stanlotion:
Pls help me resolve this. I don't know what is wrong with my tiny light camry, if it is left idling, it will be like that for a few minutes, then it goes off. It won't restart immediately until you give it a minute or so. Don't know what is really wrong. Pls help.

A lot of things can cause such anomaly. Please, scan the car and post codes here.

lareine:
My mechanic suggested that I should change my back brakes, which I did. Now my brakes are worse. I'm told that the master brake is bad.
My car model is Toyota Avensis

lol... i was told my master was bad as it appeared my breaks were slipping when idling and on gear. i took it for repairs and after the breaks were worked on it was worse. I asked the guy how the hell did you give me this car and breaks no de am and u tell me its ok. i quarrelled him extensively and i took it to another guy who replaced the nipples, bled the system and its okay now.

pls i have this noise called vvt rattle on my es 300. it only does on cold start. i have learnt it is a common problem of vvt engines and it is everywhere on youtube. I started noticing it as i clocked 265k miles on my car and she is still going fast. I plan to keep her till 500k miles. The mechs i have showed this problem asked about oil lights, i have none. Check engine light showed one o2 sensor is bad which i am replacing today. I used to have an oil shorting, breaking seals and smoking problems all of which were fixed after i replaced pvc valve and hose. the mechs say the noise is from the cam but i need to know what part of the cam and how many of them that needs to be replaced because i donot want any trial and error that will most certainly ruin this baby. i use fully synthetic 5w 30 which i change every 1500 miles for safety.

I got a new transmission for my Honda Accord exactly a year ago and it was working and shifting fine till the day I took my car to the mechanic for them to work on my injector mouth,I noticed immediately I left the mechanic my car transmission started shifting at 3rpm when normally it shifts to the next gear between 1.5rpm to 2rpm.please help as this is giving me a serious concern.

MedicH:
pls i have this noise called vvt rattle on my es 300. it only does on cold start. i have learnt it is a common problem of vvt engines and it is everywhere on youtube. I started noticing it as i clocked 265k miles on my car and she is still going fast. I plan to keep her till 500k miles. The mechs i have showed this problem asked about oil lights, i have none. Check engine light showed one o2 sensor is bad which i am replacing today. I used to have an oil shorting, breaking seals and smoking problems all of which were fixed after i replaced pvc valve and hose. the mechs say the noise is from the cam but i need to know what part of the cam and how many of them that needs to be replaced because i donot want any trial and error that will most certainly ruin this baby. i use fully synthetic 5w 30 which i change every 1500 miles for safety.

You did not specify the year model of your car. Some es300 do not have vvt-I (1991-2000).
That said, you’d need to replace two vvt-I cams and both are situated on the intake cams of the engine.

Lascode:
I got a new transmission for my Honda Accord exactly a year ago and it was working and shifting fine till the day I took my car to the mechanic for them to work on my injector mouth,I noticed immediately I left the mechanic my car transmission started shifting at 3rpm when normally it shifts to the next gear between 1.5rpm to 2rpm.please help as this is giving me a serious concern.

You did not specify the year and engine type of your car.

For now, stop driving that car and have it scanned, post codes here and we shall help you tell you what options you have left.

kingreign:

You did not specify the year and engine type of your car.

For now, stop driving that car and have it scanned, post codes here and we shall help you tell you what options you have left.

The car is a 2004 Honda Accord and 4 cylinder engine.

Lascode:

The car is a 2004 Honda Accord and 4 cylinder engine.

Alright then, pls scan the car and post the codes here so we can assist.

kingreign:

Your VVTi is the cause. Do you use a 4 cylinder or v6?

Please, any idea of how much is this VVT-i for corolla s 2008? OEM please. I was recommended to change mine due this rattling sound on early morning starting and also when the vehicle is packed for many hours.

BwalaMarama:


Please, any idea of how much is this VVT-i for corolla s 2008? OEM please. I was recommended to change mine due this rattling sound on early morning starting and also when the vehicle is packed for many hours.

Greetings to you Sir,
Please, what’s the type of engine and which of the VVT-i do you need?
Intake or exhaust?

@kingreign

P0141.... oxygen heater circuit

P02185... Coolant temperature sensor circuit high.

P01157 A/f sensor....

I don't have indomie. I don't know if my downstream O2 sensor is bad, unplugged, whatever.

I am in Abuja.

What do you think?

Originakalokalo:
@kingreign

P0141.... oxygen heater circuit

P02185... Coolant temperature sensor circuit high.

P01157 A/f sensor....

I don't have indomie. I don't know if my downstream O2 sensor is bad, unplugged, whatever.

I am in Abuja.

What do you think?

What car is this pls?
It’s fixable do holla at me if it’s okay by you.

kingreign:


What car is this pls?
It’s fixable do holla at me if it’s okay by you.

Honda Accord DC.

4cyl.

