Ibk2020:

I would rather pay higher to get a nice wood board TV console than to go for the pop version.
I think the Pop version will soon go out of fashion.

the combination is good though

I mean plaster board plus wood design... simple stuff though not too elaborate

Happy new month to everyone..

We will also be doing smart lighting for our Abeokuta project...

#lighting # cctv automation

https://www.nairaland.com/5681155/electrical-audio-system-cctv-fire/77#101277847

n3xt:


Ok. I’ll work on something modern and share by tomorrow

Expect a flat roof though and lots of translucent materials.

How far?
Happy Workers day!

Happy Workers Day!

coldcandy:


Lol...
Oga de fear say him parole don cast!
No worry sir. Some people likes disorganised organisation.
Nothing do your job!

lol

eliteweb:
Happy Workers Day!

Lolzzz, this is incredible.

Ibk2020:

I would rather pay higher to get a nice wood board TV console than to go for the pop version.
I think the Pop version will soon go out of fashion.

Everything goes out of fashion eventually..

I sell hardwood

2x2

2x3

2x4

3x4

2x6

1x12

Call for more info

It depends on many factors such as your location, nature of the soil, design, finishings etc.

Olypm:
How much will cost to build 5 bedrooms bungalow as of now, just normal bungalow

Sparingly used luminous 1.5kva 24v hybrid inverter up for sale!

Luminous inverter with inbuilt 1000w solar charge controller up for sale.

Condition: works like new . Warranty tamper seal still intact.

Location: Lagos mainland but can can waybilled to any state on buyers expense.

Contact,
Smartcell global services
CALL LINE :: 081-350-31951
WHATSAPP::: https:///2348170385620

Please house , I want to buy a submasive pumping machine because the one in using isn't pumping water very well though it's 0.5 , now a plumber asked me to buy another one which he called the name GranPa and PaJimoh , though the name looks strange , please I want to know the best pumping machine to use because the borehole has just 8pipes and the said water isn't much in it , please I need advise and if there is any other pumping machine that can be recommended

Good afternoon from my end here.

This is a procurement problem and many solutions are in practice depending on many factors. I won't make it an academic treatise, however, I'll do justice to it in my own way.

The following are the procurement options or methods in operation.

1) Traditional or Open procurement method.

Under this method, the first thing that should be done is nomination of consultants. The consultants could involve an architectural firm, a quantity surveying firm,civil or structural engineering firm, electrical and mechanical engineering firm and a project t management firm depending on the project. Appointment of any of this consultant can be done in two ways - either through nomination/selection or through competitive method. By nomination/selection, I mean you can invite reputable firms to undertake the consultancy of the project. On the other hand, you could advertise the need for consultancy in 2 or 3 national dailies, tender's board journals or construction journals for any interested consulting firm to apply. Thereby, successful firms can be nominated.

When the job of nomination of consultancy have been done, then we move to design of the project which is the primary responsibility of the appointed consultants. If it's a building project, the architect takes the briefs and commence schematic designs to be approved by the client before embarking on working drawings. The quantity surveying firm should also be involved at this design stage to ensure that the consulting architect isn't designing out of budgets.

If it's a civil engineering projects such as roads or railway, then the consulting civil engineering firm will be in charge of the design.

At this stage, all the appointed consultancy firms must have been done with their working drawings - architectural, civil or structural, electrical and mechanical drawings. All these working drawings will now be handed over to the consulting quantity surveying firm to produce firm bill of quantities which will itemise cost of materials, labour, equipment, overheads, preliminaries and other necessary cost that the project entails. That means that we now have the working drawings and the projected budget (The quantity surveyor's estimated cost) for the project. With this information, we're now armed with the designs of the projects and projected cost. Then, we can now proceed to tendering or bidding.

I'll send in the tendering part in my next post.

doyen1:
I have a question please.

If someone wants to do a serious build, not kobo kobo build, but like a turn key, how do you invite bidders to bid? Where do you advertise for bidders? Or you will approach Julius Berger and ask them to quote and then approach other people one by one? Then how are you sure you got the best architect, or builder if it is limited to those you know?

Then will one company design and build or you have to get design separate from build?

waley007:
Please house , I want to buy a submasive pumping machine because the one in using isn't pumping water very well though it's 0.5 , now a plumber asked me to buy another one which he called the name GranPa and PaJimoh , though the name looks strange , please I want to know the best pumping machine to use because the borehole has just 8pipes and the said water isn't much in it , please I need advise and if there is any other pumping machine that can be recommended

What is the height of your building that 0.5hp is not enough to pump water to. What am using is 3/4hp and i have been using for the past 4yrs.

Go for original DAB or Myhome.

topsy23:


What is the height of your building that 0.5hp is not enough to pump water to. What am using is 3/4hp and i have been using for the past 4yrs.

Go for original DAB or Myhome.

How much is the original DAB or Myhome?

sinorte:


How much is the original DAB or Myhome?

