gandkiss:


Thanks sir,
What of wc do you install the wc before tiles or after?

WC after floor and wall tiles of the toilets

michlins:
door leaf before tiles

EgunMogaji2:



Tiles first, then doors. On my project.

You are both correct, because it depends on the type of doors. If the doors are the types that are made with their frames, then you need to fit the doors before doing tiles, leaving a clearancefrom the floor for the tiles. But if the doors are those whose frames can be fitted first and the door leaf later, then you can fit in the door frames, do the tiles and then hang the door leafs.

All tiles will be completed before the WC.

for your pop designs and installations... get in touch

https://www.nairaland.com/6564561/pop-design-tv-wall-installation

07088534661

thank you

Chekitaut ? ...anyone heard from him lately...it's been a while .

gandkiss:


Thanks sir,
What of wc do you install the wc before tiles or after?

After tiles for me.

dongc:
Chekitaut ? ...anyone heard from him lately...it's been a while .

Very true, as well as HSL.

Thinking of Hug Lee, a China Man I heard about.

EgunMogaji2:
Thinking of Hug Lee, a China Man I heard about.

Egun stop it…

KolaShangOne:



Egun stop it…

By the way, Ibadan folks, Maduabuchi is open again

EgunMogaji2:


Very true, as well as HSL.

alongside the OAK guy, Uncleeth.

UC92:

Bought Unicem #3280 per bag last Tuesday at IMO state.

Where exactly in Imo state do you buy for this price? Am not sure why am paying 3600 for a bag of Dangote cement... I really don't care about the make, I just want a cheap cement.

michlins:
The front and back shots.

The close up shot too

Client is from here too

If I want design on the back of my own doors, is it achievable? With same quality of materials.

Nero2424:


Where exactly in Imo state do you buy for this price? Am not sure why am paying 3600 for a bag of Dangote cement... I really don't care about the make, I just want a cheap cement.

na so my brother dangote cement here around redemption camp is 4K to site still cheaper at your end

sonnie10:


If I want design on the back of my own doors, is it achievable? With same quality of materials.

here's what I can do for you, I can use put the design pan on front and back. In-between them is noise insulator. It's a bit heavier than normal door and has same feel like turkey doors


Good morning sir

Nero2424:


Where exactly in Imo state do you buy for this price? Am not sure why am paying 3600 for a bag of Dangote cement... I really don't care about the make, I just want a cheap cement.

Naze building materials market owerri and
Afo Oru building materials market Ahiazu Mbaise.

michlins:
here's what I can do for you, I can use put the design pan on front and back. In-between them is noise insulator. It's a bit heavier than normal door and has same feel like turkey doors


Good morning sir

Are you going to fill up the cavity in between with an insulating material?
One thing I detest about iron doors is the noise it resonates when hit or blown by wind.

Thanks for your advice on the gate work, it came out fine.

UC92:

Are you going to fill up the cavity in between with an insulating material?
One thing I detest about iron doors is the noise it resonates when hit or blown by wind.

Thanks for your advice on the gate work, it came out fine.

sure it will have insulating material which eliminates the noise

And about the gate, I'm happy to help

Yes, I understand!

michlins:
it's not really that expensive if you factor in the current cost of materials and the value you are getting

Yes boss!!!!

RockOfAgesAlumi:

No problem when the time comes remember me sir
Thanks

Good morning Nigerians. Glad we had lovely and pleasant weekend. Let's know about another Grade of Value Product. A premium grade of VALUE PAINTS Product.
Plus Excel Emulsion is a Premium Quality Product, guaranteed to give a smooth and lasting finish. It is formulated with light fast and weather resistant pigments and binders. It has excellent scrub resistance and fortified with both in can and dry film properties.
For a direct supply of Value Paint Products from the Company, Quality and batch intact,
Contact-: Mr NASS
Coporate Sales Excecutive.
WhatsApp and calls. 08163862804.
valuepaints188@gmail.com
A trial will convince You.
https://www.nairaland.com/6626105/value-paints-value-plus

UC92:

Are you going to fill up the cavity in between with an insulating material?
One thing I detest about iron doors is the noise it resonates when hit or blown by wind.

