₦airaland Forum

So am about to change some A/C parts in my car. I got the oil recommendation from the service manual shown below.

From the recommendation and the parts i am changing, a total of 70ml is what is recommended to be added for

Condenser 25ml
Dryer 25ml
Line 10ml
Leakage 10ml.

My leak is on the discharge pipe from compressor to condenser. I recently started to notice oil on the pipe and had been losing gas. The last recharge didn't last a week and the pipe is completely wet will oil.

I am just a little scared knowing that too little oil risk the compressor seizing up while too much oil reduces cooling.

I am tempted to put 50 or 60ml instead of the 70ml. What do you think? In fact, i want to settle for 55ml. Neither full nor short.

adanny01:
So am about to change some A/C parts in my car. I got the oil recommendation from the service manual shown below.

From the recommendation and the parts i am changing, a total of 70ml is what is recommended to be added for

Condenser 25ml
Dryer 25ml
Line 10ml
Leakage 10ml.

My leak is on the discharge pipe from compressor to condenser. I recently started to notice oil on the pipe and had been losing gas. The last recharge didn't last a week and the pipe is completely wet will oil.

I am just a little scared knowing that too little oil risk the compressor seizing up while too much oil reduces cooling.

I am tempted to put 50 or 60ml instead of the 70ml. What do you think? In fact, i want to settle for 55ml. Neither full nor short.

Leak - 25mls.
Dryer 10mls
Personally, will put the total as recommended.

Piyke:
Leak - 25mls.
Dryer 10mls
Personally, will put the total as recommended.

Yeah right.

I couldn't get the pipe locally new or toks. So i proceeded to do it the kazeem way, weld. I took out the pipe and it was dripping oil. Its very obvious that if that short pipe is dripping so much oil, i guess the recommendation is right so 70ml it is.

adanny01:
So am about to change some A/C parts in my car. I got the oil recommendation from the service manual shown below.

From the recommendation and the parts i am changing, a total of 70ml is what is recommended to be added for

Condenser 25ml
Dryer 25ml
Line 10ml
Leakage 10ml.

My leak is on the discharge pipe from compressor to condenser. I recently started to notice oil on the pipe and had been losing gas. The last recharge didn't last a week and the pipe is completely wet will oil.

I am just a little scared knowing that too little oil risk the compressor seizing up while too much oil reduces cooling.

I am tempted to put 50 or 60ml instead of the 70ml. What do you think? In fact, i want to settle for 55ml. Neither full nor short.

Please OP, what type of refrigerant do you use or suggest for honda AC system?

calculation:
Please OP, what type of refrigerant do you use or suggest for honda AC system?

Its is written in the engine compartment of your car unless the sticker was removed.

Mine is r134a

adanny01:
Its is written in the engine compartment of your car unless the sticker was removed.

Mine is r134a

I know that R134a is the type, but am asking for the real name on refrigerant Can that you use, whenever there is need to recharge your Honda AC in your area or Abuja. Thanks

Abeg reason my matter.

adanny01:
Its is written in the engine compartment of your car unless the sticker was removed.

Mine is r134a

calculation:
I know that R134a is the type, but am asking for the real name on refrigerant Can that you use, whenever there is need to recharge your Honda AC in your area or Abuja. Thanks