.

kingreign:


No name, year of production or model of car.

The car is a Toyota Camry drop light 2002

onyii255:
Greetings my people..

I have an issue with my 2012 Camry. I noticed yesterday that the R sign on the dashboard blinks when I engage the reverse gear and the vehicle jerks when the reverse gear is engaged as well.

I don’t experience that kick when I shift to Drive, it only occurs when Reverse is engaged.

What’s could be the issue please??

Plss my muscle Camry just started doing the same thing did you get a solution to your own ??

wilsonjay:
The car is a Toyota Camry drop light 2002

Have someone competent check your car and fix it. I can’t advise you better than this cos remote assistance in this case won’t offer much.

sewenbigboi:

Plss my muscle Camry just started doing the same thing did you get a solution to your own ??

Scan and post code here

kingreign:


Scan and post code here

Okay I’ll do that tomorrow

kingreign:


Have someone competent check your car and fix it. I can’t advise you better than this cos remote assistance in this case won’t offer much.

Thanks sir

Good evening HONDA gurus,my 04 honda EOD gear doesn't select freely when the AC is ON but select freely without the AC. Help me out pls

Good evening HONDA gurus,my 04 honda EOD gear doesn't select freely when the AC is ON but select freely without the AC. Help me out pls[color=#770077][/color]

Anawo13:
Good evening HONDA gurus,my 04 honda EOD gear doesn't select freely when the AC is ON but select freely without the AC. Help me out pls[color=#770077][/color]

Have a competent technician check it. Remote assistance or advise on this case is unavailable pls.

kingreign please kindly help out as much as you can; I won't mind calling you on phone or sending whatsapp messages if you permit. Here's the case with my car: 2008 Accord V6, location outside Lagos. Car started misfiring on 2 cylinders (cylinders 2 & 4). Sparks plugs were changed for all cylinders, no change. Ignition coils were replaced, no improvement. Injector nozzles were replaced, fault codes change to cylinders 5 & 6! Nozzles were replaced at 5 & 6, misfire reduced for a few minutes and starts again. At this point, the following symptoms are presented: cylinder misfires, hard starting after car runs for a short distance, strong smell of petrol in the car, howling sound from the silencer (I guess unburnt fuel is getting into the exhaust directly and burning there), knocking sound from the engine after a while (not continuous), very crazy fuel consumption, engine revs itself after 2 minutes of starting up, flashing CEL. Curiously, the only codes that come up are for cylinder misfire! I'm at my wits end!

symbianDON:
kingreign please kindly help out as much as you can; I won't mind calling you on phone or sending whatsapp messages if you permit. Here's the case with my car: 2008 Accord V6, location outside Lagos. Car started misfiring on 2 cylinders (cylinders 2 & 4). Sparks plugs were changed for all cylinders, no change. Ignition coils were replaced, no improvement. Injector nozzles were replaced, fault codes change to cylinders 5 & 6! Nozzles were replaced at 5 & 6, misfire reduced for a few minutes and starts again. At this point, the following symptoms are presented: cylinder misfires, hard starting after car runs for a short distance, strong smell of petrol in the car, howling sound from the silencer (I guess unburnt fuel is getting into the exhaust directly and burning there), knocking sound from the engine after a while (not continuous), very crazy fuel consumption, engine revs itself after 2 minutes of starting up, flashing CEL. Curiously, the only codes that come up are for cylinder misfire! I'm at my wits end!

Sorry you’re going thru this crazy experience.
Let’s start from the basics, what was the last repair job done on the car that caused this to happen or did the car suddenly decide to have automobile madness and rabies on its own?

Did the car swim or did an electrical short circuit occurred?

kingreign:


Sorry you’re going thru this crazy experience.
Let’s start from the basics, what was the last repair job done on the car that caused this to happen or did the car suddenly decide to have automobile madness and rabies on its own?

Did the car swim or did an electrical short circuit occurred?

the last repair job was noozle and coil replacement. Car hasn't had any flood issues.

symbianDON:
the last repair job was noozle and coil replacement. Car hasn't had any flood issues.

Did you swap coils from 1,2 into 3 &4 to test?
If you did and the result stays same, try injectors swap too. Also, do check the Sparkplugs and let me know the result.

kingreign:

Did you swap coils from 1,2 into 3 &4 to test?
If you did and the result stays same, try injectors swap too. Also, do check the Sparkplugs and let me know the result.

yes!! I have done all that; swapped/changed coils, replaced all plugs and replaced injectors...yet the result remains same. I forgot to add that timing belt was replaced too some time ago.

symbianDON:
yes!! I have done all that; swapped/changed coils, replaced all plugs and replaced injectors...yet the result remains same. I forgot to add that timing belt was replaced too some time ago.