Thanks for your advice on the gate work, it came out fine.

Nice lookout I like the gate

michlins:
here's what I can do for you, I can use put the design pan on front and back. In-between them is noise insulator. It's a bit heavier than normal door and has same feel like turkey doors

Good morning sir

Oga mi, clarify this completely, what material is the noise insulator. In fact show a picture of a fully completed door so there's no ambiguity.

I come with calvary greetings and peace.

folmus:


alongside the OAK guy, Uncleeth.

Very thoughtful sir.

UC92:

Are you going to fill up the cavity in between with an insulating material?
One thing I detest about iron doors is the noise it resonates when hit or blown by wind.

Thanks for your advice on the gate work, it came out fine.

I believe the disadvantages of this kind of fenced in gate is more than the advantages, I may be wrong though. (looking at it from the security aspect).

Beautiful looking gate you've got there.

EgunMogaji2:


Oga mi, clarify this completely, what material is the noise insulator. In fact show a picture of a fully completed door so there's no ambiguity.

I come with calvary greetings and peace.

you mean I should teach you step by step process by which I do my work. It's a trade I spent years learning. If you want a sample, I can make one and send across to you.


I can tell you how I make it and you will tell your welder same and have it done for you. It's not like I patented the process.

Here are what you need to know, the door will be soundproof to a very high extent, the front and back will look exactly the same as two pans will be used instead of one. And it will be a twice heavier than normal door.


Stay safe and enjoy the new week

michlins:
you mean I should teach you step by step process by which I do my work. It's a trade I spent years learning. If you want a sample, I can make one and send across to you.


I can tell you how I make it and you will tell your welder same and have it done for you. It's not like I patented the process.

Here are what you need to know, the door will be soundproof to a very high extent, the front and back will look exactly the same as two pans will be used instead of one. And it will be a twice heavier than normal door.


Stay safe and enjoy the new week

Smiles. Can I share my own way of doing it?m though?

There’s no harm in sharing knowledge with others.

As a matter of fact, I tell people you become more valuable by adding value to more people everyday.

________

I can tell you there are several people here who wants these type of doors minus the creaking sound.

michlins:
you mean I should teach you step by step process by which I do my work. It's a trade I spent years learning. If you want a sample, I can make one and send across to you.

I can tell you how I make it and you will tell your welder same and have it done for you. It's not like I patented the process.

Here are what you need to know, the door will be soundproof to a very high extent, the front and back will look exactly the same as two pans will be used instead of one. And it will be a twice heavier than normal door.

Stay safe and enjoy the new week

Dude, I've said this to you before, there's nothing you personally can teach me. Nothing.

I was simply trying to help out based on the screw up with a client that felt you cheated her because you didn't fully disclose. I'm not your regular person on here dude. There's nothing you have been doing that's worth me copying you. Nothing.

This won't happen again I assure you.

somehow:


I believe the disadvantages of this kind of fenced in gate is more than the advantages, I may be wrong though. (looking at it from the security aspect).

Beautiful looking gate you've got there.

What are the disadvantages if I may ask?

I have a similar arrangement.

n3xt:


Smiles. Can I share my own way of doing it?m though?

There’s no harm in sharing knowledge with others.

As a matter of fact, I tell people you become more valuable by adding value to more people everyday.

________

I can tell you there are several people here who wants these type of doors minus the creaking sound.

He's actuality silly thinking that I'm interested in copying anything that he's doing.

I was just trying to help out by encouraging full disclosure.

I won't make the same mistake again.

For anyone interested in sound proof and armored doors, user https://www.nairaland.com/muyesky gave us a lesson on this back in 2013 on this post https://www.nairaland.com/1410552/security-armored-doors-burglary-proofs/1

The full thread is https://www.nairaland.com/1410552/security-armored-doors-burglary-proofs and worth reading if you're in that stage of building.

I'm not sure if he's still selling doors and gates but back when he was still posting he was very good at educating us.