@kingreign

How do I reach you?

Originakalokalo:


Honda Accord DC.

4cyl.

Tomorrow 11AM we can fix it

kingreign:


Tomorrow 11AM we can fix it

How do I reach you?

@kingreign

Originakalokalo:


How do I reach you?

@kingreign

07034581213
Calls and Whatsapp

Good day, what could make RPM to be going down Each time I engage brakes , it’s drop full to 100 even it off mostly I notice it if d car is fully hot MODEL HONDA CIVIC 2000 Tnks so much.

IDRIS92:
Good day, what could make RPM to be going down Each time I engage brakes , it’s drop full to 100 even it off mostly I notice it if d car is fully hot MODEL HONDA CIVIC 2000 Tnks so much.

Your IACV is clogged or worn out.

Good day house
Please I drive Honda Accord (baby boy) when ever I put pressure on acceleration the car will jack. Please come to my rescue.
Thanks

Amoo245:
Good day house
Please I drive Honda Accord (baby boy) when ever I put pressure on acceleration the car will jack. Please come to my rescue.
Thanks

This is hard to remotely diagnose or advice, pls, let a professional carry out diagnosis on the car to find what’s causing such issues.

lareine:
My mechanic suggested that I should change my back brakes, which I did. Now my brakes are worse. I'm told that the master brake is bad.
My car model is Toyota Avensis

Look for people that specialize in brake repairs, brake masters.
Ask your mechanic to refer you to a brake master to fix your brake.
Mechanics are not brake specialists.

Good day Guys,I drive a Hyundai Elantra 2010 model,it's emits black smoke and consume fuel, please where can I get a good Hyundai auto repair specialist in Abuja.Thamks

Zonto231:
Good day Guys,I drive a Hyundai Elantra 2010 model,it's emits black smoke and consume fuel, please where can I get a good Hyundai auto repair specialist in Abuja.Thamks

Good evening, 07034581213 contact

My car name is Pontiac vibe gt 2003 model, with 2zz engine, the engine got bad so I decided to replace it with 1zz engine, I was not have enough money with me so I sold out the 2zz engine and 1zz , the problem now is that once I start the engine it will start but it will not raise well pls what should I do

Sollyjazzy:
My car name is Pontiac vibe gt 2003 model, with 2zz engine, the engine got bad so I decided to replace it with 1zz engine, I was not have enough money with me so I sold out the 2zz engine and 1zz , the problem now is that once I start the engine it will start but it will not raise well pls what should I do

Where is the car located?
It’s always best to keep a car the way it was manufactured except there’s a known fault with that manufacturing.

That said, your car needs to be scanned and then your question answered.

Aishat056:
2YEARS CANADA �� WORK VISA AVAILABLE
GO TO THE PHOTO BELOW ⬇️ FOR CONTACT INFORMATION

SMH!

Pls my car Toyota Camry 2008 sometimes jerks while on motion or changing gear,what could be the issue ND possible solution.thanks

Pussysucker17:
Pls my car Toyota Camry 2008 sometimes jerks while on motion or changing gear,what could be the issue ND possible solution.thanks

Sir, thank you for reaching out to me, I don’t know what is the cause. I would however recommend a diagnosis to zero in on what’s wrong with the car then we know what steps to take in order to solve it.

Please I need help. My camry 2007 foward gear stopped working. We noyiced that the transmission was leaking. We have fixed the leavk and replaced the oil with Toyota WS fluid yet the transmission is still not working.

Meanwhile a scan showed no error.

Please help.

eginaP:
Please I need help. My camry 2007 foward gear stopped working. We noyiced that the transmission was leaking. We have fixed the leavk and replaced the oil with Toyota WS fluid yet the transmission is still not working.

Meanwhile a scan showed no error.

Please help.

Location of the car?
Physical inspection is necessary. If you’re in Abuja do contact 07034581213 to check the car and recommend what is best.

Please I really need help concerning my Camry 07 gear , Firstly let me tell u what happened ,I suddenly notice my gear select late and when I discovered I notice water enter d oil but I was surprised I didn’t enter any water so I was told from the radiator there’s a pipe that connect them and probably it leaks ,they tried all sort of tricks like flushing it but no avail and the drive stopped and only the reverse work fine and I was introduced to a gear operator ,he scanned it and this were d code below �

P0748:- Pressure Control solenoid A Electrical
P0778: Pressure Control Solenoid BElectrical
P0798 : Pressure Control Solenoid Electrical
P0983: Shift SolenodD Control Gieuit High
P0986: Shift Solenoid E Control Circuit High
P2716° Pressure Control Solenoid D Electrical
p2770: Torque Converter Clutch Circuit High

He ask for money that he will buy d drive which I gave him and other money ,he remove the gear and said he clean everything and replace the things needed but when done it’s still d same and only d reverse still work only please help me ���� I paid almost 150k already