peace and bring joy and good tidings

To my fellow legit business men, I pray that in this new week in the holy month of Ramadan that we celebrate with new winnings.

Carpe Diem.

PAPAFEELERS:
Dear my Ogas,
Please how much does this plumbing materials cost, the list shows the number of pieces my engineer sent me that would be needed. make una help me oooooo with the unit prices .thanks

Cc: Next , spyder, egunmogaji,twinskenny, Gbadexy, Oga Rotech the Don,Topsy etc.

1) 1inch P.P.R pipe -25
2) 1inch P.P.R elbow - 25
3) 1inch P.P.R socket - 20
4) 1inch P.P.R gate valve - 3
5) 1inch P.P.R union - 10
6) 1inch by 3/4 (three quarter) P.P.R tee -20
7) 3/4 P.P.R elbow - 20
3/4 P.P.R male&female - 10
9) 1inch P.P.R male&female socket -10
10) 3/4 Tap - 3
11) 1inch non-return valve - 2
12) 1inch tiger nipple - 8
13) Tree tap - 8
14) 50mm P.V.C bend - 20
15) P.V.C gum - 2
16) 100mm P.V.C bend - 10

sgtponzihater1:

Nice. How many bedroom is this?

dam4sam:


Do everything to get a Prepaid Meter, even if you have to buy it.
That is your best solution.

edimalo:


I have tried that even paying for it but was told that everything is now under federal government mass meter.
I will prefer to pay if that is the best solution.

gbadexy:

cc rotechh77 to do justice to that.

EgunMogaji2:


You’re still speaking English to them I think.

You can get a meter. Just talk to the security staff for a hookup. The security man knows the company better than the CEO.

EgunMogaji2:


You’re still speaking English to them I think.

You can get a meter. Just talk to the security staff for a hookup. The security man knows the company better than the CEO.