Lahiko:
Pls I need a very good quality Spanish tiles..
Who do u recommend?

twinskenny:
lol family wahala

abdulwastecx:


Why do you need to have a concrete fascia on a house built with a 6" none load-bearing wall?

The problem with the fascia is not only the reaction load on the walls but the twisting moment generated due to its cantilevered nature. To have a fascia, the house must have beams that must be connected to a well-spaced column. In other world must be a kind of frame.

My advice, don't do the fascia and if the veranda space is not more than 3m go ahead with the constriction but make sure the beam is at the head beam level and it must span across the entire wall. Otherwise, consult an engineer or a builder with know how.

money121:
Good morning

twinskenny:
lol family wahala

Abolarin91:
3m is ok for head-room, residential.

abdulwastecx:


Why do you need to have a concrete fascia on a house built with a 6" none load-bearing wall?

The problem with the fascia is not only the reaction load on the walls but the twisting moment generated due to its cantilevered nature. To have a fascia, the house must have beams that must be connected to a well-spaced column. In other world must be a kind of frame.

My advice, don't do the fascia and if the veranda space is not more than 3m go ahead with the constriction but make sure the beam is at the head beam level and it must span across the entire wall. Otherwise, consult an engineer or a builder with know how.

FreeConCiencE:


Thanks

FreeConCiencE:


Thanks

gordonbarrett:
You can use fiber cement board after the woodwork. Screed and paint. It looks exactly like parapet when properly done.

sonnie10:

Can this fiber cement board prevent people entering the house through the ceiling like parapet

FreeConCiencE:
By

For extra strength to be able to carry the veranda beam and parapet. And what if the german floor is broken to get the footing of the columns from the ground. Or can l still use the 6inches blocks for external walls with necessary columns footed from the ground.?

abdulwastecx:


Why do you need to have a concrete fascia on a house built with a 6" none load-bearing wall?

The problem with the fascia is not only the reaction load on the walls but the twisting moment generated due to its cantilevered nature. To have a fascia, the house must have beams that must be connected to a well-spaced column. In other world must be a kind of frame.

My advice, don't do the fascia and if the veranda space is not more than 3m go ahead with the constriction but make sure the beam is at the head beam level and it must span across the entire wall. Otherwise, consult an engineer or a builder with know how.

omooba25:
Please house...what is the woodwork guidelines for stone coated roof as regards purlin,rafter and valley gutter spacing.

Oflaylay:
Please experience people in the house, what is the bricklayer labor cost of plastering a four-bedroom(all ensuite) bungalow with a kitchen and dining? then secondly, how many tons of plaster sand and how many bags of cement will be needed? Thanks in advance.

topsy23:


Did you graduated from FUTA ?

Barcelona2021:
Good day Nairalanders, please I need a job in a construction site in Lagos.

gordonbarrett:
You can use fiber cement board after the woodwork. Screed and paint. It looks exactly like parapet when properly done.

money121:

Tested ok
I recommend him

QSFemi:
What are your skills?

opes:


Nigerite is even selling fibre cement fascia board now. Do you know the price please?

Aventures:
Weldone bro, best advice.