What is the height of your building. Are buying 0.5hp??

somehow:


yea but to me, this isn't a marriage. why is she not borrowing him money to complete their permanent home instead of borrowing him money to pay rent?

Why is the man not loaning money from her to build their permanent home instead of loaning money to pay rent?


It all still boils down to this

The question to ask here is “How can a man sold a house for N150m 7 years ago and can’t build another one?

That should give you ideas of why the woman need to act the way she did.

And this

The N24m was a loan refund to the woman.

Make I no lie, men sabi fuckup.

Note the bolded

Ibk2020:

I would rather pay higher to get a nice wood board TV console than to go for the pop version.
I think the Pop version will soon go out of fashion.

Thats what I do tell my clients that wood TV faux is better with fiber skating for wall frames .

I'm handling two units of TV faux wall and wall skating and frames in abiriba - abia state

Full wood

Our new project

topsy23:


What is the height of your building that 0.5hp is not enough to pump water to. What am using is 3/4hp and i have been using for the past 4yrs.

Go for original DAB or Myhome.

a bungalow

waley007:
Please house , I want to buy a submasive pumping machine because the one in using isn't pumping water very well though it's 0.5 , now a plumber asked me to buy another one which he called the name GranPa and PaJimoh , though the name looks strange , please I want to know the best pumping machine to use because the borehole has just 8pipes and the said water isn't much in it , please I need advise and if there is any other pumping machine that can be recommended

My borehole guys swears by, not at, Atlas.

Olypm:
How much will cost to build 5 bedrooms bungalow as of now, just normal bungalow

With a moderate finishing,a 5 bedrooms bungalow as at now will cost between 25-27million naira.

KelvinCoaster:

With a moderate finishing,a 5 bedrooms bungalow as at now will cost between 25-27million naira.

Bungalow?

KelvinCoaster:

With a moderate finishing,a 5 bedrooms bungalow as at now will cost between 25-27million naira.

make una stop this thing na. Someone should please tell me how 5ml can do a bungalow please.


I don't need bulletproof door or corrugated roofs

EgunMogaji2:


My borehole guys swears by, not at, Atlas.

There is nothing wrong with Atlas if you buy the original one

emmadejust:


Thats what I do tell my clients that wood TV faux is better with fiber skating for wall frames .

I'm handling two units of TV faux wall and wall skating and frames in abiriba - abia state

Full wood

Pictures please.... Thank you.

waley007:
a bungalow

0.5hp should be okay

DAB 0.5hp is between 30 and 35k

Myhome 0.5hp is around 28 and 32k

KelvinCoaster:

With a moderate finishing,a 5 bedrooms bungalow as at now will cost between 25-27million naira.

No wonder boys are either escaping to Canada, and others joining IPOB or Amotekun. The inflation rate is scary.

kopell:
There is nothing wrong with Atlas if you buy the original one

different names everywhere I don’t even know the name of the one the installed for me but working well still

kopell:
There is nothing wrong with Atlas if you buy the original one

Innobiz on Akala Express is where I buy all my plumbing supplies. The husband and wife team knows better than to sell me inferior quality stuff.

michlins:
make una stop this thing na. Someone should please tell me how 5ml can do a bungalow please.

I don't need bulletproof door or corrugated roofs

I would have spoken but my Oga Kolashangone is in the house

somehow:

Bungalow?

Yes oo!

5 bedrooms is a big 'foot print'.

sinorte:
Please could someone help me understand the major difference between TV console made of POP cement and that made of plasterboard.

Which of this is ideally cheaper and more durable? I know one can hardly tell the difference once the two are screeded and painted.

Cost effective. = POP Cement is cheaper
Not just Cheaper, but also better & Stronger.

I would not advice my clients to choose Plaster board over PoP cement, whether for Building a Tv console or making a false ceiling.


Plaster Board : comes in Ready made form. Usually fits with screws.

The Biggest advantage of Plaster Board/Gypsum Board: it's a quick installation process & a cleaner Method.


Disadvantages: Crack occurs with the slightest movement, For example : cutting of space for search Lights.
Incase of Repair, you will need to Pull down a bigger portion for repair.
If moisture seeps into the gypsum ceiling through leaking roofs or air conditioning drain pipes, it may result in fungal growth.



POP: like i said, POP is stronger, we build Pop boards using Filas (Which serves as the skeletal system) ,water & PoP cement.

We can always determine the quality of a POP board. (This is where hiring a Professional comes in Place)

Once POP Board is made, it gets stronger as it dries up. After a month of installation it's get even stronger.
it's Cost effective than plaster Board.
Repairs can be easily Done, Mistakes can be easily corrected as well.


Disadvantages : using POP cement for Tv console or false ceiling. Pop making process can be Very Messy.

Preparation & installation Process is Tedious unlike the latter very easy Process & clean method

Time Consuming.

Nota bene= Depending on who you hire. Your POP works can either be of Standard quality or Fail out.


Hope this will help.