Carry out compression tests, and leak test on that car pls.

That said, the J35Z2 with VCM are known for their damaging Sparkplugs due to the VCM operation and this may in-turn damage the engines

kingreign:


Carry out compression tests, and leak test on that car pls.

That said, the J35Z2 with VCM are known for their damaging Sparkplugs due to the VCM operation and this may in-turn damage the engines

ok. Thanks so much. I really appreciate this.

symbianDON:
ok. Thanks so much. I really appreciate this.

You may also wish to check the spool valve.
From some quarters (unverified by me), it can cause misfires.

How can I resolve a Toyota corolla 2009 with P0717 error code - Input/turbine speed sensor.

Car sometimes jerks before changing gear from 1 to 2 and 2 to 3.

And it doesn't enter gear 4.

kingreign:


You may also wish to check the spool valve.
From some quarters (unverified by me), it can cause misfires.

ok. I will also check it.

alaricsaltzman:
How can I resolve a Toyota corolla 2009 with P0717 error code - Input/turbine speed sensor.

Car sometimes jerks before changing gear from 1 to 2 and 2 to 3.

And it doesn't enter gear 4.

You need to carry out physical checks on the wiring on the transmission. There are two sensors on top the transmission and it has two wires each which plugs into the sensors via sockets. Have a multimeter and read the conductivity of the wires. If it registers, it’s fine. Proceed to the sensor and check the resistivity of the sensor any reading outside 60-680 Ohms range, you replace the sensor.

It’s more of a professional job and less of a DIY job.

If you’re in Abuja and environ, do contact me to fix it.

kingreign:

You need to carry out physical checks on the wiring on the transmission. There are two sensors on top the transmission and it has two wires each which plugs into the sensors via sockets. Have a multimeter and read the conductivity of the wires. If it registers, it’s fine. Proceed to the sensor and check the resistivity of the sensor any reading outside 60-680 Ohms range, you replace the sensor.

It’s more of a professional job and less of a DIY job.

If you’re in Abuja and environ, do contact me to fix it.

Thank you very much.

I'm in Lagos. Can you recommend someone in Lagos?

Also, is it a job for a rewire or a gear master?

alaricsaltzman:


Thank you very much.

I'm in Lagos. Can you recommend someone in Lagos?

Also, is it a job for a rewire or a gear master?

Gazzuzz,

+234 803 391 0382

You need to book an appointment with him

Please what's the cost of quality repainting of 2008 Honda accord?

ManAdii:
Please what's the cost of quality repainting of 2008 Honda accord?

Your location pls?

@kingreign hell of an assistance you are offering to millions of car users. More growth to you.

I am currently based in zaria/Kaduna & I'd like my car checked by someone as good as you within that axis. Would have loved it be you but FCT is a long drive & time is not my friend at the moment.

Do you know anyone you can connect me with?

nitt:
@kingreign hell of an assistance you are offering to millions of car users. More growth to you.

I am currently based in zaria/Kaduna & I'd like my car checked by someone as good as you within that axis. Would have loved it be you but FCT is a long drive & time is not my friend at the moment.

Do you know anyone you can connect me with?

Thank you very much for your kind words, this means a lot to me. I appreciate.
As for your request, unfortunately, I don’t know any one in your axis that I can recommend.

Good morning
I had an alternator changed on my nissan quest 2008 base model yesterday and after installing,car suddenly refused to start,.when key is turned to the on position,dashboard light comes on,with the fan blowing and head light on,when they tried to crank,nothing happens..they have no idea what is wrong.this was suppose to be a simple alternator change.please help me out here boss..

vladhillz:
Good morning
I had an alternator changed on my nissan quest 2008 base model yesterday and after installing,car suddenly refused to start,.when key is turned to the on position,dashboard light comes on,with the fan blowing and head light on,when they tried to crank,nothing happens..they have no idea what is wrong.this was suppose to be a simple alternator change.please help me out here boss..

Does the immobilizer/anti theft security warning light blink when key is inserted in the ignition and turned to the on position?

kingreign:


Does the immobilizer/anti theft security warning light blink when key is inserted in the ignition and turned to the on position?

its seems like,,a red car symbol with key on it

vladhillz:
its seems like,,a red car symbol with key on it

Yes

kingreign:


Yes

its showing